OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A console [ttyS0] enabled console [ttyS0] enabled [drm] radeon kernel modesetting enabled. [drm] radeon kernel modesetting enabled. loop: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbhid: USB HID core driver NET: Registered protocol family 10 NET: Registered protocol family 10 Segment Routing with IPv6 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 17 Key type dns_resolver registered Key type dns_resolver registered bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] disabled bootconsole [early0] disabled Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. EXT4-fs (vda): re-mounted. Opts: (null) Thu Feb 22 15:40:00 UTC 2018 1: lo: mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe12:3456/64 scope link tentative valid_lft forever preferred_lft forever 3: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 default via 10.0.2.2 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 Welcome to the Fedora/RISC-V stage4 builder + set -e + dnf clean all 0 files removed + useradd -d /builddir mockbuild + su -c 'mkdir /builddir/build' mockbuild + echo '%_topdir /builddir/build' + su -c 'rpm -i /var/tmp/gpm-1.20.7-14.fc28.src.rpm' mockbuild + dnf -y builddep /builddir/build/SPECS/gpm.spec Local RPMS 0% [ ] --- B/s | 0 B --:-- ETA Local RPMS 5% [= ] 2.7 MB/s | 847 kB 00:04 ETA Local RPMS 10% [== ] 2.7 MB/s | 1.5 MB 00:04 ETA Local RPMS 18% [===- ] 2.8 MB/s | 2.5 MB 00:04 ETA Local RPMS 25% [===== ] 2.8 MB/s | 3.5 MB 00:03 ETA Local RPMS 32% [======- ] 2.8 MB/s | 4.5 MB 00:03 ETA Local RPMS 39% [=======- ] 2.8 MB/s | 5.5 MB 00:02 ETA Local RPMS 47% [========= ] 2.9 MB/s | 6.5 MB 00:02 ETA Local RPMS 54% [==========- ] 2.9 MB/s | 7.6 MB 00:02 ETA Local RPMS 55% [=========== ] 2.7 MB/s | 7.7 MB 00:02 ETA Local RPMS 61% [============ ] 2.7 MB/s | 8.6 MB 00:01 ETA Local RPMS 68% [=============- ] 2.7 MB/s | 9.6 MB 00:01 ETA Local RPMS 76% [=============== ] 2.7 MB/s | 11 MB 00:01 ETA Local RPMS 80% [================ ] 2.7 MB/s | 11 MB 00:01 ETA Local RPMS 84% [================- ] 2.7 MB/s | 12 MB 00:00 ETA Local RPMS 89% [=================- ] 2.6 MB/s | 12 MB 00:00 ETA Local RPMS 93% [==================- ] 2.6 MB/s | 13 MB 00:00 ETA Local RPMS 98% [===================-] 2.6 MB/s | 14 MB 00:00 ETA Local RPMS 2.1 MB/s | 14 MB 00:06 Last metadata expiration check: 0:01:44 ago on Thu Feb 22 15:40:36 2018. Package gawk-4.2.0-2.fc27.riscv64 is already installed, skipping. Package sed-4.4-4.fc28.riscv64 is already installed, skipping. Package systemd-235-0.3.riscv64.noarch is already installed, skipping. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: autoconf noarch 2.69-26.fc28 local 709 k automake noarch 1.15.1-3.fc28 local 706 k bison riscv64 3.0.4-8.fc28 local 1.0 M libcap-ng-devel riscv64 0.7.8-1.fc27 local 26 k libtool riscv64 2.4.6-21.fc27 local 707 k ncurses-devel riscv64 6.1-2.20180129.fc27 local 527 k texinfo riscv64 6.5-1.fc28 local 1.2 M Installing dependencies: emacs-filesystem noarch 1:25.3-5.fc28 local 67 k kernel-headers noarch 4.15.0-1.fc27 local 1.1 M libpkgconf riscv64 1.4.1-1.fc27 local 74 k m4 riscv64 1.4.18-5.fc28 local 369 k ncurses-c++-libs riscv64 6.1-2.20180129.fc27 local 185 k perl-Carp noarch 1.42-408.fc27.0.riscv64 local 84 k perl-Class-Inspector noarch 1.32-1.fc27 local 35 k perl-Data-Dumper riscv64 2.167-408.fc27.0.riscv64 local 149 k perl-Encode riscv64 4:2.94-16.fc27 local 1.4 M perl-Errno riscv64 1.28-408.fc28.1.riscv64 local 73 k perl-Exporter noarch 5.72-408.fc27.0.riscv64 local 87 k perl-File-Path noarch 2.15-1.fc27 local 37 k perl-File-Temp noarch 0.230.400-408.fc27.0.riscv64 local 103 k perl-Getopt-Long noarch 1:2.50-3.fc27 local 61 k perl-HTTP-Tiny noarch 0.070-408.fc27.0.riscv64 local 97 k perl-IO riscv64 1.38-408.fc28.1.riscv64 local 176 k perl-MIME-Base64 riscv64 3.15-408.fc27.0.riscv64 local 111 k perl-PathTools riscv64 3.67-408.fc27.0.riscv64 local 166 k perl-Pod-Escapes noarch 1:1.07-408.fc27.0.riscv64 local 77 k perl-Pod-Perldoc noarch 3.28-408.fc27.0.riscv64 local 139 k perl-Pod-Simple noarch 1:3.35-408.fc27.0.riscv64 local 271 k perl-Pod-Usage noarch 4:1.69-408.fc27.0.riscv64 local 89 k perl-Scalar-List-Utils riscv64 3:1.48-1.fc27 local 119 k perl-Socket riscv64 4:2.027-1.fc27 local 95 k perl-Storable riscv64 1:2.62-408.fc27.0.riscv64 local 205 k perl-Term-ANSIColor noarch 4.06-408.fc27.0.riscv64 local 94 k perl-Term-Cap noarch 1.17-408.fc27.0.riscv64 local 78 k perl-Text-ParseWords noarch 3.30-408.fc27.0.riscv64 local 73 k perl-Text-Tabs+Wrap noarch 2013.0523-408.fc27.0.riscv64 local 80 k perl-Text-Unidecode noarch 1.30-4.fc27 local 147 k perl-Thread-Queue noarch 3.12-408.fc27.0.riscv64 local 77 k perl-Time-Local noarch 1:1.250-394.fc27 local 30 k perl-Unicode-EastAsianWidth noarch 1.33-11.fc27 local 14 k perl-Unicode-Normalize riscv64 1.25-408.fc27.0.riscv64 local 164 k perl-constant noarch 1.33-408.fc27.0.riscv64 local 79 k perl-interpreter riscv64 4:5.26.1-408.fc28.1.riscv64 local 6.7 M perl-libintl-perl riscv64 1.27-1.fc27 local 862 k perl-libs riscv64 4:5.26.1-408.fc28.1.riscv64 local 3.3 M perl-macros riscv64 4:5.26.1-408.fc28.1.riscv64 local 69 k perl-parent noarch 1:0.236-408.fc27.0.riscv64 local 71 k perl-podlators noarch 4.09-408.fc27.0.riscv64 local 157 k perl-threads riscv64 1:2.21-1.fc27 local 104 k perl-threads-shared riscv64 1.58-1.fc27 local 91 k pkgconf riscv64 1.4.1-1.fc27 local 35 k pkgconf-m4 noarch 1.4.1-1.fc27 local 15 k pkgconf-pkg-config riscv64 1.4.1-1.fc27 local 14 k tar riscv64 2:1.29-7.fc27 local 805 k Installing weak dependencies: perl-File-ShareDir noarch 1.104-2.fc27 local 28 k Transaction Summary ================================================================================ Install 55 Packages Total download size: 23 M Installed size: 73 M Downloading Packages: (1/55): libcap-ng-de 0% [ ] --- B/s | 0 B --:-- ETA (1/55): libcap-ng-devel-0.7.8-1.fc27.riscv64.rp 291 kB/s | 26 kB 00:00 (2-3/55): autoconf-2 0% [ ] 988 kB/s | 90 kB 00:23 ETA (2/55): emacs-filesystem-25.3-5.fc28.noarch.rpm 481 kB/s | 67 kB 00:00 (3-4/55): autoconf-2 0% [ ] 996 kB/s | 221 kB 00:23 ETA (3-5/55): automake-1 4% [- ] 1.1 MB/s | 1.1 MB 00:20 ETA (3-5/55): automake-1 8% [=- ] 1.2 MB/s | 2.0 MB 00:17 ETA (3/55): autoconf-2.69-26.fc28.noarch.rpm 804 kB/s | 709 kB 00:00 (4-5/55): bison-3.0. 8% [=- ] 1.2 MB/s | 2.1 MB 00:17 ETA (4/55): automake-1.15.1-3.fc28.noarch.rpm 757 kB/s | 706 kB 00:00 (5-6/55): libtool-2. 9% [=- ] 1.2 MB/s | 2.2 MB 00:17 ETA (5-7/55): tar-1.29-7 13% [==- ] 1.3 MB/s | 3.1 MB 00:15 ETA (5/55): bison-3.0.4-8.fc28.riscv64.rpm 778 kB/s | 1.0 MB 00:01 (6-7/55): libtool-2. 14% [==- ] 1.3 MB/s | 3.3 MB 00:15 ETA (6-8/55): ncurses-de 17% [===- ] 1.4 MB/s | 4.1 MB 00:13 ETA (6/55): libtool-2.4.6-21.fc27.riscv64.rpm 692 kB/s | 707 kB 00:01 (7-8/55): tar-1.29-7 17% [===- ] 1.4 MB/s | 4.1 MB 00:13 ETA (7/55): tar-1.29-7.fc27.riscv64.rpm 723 kB/s | 805 kB 00:01 (8-9/55): ncurses-de 19% [===- ] 1.4 MB/s | 4.5 MB 00:13 ETA (8/55): ncurses-c++-libs-6.1-2.20180129.fc27.ri 539 kB/s | 185 kB 00:00 (9-10/55): texinfo-6 20% [==== ] 1.4 MB/s | 4.7 MB 00:13 ETA (9/55): ncurses-devel-6.1-2.20180129.fc27.riscv 611 kB/s | 527 kB 00:00 (10-11/55): perl-Tex 20% [==== ] 1.4 MB/s | 4.8 MB 00:13 ETA (10/55): perl-Unicode-EastAsianWidth-1.33-11.fc 555 kB/s | 14 kB 00:00 (11-12/55): perl-Tex 20% [==== ] 1.4 MB/s | 4.9 MB 00:13 ETA (11/55): perl-Text-Unidecode-1.30-4.fc27.noarch 465 kB/s | 147 kB 00:00 (12-13/55): perl-lib 22% [==== ] 1.4 MB/s | 5.2 MB 00:12 ETA (12/55): perl-Carp-1.42-408.fc27.0.riscv64.noar 772 kB/s | 84 kB 00:00 (13-14/55): perl-lib 23% [====- ] 1.4 MB/s | 5.4 MB 00:12 ETA (13/55): perl-Exporter-5.72-408.fc27.0.riscv64. 789 kB/s | 87 kB 00:00 (14-15/55): perl-lib 24% [====- ] 1.4 MB/s | 5.7 MB 00:12 ETA (14/55): perl-Getopt-Long-2.50-3.fc27.noarch.rp 798 kB/s | 61 kB 00:00 (15-16/55): perl-lib 25% [===== ] 1.4 MB/s | 5.9 MB 00:12 ETA (15/55): perl-Pod-Simple-3.35-408.fc27.0.riscv6 924 kB/s | 271 kB 00:00 (16-17/55): texinfo- 28% [=====- ] 1.5 MB/s | 6.7 MB 00:11 ETA (16/55): perl-Data-Dumper-2.167-408.fc27.0.risc 838 kB/s | 149 kB 00:00 (17-18/55): texinfo- 30% [====== ] 1.5 MB/s | 7.2 MB 00:10 ETA (17/55): perl-libintl-perl-1.27-1.fc27.riscv64. 703 kB/s | 862 kB 00:01 (18-19/55): texinfo- 31% [====== ] 1.5 MB/s | 7.3 MB 00:10 ETA (18/55): perl-MIME-Base64-3.15-408.fc27.0.riscv 894 kB/s | 111 kB 00:00 (19-20/55): texinfo- 33% [======- ] 1.5 MB/s | 7.7 MB 00:10 ETA (19/55): texinfo-6.5-1.fc28.riscv64.rpm 616 kB/s | 1.2 MB 00:01 (20-21/55): perl-Enc 34% [======- ] 1.5 MB/s | 7.9 MB 00:10 ETA (20/55): perl-PathTools-3.67-408.fc27.0.riscv64 468 kB/s | 166 kB 00:00 (21-22/55): perl-Sto 35% [======= ] 1.5 MB/s | 8.2 MB 00:09 ETA (21/55): perl-Storable-2.62-408.fc27.0.riscv64. 751 kB/s | 205 kB 00:00 (22-23/55): perl-Uni 36% [======= ] 1.5 MB/s | 8.5 MB 00:09 ETA (22/55): perl-Unicode-Normalize-1.25-408.fc27.0 694 kB/s | 164 kB 00:00 (23-24/55): perl-int 37% [======= ] 1.5 MB/s | 8.7 MB 00:09 ETA (23-25/55): perl-lib 41% [======== ] 1.6 MB/s | 9.5 MB 00:08 ETA (23-25/55): perl-lib 45% [========= ] 1.7 MB/s | 10 MB 00:07 ETA (23-25/55): perl-Enc 49% [=========- ] 1.8 MB/s | 11 MB 00:06 ETA (23/55): perl-Encode-2.94-16.fc27.riscv64.rpm 719 kB/s | 1.4 MB 00:02 (24-25/55): perl-int 49% [=========- ] 1.7 MB/s | 11 MB 00:06 ETA (24/55): perl-Errno-1.28-408.fc28.1.riscv64.ris 784 kB/s | 73 kB 00:00 (25-26/55): perl-int 50% [========== ] 1.7 MB/s | 12 MB 00:06 ETA (25/55): perl-constant-1.33-408.fc27.0.riscv64. 836 kB/s | 79 kB 00:00 (26-27/55): perl-int 51% [========== ] 1.7 MB/s | 12 MB 00:06 ETA (26/55): perl-IO-1.38-408.fc28.1.riscv64.riscv6 845 kB/s | 176 kB 00:00 (27-28/55): perl-int 53% [==========- ] 1.8 MB/s | 12 MB 00:06 ETA (27/55): perl-File-Path-2.15-1.fc27.noarch.rpm 626 kB/s | 37 kB 00:00 (28-29/55): perl-int 54% [==========- ] 1.8 MB/s | 13 MB 00:05 ETA (28/55): perl-Text-Tabs+Wrap-2013.0523-408.fc27 848 kB/s | 80 kB 00:00 (29-30/55): perl-lib 55% [=========== ] 1.8 MB/s | 13 MB 00:05 ETA (29/55): perl-parent-0.236-408.fc27.0.riscv64.n 766 kB/s | 71 kB 00:00 (30-31/55): perl-lib 56% [=========== ] 1.8 MB/s | 13 MB 00:05 ETA (30/55): perl-Scalar-List-Utils-1.48-1.fc27.ris 848 kB/s | 119 kB 00:00 (31-32/55): perl-lib 58% [===========- ] 1.8 MB/s | 13 MB 00:05 ETA (31/55): perl-macros-5.26.1-408.fc28.1.riscv64. 752 kB/s | 69 kB 00:00 (32-33/55): perl-lib 59% [===========- ] 1.8 MB/s | 14 MB 00:05 ETA (32/55): perl-threads-2.21-1.fc27.riscv64.rpm 805 kB/s | 104 kB 00:00 (33-34/55): perl-lib 60% [============ ] 1.8 MB/s | 14 MB 00:05 ETA (33/55): perl-threads-shared-1.58-1.fc27.riscv6 849 kB/s | 91 kB 00:00 (34-35/55): perl-lib 61% [============ ] 1.8 MB/s | 14 MB 00:04 ETA (34/55): perl-Socket-2.027-1.fc27.riscv64.rpm 864 kB/s | 95 kB 00:00 (35-36/55): perl-lib 62% [============- ] 1.8 MB/s | 15 MB 00:04 ETA (35/55): pkgconf-pkg-config-1.4.1-1.fc27.riscv6 487 kB/s | 14 kB 00:00 (36-37/55): perl-lib 63% [============- ] 1.8 MB/s | 15 MB 00:04 ETA (36/55): pkgconf-m4-1.4.1-1.fc27.noarch.rpm 558 kB/s | 15 kB 00:00 (37-38/55): perl-int 63% [============- ] 1.8 MB/s | 15 MB 00:04 ETA (37/55): pkgconf-1.4.1-1.fc27.riscv64.rpm 568 kB/s | 35 kB 00:00 (38-39/55): perl-int 63% [============- ] 1.8 MB/s | 15 MB 00:04 ETA (38/55): libpkgconf-1.4.1-1.fc27.riscv64.rpm 798 kB/s | 74 kB 00:00 (39-40/55): perl-int 64% [============- ] 1.8 MB/s | 15 MB 00:04 ETA (39-41/55): kernel-h 68% [=============- ] 1.9 MB/s | 16 MB 00:03 ETA (39-41/55): kernel-h 72% [============== ] 1.9 MB/s | 17 MB 00:03 ETA (39-41/55): perl-int 76% [=============== ] 2.0 MB/s | 18 MB 00:02 ETA (39/55): kernel-headers-4.15.0-1.fc27.noarch.rp 929 kB/s | 1.1 MB 00:01 (40-41/55): perl-lib 78% [===============- ] 2.0 MB/s | 18 MB 00:02 ETA (40/55): perl-libs-5.26.1-408.fc28.1.riscv64.ri 735 kB/s | 3.3 MB 00:04 (41-42/55): m4-1.4.1 79% [===============- ] 1.8 MB/s | 18 MB 00:02 ETA (41/55): perl-Pod-Escapes-1.07-408.fc27.0.riscv 824 kB/s | 77 kB 00:00 (42-43/55): perl-int 80% [================ ] 1.8 MB/s | 19 MB 00:02 ETA (42/55): perl-Pod-Usage-1.69-408.fc27.0.riscv64 835 kB/s | 89 kB 00:00 (43-44/55): perl-int 82% [================ ] 1.8 MB/s | 19 MB 00:02 ETA (43/55): perl-Text-ParseWords-3.30-408.fc27.0.r 815 kB/s | 73 kB 00:00 (44-45/55): perl-int 83% [================- ] 1.8 MB/s | 19 MB 00:02 ETA (44/55): m4-1.4.18-5.fc28.riscv64.rpm 383 kB/s | 369 kB 00:00 (45-46/55): perl-int 83% [================- ] 1.8 MB/s | 19 MB 00:02 ETA (45/55): perl-Thread-Queue-3.12-408.fc27.0.risc 446 kB/s | 77 kB 00:00 (46-47/55): perl-int 84% [================- ] 1.8 MB/s | 19 MB 00:02 ETA (46/55): perl-Pod-Perldoc-3.28-408.fc27.0.riscv 662 kB/s | 139 kB 00:00 (47-48/55): perl-int 85% [================= ] 1.8 MB/s | 20 MB 00:01 ETA (47/55): perl-podlators-4.09-408.fc27.0.riscv64 681 kB/s | 157 kB 00:00 (48-49/55): perl-int 86% [================= ] 1.8 MB/s | 20 MB 00:01 ETA (48/55): perl-File-Temp-0.230.400-408.fc27.0.ri 576 kB/s | 103 kB 00:00 (49-50/55): perl-int 86% [================= ] 1.8 MB/s | 20 MB 00:01 ETA (49/55): perl-Time-Local-1.250-394.fc27.noarch. 717 kB/s | 30 kB 00:00 (50-51/55): perl-int 86% [================= ] 1.8 MB/s | 20 MB 00:01 ETA (50/55): perl-HTTP-Tiny-0.070-408.fc27.0.riscv6 461 kB/s | 97 kB 00:00 (51-52/55): perl-Ter 87% [================= ] 1.8 MB/s | 20 MB 00:01 ETA (51/55): perl-Term-ANSIColor-4.06-408.fc27.0.ri 612 kB/s | 94 kB 00:00 (52-53/55): perl-Ter 88% [=================- ] 1.8 MB/s | 20 MB 00:01 ETA (52/55): perl-Term-Cap-1.17-408.fc27.0.riscv64. 558 kB/s | 78 kB 00:00 (53-54/55): perl-Fil 88% [=================- ] 1.8 MB/s | 20 MB 00:01 ETA (53/55): perl-File-ShareDir-1.104-2.fc27.noarch 324 kB/s | 28 kB 00:00 (54-55/55): perl-Cla 88% [=================- ] 1.8 MB/s | 20 MB 00:01 ETA (54/55): perl-Class-Inspector-1.32-1.fc27.noarc 537 kB/s | 35 kB 00:00 (55/55): perl-interp 88% [=================- ] 1.8 MB/s | 21 MB 00:01 ETA (55/55): perl-interp 92% [================== ] 1.8 MB/s | 21 MB 00:00 ETA (55/55): perl-interp 96% [=================== ] 1.9 MB/s | 22 MB 00:00 ETA (55/55): perl-interp100% [====================] 2.0 MB/s | 23 MB 00:00 ETA (55/55): perl-interpreter-5.26.1-408.fc28.1.ris 893 kB/s | 6.7 MB 00:07 -------------------------------------------------------------------------------- Total 1.8 MB/s | 23 MB 00:12 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [ ] 1/1 Preparing : [= ] 1/1 Preparing : [== ] 1/1 Preparing : [=== ] 1/1 Preparing : [==== ] 1/1 Preparing : [===== ] 1/1 Preparing : [====== ] 1/1 Preparing : [======= ] 1/1 Preparing : [======== ] 1/1 Preparing : [========= ] 1/1 Preparing : [========== ] 1/1 Preparing : [=========== ] 1/1 Preparing : [============ ] 1/1 Preparing : [============= ] 1/1 Preparing : [============== ] 1/1 Preparing : [=============== ] 1/1 Preparing : [================ ] 1/1 Preparing : [================= ] 1/1 Preparing : [================== ] 1/1 Preparing : [=================== ] 1/1 Preparing : [==================== ] 1/1 Preparing : [===================== ] 1/1 Preparing : [====================== ] 1/1 Preparing : [======================= ] 1/1 Preparing : [======================== ] 1/1 Preparing : [========================= ] 1/1 Preparing : [========================== ] 1/1 Preparing : [=========================== ] 1/1 Preparing : [============================ ] 1/1 Preparing : [============================= ] 1/1 Preparing : [============================== ] 1/1 Preparing : [=============================== ] 1/1 Preparing : [================================ ] 1/1 Preparing : [================================= ] 1/1 Preparing : [================================== ] 1/1 Preparing : [=================================== ] 1/1 Preparing : [==================================== ] 1/1 Preparing : [===================================== ] 1/1 Preparing : [====================================== ] 1/1 Preparing : [======================================= ] 1/1 Preparing : [======================================== ] 1/1 Preparing : [========================================= ] 1/1 Preparing : [========================================== ] 1/1 Preparing : [=========================================== ] 1/1 Preparing : [============================================ ] 1/1 Preparing : [============================================= ] 1/1 Preparing : [============================================== ] 1/1 Preparing : [=============================================== ] 1/1 Preparing : [================================================ ] 1/1 Preparing : [================================================= ] 1/1 Preparing : 1/1 Installing : perl-Exporter-5.72-408.f [ ] 1/55 Installing : perl-Exporter-5.72-408.f [===== ] 1/55 Installing : perl-Exporter-5.72-408.f [======= ] 1/55 Installing : perl-Exporter-5.72-408.f [==================== ] 1/55 Installing : perl-Exporter-5.72-408.f [======================== ] 1/55 Installing : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 1/55 Installing : perl-libs-4:5.26.1-408.f [ ] 2/55 Installing : perl-libs-4:5.26.1-408.f [= ] 2/55 Installing : perl-libs-4:5.26.1-408.f [== ] 2/55 Installing : perl-libs-4:5.26.1-408.f [=== ] 2/55 Installing : perl-libs-4:5.26.1-408.f [==== ] 2/55 Installing : perl-libs-4:5.26.1-408.f [===== ] 2/55 Installing : perl-libs-4:5.26.1-408.f [====== ] 2/55 Installing : perl-libs-4:5.26.1-408.f [======= ] 2/55 Installing : perl-libs-4:5.26.1-408.f [======== ] 2/55 Installing : perl-libs-4:5.26.1-408.f [========= ] 2/55 Installing : perl-libs-4:5.26.1-408.f [========== ] 2/55 Installing : perl-libs-4:5.26.1-408.f [=========== ] 2/55 Installing : perl-libs-4:5.26.1-408.f [============ ] 2/55 Installing : perl-libs-4:5.26.1-408.f [============= ] 2/55 Installing : perl-libs-4:5.26.1-408.f [============== ] 2/55 Installing : perl-libs-4:5.26.1-408.f [=============== ] 2/55 Installing : perl-libs-4:5.26.1-408.f [================ ] 2/55 Installing : perl-libs-4:5.26.1-408.f [================= ] 2/55 Installing : perl-libs-4:5.26.1-408.f [================== ] 2/55 Installing : perl-libs-4:5.26.1-408.f [=================== ] 2/55 Installing : perl-libs-4:5.26.1-408.f [==================== ] 2/55 Installing : perl-libs-4:5.26.1-408.f [===================== ] 2/55 Installing : perl-libs-4:5.26.1-408.f [====================== ] 2/55 Installing : perl-libs-4:5.26.1-408.f [======================= ] 2/55 Installing : perl-libs-4:5.26.1-408.f [======================== ] 2/55 Installing : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 2/55 random: crng init done Installing : perl-Carp-1.42-408.fc27. [ ] 3/55 Installing : perl-Carp-1.42-408.fc27. [==== ] 3/55 Installing : perl-Carp-1.42-408.fc27. [======================== ] 3/55 Installing : perl-Carp-1.42-408.fc27.0.riscv64.noarch 3/55 Installing : perl-Scalar-List-Utils-3 [ ] 4/55 Installing : perl-Scalar-List-Utils-3 [= ] 4/55 Installing : perl-Scalar-List-Utils-3 [== ] 4/55 Installing : perl-Scalar-List-Utils-3 [=== ] 4/55 Installing : perl-Scalar-List-Utils-3 [===== ] 4/55 Installing : perl-Scalar-List-Utils-3 [======== ] 4/55 Installing : perl-Scalar-List-Utils-3 [========== ] 4/55 Installing : perl-Scalar-List-Utils-3 [============= ] 4/55 Installing : perl-Scalar-List-Utils-3 [================ ] 4/55 Installing : perl-Scalar-List-Utils-3 [================== ] 4/55 Installing : perl-Scalar-List-Utils-3 [===================== ] 4/55 Installing : perl-Scalar-List-Utils-3 [====================== ] 4/55 Installing : perl-Scalar-List-Utils-3 [======================= ] 4/55 Installing : perl-Scalar-List-Utils-3 [======================== ] 4/55 Installing : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 4/55 Installing : perl-Text-ParseWords-3.3 [ ] 5/55 Installing : perl-Text-ParseWords-3.3 [======= ] 5/55 Installing : perl-Text-ParseWords-3.3 [======================== ] 5/55 Installing : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noarc 5/55 Installing : m4-1.4.18-5.fc28.riscv64 [ ] 6/55 Installing : m4-1.4.18-5.fc28.riscv64 [= ] 6/55 Installing : m4-1.4.18-5.fc28.riscv64 [== ] 6/55 Installing : m4-1.4.18-5.fc28.riscv64 [=== ] 6/55 Installing : m4-1.4.18-5.fc28.riscv64 [==== ] 6/55 Installing : m4-1.4.18-5.fc28.riscv64 [===== ] 6/55 Installing : m4-1.4.18-5.fc28.riscv64 [====== ] 6/55 Installing : m4-1.4.18-5.fc28.riscv64 [======= ] 6/55 Installing : m4-1.4.18-5.fc28.riscv64 [======== ] 6/55 Installing : m4-1.4.18-5.fc28.riscv64 [========= ] 6/55 Installing : m4-1.4.18-5.fc28.riscv64 [========== ] 6/55 Installing : m4-1.4.18-5.fc28.riscv64 [=========== ] 6/55 Installing : m4-1.4.18-5.fc28.riscv64 [============ ] 6/55 Installing : m4-1.4.18-5.fc28.riscv64 [============= ] 6/55 Installing : m4-1.4.18-5.fc28.riscv64 [============== ] 6/55 Installing : m4-1.4.18-5.fc28.riscv64 [=============== ] 6/55 Installing : m4-1.4.18-5.fc28.riscv64 [================ ] 6/55 Installing : m4-1.4.18-5.fc28.riscv64 [================= ] 6/55 Installing : m4-1.4.18-5.fc28.riscv64 [================== ] 6/55 Installing : m4-1.4.18-5.fc28.riscv64 [=================== ] 6/55 Installing : m4-1.4.18-5.fc28.riscv64 [==================== ] 6/55 Installing : m4-1.4.18-5.fc28.riscv64 [===================== ] 6/55 Installing : m4-1.4.18-5.fc28.riscv64 [====================== ] 6/55 Installing : m4-1.4.18-5.fc28.riscv64 [======================= ] 6/55 Installing : m4-1.4.18-5.fc28.riscv64 [======================== ] 6/55 Installing : m4-1.4.18-5.fc28.riscv64 6/55 Running scriptlet: m4-1.4.18-5.fc28.riscv64 6/55 Installing : perl-Term-ANSIColor-4.06 [ ] 7/55 Installing : perl-Term-ANSIColor-4.06 [==== ] 7/55 Installing : perl-Term-ANSIColor-4.06 [================== ] 7/55 Installing : perl-Term-ANSIColor-4.06 [======================== ] 7/55 Installing : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noarch 7/55 Installing : perl-macros-4:5.26.1-408 [ ] 8/55 Installing : perl-macros-4:5.26.1-408 [======================== ] 8/55 Installing : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 8/55 Installing : perl-Unicode-Normalize-1 [ ] 9/55 Installing : perl-Unicode-Normalize-1 [= ] 9/55 Installing : perl-Unicode-Normalize-1 [== ] 9/55 Installing : perl-Unicode-Normalize-1 [=== ] 9/55 Installing : perl-Unicode-Normalize-1 [==== ] 9/55 Installing : perl-Unicode-Normalize-1 [===== ] 9/55 Installing : perl-Unicode-Normalize-1 [====== ] 9/55 Installing : perl-Unicode-Normalize-1 [======= ] 9/55 Installing : perl-Unicode-Normalize-1 [======== ] 9/55 Installing : perl-Unicode-Normalize-1 [========= ] 9/55 Installing : perl-Unicode-Normalize-1 [========== ] 9/55 Installing : perl-Unicode-Normalize-1 [============ ] 9/55 Installing : perl-Unicode-Normalize-1 [============= ] 9/55 Installing : perl-Unicode-Normalize-1 [============== ] 9/55 Installing : perl-Unicode-Normalize-1 [=============== ] 9/55 Installing : perl-Unicode-Normalize-1 [================ ] 9/55 Installing : perl-Unicode-Normalize-1 [================= ] 9/55 Installing : perl-Unicode-Normalize-1 [================== ] 9/55 Installing : perl-Unicode-Normalize-1 [=================== ] 9/55 Installing : perl-Unicode-Normalize-1 [==================== ] 9/55 Installing : perl-Unicode-Normalize-1 [===================== ] 9/55 Installing : perl-Unicode-Normalize-1 [====================== ] 9/55 Installing : perl-Unicode-Normalize-1 [======================= ] 9/55 Installing : perl-Unicode-Normalize-1 [======================== ] 9/55 Installing : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 9/55 Installing : perl-Errno-1.28-408.fc28 [ ] 10/55 Installing : perl-Errno-1.28-408.fc28 [================= ] 10/55 Installing : perl-Errno-1.28-408.fc28 [======================== ] 10/55 Installing : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 10/55 Installing : perl-PathTools-3.67-408. [ ] 11/55 Installing : perl-PathTools-3.67-408. [== ] 11/55 Installing : perl-PathTools-3.67-408. [=== ] 11/55 Installing : perl-PathTools-3.67-408. [==== ] 11/55 Installing : perl-PathTools-3.67-408. [======= ] 11/55 Installing : perl-PathTools-3.67-408. [========= ] 11/55 Installing : perl-PathTools-3.67-408. [=========== ] 11/55 Installing : perl-PathTools-3.67-408. [============== ] 11/55 Installing : perl-PathTools-3.67-408. [================== ] 11/55 Installing : perl-PathTools-3.67-408. [==================== ] 11/55 Installing : perl-PathTools-3.67-408. [===================== ] 11/55 Installing : perl-PathTools-3.67-408. [====================== ] 11/55 Installing : perl-PathTools-3.67-408. [======================= ] 11/55 Installing : perl-PathTools-3.67-408. [======================== ] 11/55 Installing : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 11/55 Installing : perl-constant-1.33-408.f [ ] 12/55 Installing : perl-constant-1.33-408.f [======= ] 12/55 Installing : perl-constant-1.33-408.f [======================== ] 12/55 Installing : perl-constant-1.33-408.fc27.0.riscv64.noarch 12/55 Installing : perl-File-Path-2.15-1.fc [ ] 13/55 Installing : perl-File-Path-2.15-1.fc [==== ] 13/55 Installing : perl-File-Path-2.15-1.fc [======== ] 13/55 Installing : perl-File-Path-2.15-1.fc [==================== ] 13/55 Installing : perl-File-Path-2.15-1.fc [======================== ] 13/55 Installing : perl-File-Path-2.15-1.fc27.noarch 13/55 Installing : perl-Text-Tabs+Wrap-2013 [ ] 14/55 Installing : perl-Text-Tabs+Wrap-2013 [=== ] 14/55 Installing : perl-Text-Tabs+Wrap-2013 [======== ] 14/55 Installing : perl-Text-Tabs+Wrap-2013 [========= ] 14/55 Installing : perl-Text-Tabs+Wrap-2013 [============== ] 14/55 Installing : perl-Text-Tabs+Wrap-2013 [======================== ] 14/55 Installing : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 14/55 Installing : perl-parent-1:0.236-408. [ ] 15/55 Installing : perl-parent-1:0.236-408. [============ ] 15/55 Installing : perl-parent-1:0.236-408. [======================== ] 15/55 Installing : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 15/55 Installing : perl-threads-shared-1.58 [ ] 16/55 Installing : perl-threads-shared-1.58 [=== ] 16/55 Installing : perl-threads-shared-1.58 [======= ] 16/55 Installing : perl-threads-shared-1.58 [========== ] 16/55 Installing : perl-threads-shared-1.58 [============== ] 16/55 Installing : perl-threads-shared-1.58 [================= ] 16/55 Installing : perl-threads-shared-1.58 [==================== ] 16/55 Installing : perl-threads-shared-1.58 [======================= ] 16/55 Installing : perl-threads-shared-1.58 [======================== ] 16/55 Installing : perl-threads-shared-1.58-1.fc27.riscv64 16/55 Installing : perl-threads-1:2.21-1.fc [ ] 17/55 Installing : perl-threads-1:2.21-1.fc [=== ] 17/55 Installing : perl-threads-1:2.21-1.fc [====== ] 17/55 Installing : perl-threads-1:2.21-1.fc [========= ] 17/55 Installing : perl-threads-1:2.21-1.fc [============= ] 17/55 Installing : perl-threads-1:2.21-1.fc [================ ] 17/55 Installing : perl-threads-1:2.21-1.fc [================== ] 17/55 Installing : perl-threads-1:2.21-1.fc [===================== ] 17/55 Installing : perl-threads-1:2.21-1.fc [====================== ] 17/55 Installing : perl-threads-1:2.21-1.fc [======================= ] 17/55 Installing : perl-threads-1:2.21-1.fc [======================== ] 17/55 Installing : perl-threads-1:2.21-1.fc27.riscv64 17/55 Installing : perl-interpreter-4:5.26. [ ] 18/55 Installing : perl-interpreter-4:5.26. [= ] 18/55 Installing : perl-interpreter-4:5.26. [== ] 18/55 Installing : perl-interpreter-4:5.26. [=== ] 18/55 Installing : perl-interpreter-4:5.26. [==== ] 18/55 Installing : perl-interpreter-4:5.26. [===== ] 18/55 Installing : perl-interpreter-4:5.26. [====== ] 18/55 Installing : perl-interpreter-4:5.26. [======= ] 18/55 Installing : perl-interpreter-4:5.26. [======== ] 18/55 Installing : perl-interpreter-4:5.26. [========= ] 18/55 Installing : perl-interpreter-4:5.26. [========== ] 18/55 Installing : perl-interpreter-4:5.26. [=========== ] 18/55 Installing : perl-interpreter-4:5.26. [============ ] 18/55 Installing : perl-interpreter-4:5.26. [============= ] 18/55 Installing : perl-interpreter-4:5.26. [============== ] 18/55 Installing : perl-interpreter-4:5.26. [=============== ] 18/55 Installing : perl-interpreter-4:5.26. [================ ] 18/55 Installing : perl-interpreter-4:5.26. [================= ] 18/55 Installing : perl-interpreter-4:5.26. [================== ] 18/55 Installing : perl-interpreter-4:5.26. [=================== ] 18/55 Installing : perl-interpreter-4:5.26. [==================== ] 18/55 Installing : perl-interpreter-4:5.26. [===================== ] 18/55 Installing : perl-interpreter-4:5.26. [====================== ] 18/55 Installing : perl-interpreter-4:5.26. [======================= ] 18/55 Installing : perl-interpreter-4:5.26. [======================== ] 18/55 Installing : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 18/55 Installing : perl-Socket-4:2.027-1.fc [ ] 19/55 Installing : perl-Socket-4:2.027-1.fc [=== ] 19/55 Installing : perl-Socket-4:2.027-1.fc [======= ] 19/55 Installing : perl-Socket-4:2.027-1.fc [========== ] 19/55 Installing : perl-Socket-4:2.027-1.fc [============== ] 19/55 Installing : perl-Socket-4:2.027-1.fc [================= ] 19/55 Installing : perl-Socket-4:2.027-1.fc [==================== ] 19/55 Installing : perl-Socket-4:2.027-1.fc [===================== ] 19/55 Installing : perl-Socket-4:2.027-1.fc [====================== ] 19/55 Installing : perl-Socket-4:2.027-1.fc [======================= ] 19/55 Installing : perl-Socket-4:2.027-1.fc [======================== ] 19/55 Installing : perl-Socket-4:2.027-1.fc27.riscv64 19/55 Installing : perl-IO-1.38-408.fc28.1. [ ] 20/55 Installing : perl-IO-1.38-408.fc28.1. [= ] 20/55 Installing : perl-IO-1.38-408.fc28.1. [== ] 20/55 Installing : perl-IO-1.38-408.fc28.1. [=== ] 20/55 Installing : perl-IO-1.38-408.fc28.1. [==== ] 20/55 Installing : perl-IO-1.38-408.fc28.1. [===== ] 20/55 Installing : perl-IO-1.38-408.fc28.1. [====== ] 20/55 Installing : perl-IO-1.38-408.fc28.1. [======= ] 20/55 Installing : perl-IO-1.38-408.fc28.1. [======== ] 20/55 Installing : perl-IO-1.38-408.fc28.1. [=========== ] 20/55 Installing : perl-IO-1.38-408.fc28.1. [============== ] 20/55 Installing : perl-IO-1.38-408.fc28.1. [================= ] 20/55 Installing : perl-IO-1.38-408.fc28.1. [==================== ] 20/55 Installing : perl-IO-1.38-408.fc28.1. [===================== ] 20/55 Installing : perl-IO-1.38-408.fc28.1. [====================== ] 20/55 Installing : perl-IO-1.38-408.fc28.1. [======================= ] 20/55 Installing : perl-IO-1.38-408.fc28.1. [======================== ] 20/55 Installing : perl-IO-1.38-408.fc28.1.riscv64.riscv64 20/55 Installing : perl-Storable-1:2.62-408 [ ] 21/55 Installing : perl-Storable-1:2.62-408 [== ] 21/55 Installing : perl-Storable-1:2.62-408 [==== ] 21/55 Installing : perl-Storable-1:2.62-408 [====== ] 21/55 Installing : perl-Storable-1:2.62-408 [======== ] 21/55 Installing : perl-Storable-1:2.62-408 [========== ] 21/55 Installing : perl-Storable-1:2.62-408 [============ ] 21/55 Installing : perl-Storable-1:2.62-408 [============== ] 21/55 Installing : perl-Storable-1:2.62-408 [================ ] 21/55 Installing : perl-Storable-1:2.62-408 [================== ] 21/55 Installing : perl-Storable-1:2.62-408 [==================== ] 21/55 Installing : perl-Storable-1:2.62-408 [====================== ] 21/55 Installing : perl-Storable-1:2.62-408 [======================== ] 21/55 Installing : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 21/55 Installing : perl-MIME-Base64-3.15-40 [ ] 22/55 Installing : perl-MIME-Base64-3.15-40 [= ] 22/55 Installing : perl-MIME-Base64-3.15-40 [== ] 22/55 Installing : perl-MIME-Base64-3.15-40 [========== ] 22/55 Installing : perl-MIME-Base64-3.15-40 [================== ] 22/55 Installing : perl-MIME-Base64-3.15-40 [======================= ] 22/55 Installing : perl-MIME-Base64-3.15-40 [======================== ] 22/55 Installing : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 22/55 Installing : perl-Data-Dumper-2.167-4 [ ] 23/55 Installing : perl-Data-Dumper-2.167-4 [=== ] 23/55 Installing : perl-Data-Dumper-2.167-4 [==== ] 23/55 Installing : perl-Data-Dumper-2.167-4 [======== ] 23/55 Installing : perl-Data-Dumper-2.167-4 [============ ] 23/55 Installing : perl-Data-Dumper-2.167-4 [=============== ] 23/55 Installing : perl-Data-Dumper-2.167-4 [=================== ] 23/55 Installing : perl-Data-Dumper-2.167-4 [====================== ] 23/55 Installing : perl-Data-Dumper-2.167-4 [======================= ] 23/55 Installing : perl-Data-Dumper-2.167-4 [======================== ] 23/55 Installing : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv64 23/55 Installing : perl-File-Temp-0.230.400 [ ] 24/55 Installing : perl-File-Temp-0.230.400 [=== ] 24/55 Installing : perl-File-Temp-0.230.400 [============ ] 24/55 Installing : perl-File-Temp-0.230.400 [===================== ] 24/55 Installing : perl-File-Temp-0.230.400 [======================== ] 24/55 Installing : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noarch 24/55 Installing : perl-Text-Unidecode-1.30 [ ] 25/55 Installing : perl-Text-Unidecode-1.30 [= ] 25/55 Installing : perl-Text-Unidecode-1.30 [== ] 25/55 Installing : perl-Text-Unidecode-1.30 [=== ] 25/55 Installing : perl-Text-Unidecode-1.30 [==== ] 25/55 Installing : perl-Text-Unidecode-1.30 [===== ] 25/55 Installing : perl-Text-Unidecode-1.30 [====== ] 25/55 Installing : perl-Text-Unidecode-1.30 [======= ] 25/55 Installing : perl-Text-Unidecode-1.30 [======== ] 25/55 Installing : perl-Text-Unidecode-1.30 [========= ] 25/55 Installing : perl-Text-Unidecode-1.30 [========== ] 25/55 Installing : perl-Text-Unidecode-1.30 [=========== ] 25/55 Installing : perl-Text-Unidecode-1.30 [============ ] 25/55 Installing : perl-Text-Unidecode-1.30 [============= ] 25/55 Installing : perl-Text-Unidecode-1.30 [============== ] 25/55 Installing : perl-Text-Unidecode-1.30 [=============== ] 25/55 Installing : perl-Text-Unidecode-1.30 [================ ] 25/55 Installing : perl-Text-Unidecode-1.30 [================= ] 25/55 Installing : perl-Text-Unidecode-1.30 [================== ] 25/55 Installing : perl-Text-Unidecode-1.30 [=================== ] 25/55 Installing : perl-Text-Unidecode-1.30 [==================== ] 25/55 Installing : perl-Text-Unidecode-1.30 [===================== ] 25/55 Installing : perl-Text-Unidecode-1.30 [====================== ] 25/55 Installing : perl-Text-Unidecode-1.30 [======================= ] 25/55 Installing : perl-Text-Unidecode-1.30 [======================== ] 25/55 Installing : perl-Text-Unidecode-1.30-4.fc27.noarch 25/55 Installing : perl-Unicode-EastAsianWi [ ] 26/55 Installing : perl-Unicode-EastAsianWi [=== ] 26/55 Installing : perl-Unicode-EastAsianWi [======== ] 26/55 Installing : perl-Unicode-EastAsianWi [============ ] 26/55 Installing : perl-Unicode-EastAsianWi [======================== ] 26/55 Installing : perl-Unicode-EastAsianWidth-1.33-11.fc27.noarch 26/55 Installing : perl-Pod-Escapes-1:1.07- [ ] 27/55 Installing : perl-Pod-Escapes-1:1.07- [==== ] 27/55 Installing : perl-Pod-Escapes-1:1.07- [======================== ] 27/55 Installing : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarch 27/55 Installing : perl-Term-Cap-1.17-408.f [ ] 28/55 Installing : perl-Term-Cap-1.17-408.f [==== ] 28/55 Installing : perl-Term-Cap-1.17-408.f [======================== ] 28/55 Installing : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 28/55 Installing : perl-Thread-Queue-3.12-4 [ ] 29/55 Installing : perl-Thread-Queue-3.12-4 [===== ] 29/55 Installing : perl-Thread-Queue-3.12-4 [====== ] 29/55 Installing : perl-Thread-Queue-3.12-4 [======================== ] 29/55 Installing : perl-Thread-Queue-3.12-408.fc27.0.riscv64.noarch 29/55 Installing : perl-Time-Local-1:1.250- [ ] 30/55 Installing : perl-Time-Local-1:1.250- [= ] 30/55 Installing : perl-Time-Local-1:1.250- [===== ] 30/55 Installing : perl-Time-Local-1:1.250- [======== ] 30/55 Installing : perl-Time-Local-1:1.250- [========= ] 30/55 Installing : perl-Time-Local-1:1.250- [================= ] 30/55 Installing : perl-Time-Local-1:1.250- [=================== ] 30/55 Installing : perl-Time-Local-1:1.250- [======================== ] 30/55 Installing : perl-Time-Local-1:1.250-394.fc27.noarch 30/55 Installing : perl-HTTP-Tiny-0.070-408 [ ] 31/55 Installing : perl-HTTP-Tiny-0.070-408 [== ] 31/55 Installing : perl-HTTP-Tiny-0.070-408 [============ ] 31/55 Installing : perl-HTTP-Tiny-0.070-408 [===================== ] 31/55 Installing : perl-HTTP-Tiny-0.070-408 [======================== ] 31/55 Installing : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 31/55 Installing : perl-Pod-Simple-1:3.35-4 [ ] 32/55 Installing : perl-Pod-Simple-1:3.35-4 [= ] 32/55 Installing : perl-Pod-Simple-1:3.35-4 [== ] 32/55 Installing : perl-Pod-Simple-1:3.35-4 [=== ] 32/55 Installing : perl-Pod-Simple-1:3.35-4 [==== ] 32/55 Installing : perl-Pod-Simple-1:3.35-4 [====== ] 32/55 Installing : perl-Pod-Simple-1:3.35-4 [======= ] 32/55 Installing : perl-Pod-Simple-1:3.35-4 [========= ] 32/55 Installing : perl-Pod-Simple-1:3.35-4 [========== ] 32/55 Installing : perl-Pod-Simple-1:3.35-4 [=========== ] 32/55 Installing : perl-Pod-Simple-1:3.35-4 [============ ] 32/55 Installing : perl-Pod-Simple-1:3.35-4 [============= ] 32/55 Installing : perl-Pod-Simple-1:3.35-4 [=============== ] 32/55 Installing : perl-Pod-Simple-1:3.35-4 [================ ] 32/55 Installing : perl-Pod-Simple-1:3.35-4 [================= ] 32/55 Installing : perl-Pod-Simple-1:3.35-4 [================== ] 32/55 Installing : perl-Pod-Simple-1:3.35-4 [=================== ] 32/55 Installing : perl-Pod-Simple-1:3.35-4 [==================== ] 32/55 Installing : perl-Pod-Simple-1:3.35-4 [===================== ] 32/55 Installing : perl-Pod-Simple-1:3.35-4 [====================== ] 32/55 Installing : perl-Pod-Simple-1:3.35-4 [======================= ] 32/55 Installing : perl-Pod-Simple-1:3.35-4 [======================== ] 32/55 Installing : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 32/55 Installing : perl-Encode-4:2.94-16.fc [ ] 33/55 Installing : perl-Encode-4:2.94-16.fc [= ] 33/55 Installing : perl-Encode-4:2.94-16.fc [== ] 33/55 Installing : perl-Encode-4:2.94-16.fc [=== ] 33/55 Installing : perl-Encode-4:2.94-16.fc [==== ] 33/55 Installing : perl-Encode-4:2.94-16.fc [===== ] 33/55 Installing : perl-Encode-4:2.94-16.fc [====== ] 33/55 Installing : perl-Encode-4:2.94-16.fc [======= ] 33/55 Installing : perl-Encode-4:2.94-16.fc [======== ] 33/55 Installing : perl-Encode-4:2.94-16.fc [========= ] 33/55 Installing : perl-Encode-4:2.94-16.fc [========== ] 33/55 Installing : perl-Encode-4:2.94-16.fc [=========== ] 33/55 Installing : perl-Encode-4:2.94-16.fc [============ ] 33/55 Installing : perl-Encode-4:2.94-16.fc [============= ] 33/55 Installing : perl-Encode-4:2.94-16.fc [============== ] 33/55 Installing : perl-Encode-4:2.94-16.fc [=============== ] 33/55 Installing : perl-Encode-4:2.94-16.fc [================ ] 33/55 Installing : perl-Encode-4:2.94-16.fc [================= ] 33/55 Installing : perl-Encode-4:2.94-16.fc [================== ] 33/55 Installing : perl-Encode-4:2.94-16.fc [=================== ] 33/55 Installing : perl-Encode-4:2.94-16.fc [==================== ] 33/55 Installing : perl-Encode-4:2.94-16.fc [===================== ] 33/55 Installing : perl-Encode-4:2.94-16.fc [====================== ] 33/55 Installing : perl-Encode-4:2.94-16.fc [======================= ] 33/55 Installing : perl-Encode-4:2.94-16.fc [======================== ] 33/55 Installing : perl-Encode-4:2.94-16.fc27.riscv64 33/55 Installing : perl-Getopt-Long-1:2.50- [ ] 34/55 Installing : perl-Getopt-Long-1:2.50- [=== ] 34/55 Installing : perl-Getopt-Long-1:2.50- [==== ] 34/55 Installing : perl-Getopt-Long-1:2.50- [===== ] 34/55 Installing : perl-Getopt-Long-1:2.50- [====== ] 34/55 Installing : perl-Getopt-Long-1:2.50- [======= ] 34/55 Installing : perl-Getopt-Long-1:2.50- [========= ] 34/55 Installing : perl-Getopt-Long-1:2.50- [=============== ] 34/55 Installing : perl-Getopt-Long-1:2.50- [===================== ] 34/55 Installing : perl-Getopt-Long-1:2.50- [======================== ] 34/55 Installing : perl-Getopt-Long-1:2.50-3.fc27.noarch 34/55 Installing : perl-Pod-Usage-4:1.69-40 [ ] 35/55 Installing : perl-Pod-Usage-4:1.69-40 [== ] 35/55 Installing : perl-Pod-Usage-4:1.69-40 [=== ] 35/55 Installing : perl-Pod-Usage-4:1.69-40 [======== ] 35/55 Installing : perl-Pod-Usage-4:1.69-40 [======================== ] 35/55 Installing : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 35/55 Installing : perl-podlators-4.09-408. [ ] 36/55 Installing : perl-podlators-4.09-408. [= ] 36/55 Installing : perl-podlators-4.09-408. [== ] 36/55 Installing : perl-podlators-4.09-408. [=== ] 36/55 Installing : perl-podlators-4.09-408. [==== ] 36/55 Installing : perl-podlators-4.09-408. [===== ] 36/55 Installing : perl-podlators-4.09-408. [====== ] 36/55 Installing : perl-podlators-4.09-408. [======= ] 36/55 Installing : perl-podlators-4.09-408. [=========== ] 36/55 Installing : perl-podlators-4.09-408. [=============== ] 36/55 Installing : perl-podlators-4.09-408. [================ ] 36/55 Installing : perl-podlators-4.09-408. [================= ] 36/55 Installing : perl-podlators-4.09-408. [===================== ] 36/55 Installing : perl-podlators-4.09-408. [====================== ] 36/55 Installing : perl-podlators-4.09-408. [======================= ] 36/55 Installing : perl-podlators-4.09-408. [======================== ] 36/55 Installing : perl-podlators-4.09-408.fc27.0.riscv64.noarch 36/55 Installing : perl-Pod-Perldoc-3.28-40 [ ] 37/55 Installing : perl-Pod-Perldoc-3.28-40 [= ] 37/55 Installing : perl-Pod-Perldoc-3.28-40 [== ] 37/55 Installing : perl-Pod-Perldoc-3.28-40 [=== ] 37/55 Installing : perl-Pod-Perldoc-3.28-40 [==== ] 37/55 Installing : perl-Pod-Perldoc-3.28-40 [===== ] 37/55 Installing : perl-Pod-Perldoc-3.28-40 [====== ] 37/55 Installing : perl-Pod-Perldoc-3.28-40 [=========== ] 37/55 Installing : perl-Pod-Perldoc-3.28-40 [================ ] 37/55 Installing : perl-Pod-Perldoc-3.28-40 [================= ] 37/55 Installing : perl-Pod-Perldoc-3.28-40 [================== ] 37/55 Installing : perl-Pod-Perldoc-3.28-40 [==================== ] 37/55 Installing : perl-Pod-Perldoc-3.28-40 [===================== ] 37/55 Installing : perl-Pod-Perldoc-3.28-40 [====================== ] 37/55 Installing : perl-Pod-Perldoc-3.28-40 [======================= ] 37/55 Installing : perl-Pod-Perldoc-3.28-40 [======================== ] 37/55 Installing : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 37/55 Installing : perl-libintl-perl-1.27-1 [ ] 38/55 Installing : perl-libintl-perl-1.27-1 [= ] 38/55 Installing : perl-libintl-perl-1.27-1 [== ] 38/55 Installing : perl-libintl-perl-1.27-1 [=== ] 38/55 Installing : perl-libintl-perl-1.27-1 [==== ] 38/55 Installing : perl-libintl-perl-1.27-1 [===== ] 38/55 Installing : perl-libintl-perl-1.27-1 [====== ] 38/55 Installing : perl-libintl-perl-1.27-1 [======= ] 38/55 Installing : perl-libintl-perl-1.27-1 [======== ] 38/55 Installing : perl-libintl-perl-1.27-1 [========= ] 38/55 Installing : perl-libintl-perl-1.27-1 [========== ] 38/55 Installing : perl-libintl-perl-1.27-1 [=========== ] 38/55 Installing : perl-libintl-perl-1.27-1 [============ ] 38/55 Installing : perl-libintl-perl-1.27-1 [============= ] 38/55 Installing : perl-libintl-perl-1.27-1 [============== ] 38/55 Installing : perl-libintl-perl-1.27-1 [=============== ] 38/55 Installing : perl-libintl-perl-1.27-1 [================ ] 38/55 Installing : perl-libintl-perl-1.27-1 [================= ] 38/55 Installing : perl-libintl-perl-1.27-1 [================== ] 38/55 Installing : perl-libintl-perl-1.27-1 [=================== ] 38/55 Installing : perl-libintl-perl-1.27-1 [==================== ] 38/55 Installing : perl-libintl-perl-1.27-1 [===================== ] 38/55 Installing : perl-libintl-perl-1.27-1 [====================== ] 38/55 Installing : perl-libintl-perl-1.27-1 [======================= ] 38/55 Installing : perl-libintl-perl-1.27-1 [======================== ] 38/55 Installing : perl-libintl-perl-1.27-1.fc27.riscv64 38/55 Installing : perl-Class-Inspector-1.3 [ ] 39/55 Installing : perl-Class-Inspector-1.3 [== ] 39/55 Installing : perl-Class-Inspector-1.3 [===== ] 39/55 Installing : perl-Class-Inspector-1.3 [============= ] 39/55 Installing : perl-Class-Inspector-1.3 [=============== ] 39/55 Installing : perl-Class-Inspector-1.3 [================ ] 39/55 Installing : perl-Class-Inspector-1.3 [======================= ] 39/55 Installing : perl-Class-Inspector-1.3 [======================== ] 39/55 Installing : perl-Class-Inspector-1.32-1.fc27.noarch 39/55 Installing : kernel-headers-4.15.0-1. [ ] 40/55 Installing : kernel-headers-4.15.0-1. [= ] 40/55 Installing : kernel-headers-4.15.0-1. [== ] 40/55 Installing : kernel-headers-4.15.0-1. [=== ] 40/55 Installing : kernel-headers-4.15.0-1. [==== ] 40/55 Installing : kernel-headers-4.15.0-1. [===== ] 40/55 Installing : kernel-headers-4.15.0-1. [====== ] 40/55 Installing : kernel-headers-4.15.0-1. [======= ] 40/55 Installing : kernel-headers-4.15.0-1. [======== ] 40/55 Installing : kernel-headers-4.15.0-1. [========= ] 40/55 Installing : kernel-headers-4.15.0-1. [========== ] 40/55 Installing : kernel-headers-4.15.0-1. [=========== ] 40/55 Installing : kernel-headers-4.15.0-1. [============ ] 40/55 Installing : kernel-headers-4.15.0-1. [============= ] 40/55 Installing : kernel-headers-4.15.0-1. [============== ] 40/55 Installing : kernel-headers-4.15.0-1. [=============== ] 40/55 Installing : kernel-headers-4.15.0-1. [================ ] 40/55 Installing : kernel-headers-4.15.0-1. [================= ] 40/55 Installing : kernel-headers-4.15.0-1. [================== ] 40/55 Installing : kernel-headers-4.15.0-1. [=================== ] 40/55 Installing : kernel-headers-4.15.0-1. [==================== ] 40/55 Installing : kernel-headers-4.15.0-1. [===================== ] 40/55 Installing : kernel-headers-4.15.0-1. [====================== ] 40/55 Installing : kernel-headers-4.15.0-1. [======================= ] 40/55 Installing : kernel-headers-4.15.0-1. [======================== ] 40/55 Installing : kernel-headers-4.15.0-1.fc27.noarch 40/55 Installing : libpkgconf-1.4.1-1.fc27. [ ] 41/55 Installing : libpkgconf-1.4.1-1.fc27. [=== ] 41/55 Installing : libpkgconf-1.4.1-1.fc27. [======= ] 41/55 Installing : libpkgconf-1.4.1-1.fc27. [=========== ] 41/55 Installing : libpkgconf-1.4.1-1.fc27. [============== ] 41/55 Installing : libpkgconf-1.4.1-1.fc27. [================== ] 41/55 Installing : libpkgconf-1.4.1-1.fc27. [====================== ] 41/55 Installing : libpkgconf-1.4.1-1.fc27. [======================== ] 41/55 Installing : libpkgconf-1.4.1-1.fc27.riscv64 41/55 Running scriptlet: libpkgconf-1.4.1-1.fc27.riscv64 41/55 Installing : pkgconf-1.4.1-1.fc27.ris [ ] 42/55 Installing : pkgconf-1.4.1-1.fc27.ris [============= ] 42/55 Installing : pkgconf-1.4.1-1.fc27.ris [=============== ] 42/55 Installing : pkgconf-1.4.1-1.fc27.ris [==================== ] 42/55 Installing : pkgconf-1.4.1-1.fc27.ris [====================== ] 42/55 Installing : pkgconf-1.4.1-1.fc27.ris [======================== ] 42/55 Installing : pkgconf-1.4.1-1.fc27.riscv64 42/55 Installing : pkgconf-m4-1.4.1-1.fc27. [ ] 43/55 Installing : pkgconf-m4-1.4.1-1.fc27. [===================== ] 43/55 Installing : pkgconf-m4-1.4.1-1.fc27. [======================== ] 43/55 Installing : pkgconf-m4-1.4.1-1.fc27.noarch 43/55 Installing : pkgconf-pkg-config-1.4.1 [ ] 44/55 Installing : pkgconf-pkg-config-1.4.1 [==== ] 44/55 Installing : pkgconf-pkg-config-1.4.1 [===== ] 44/55 Installing : pkgconf-pkg-config-1.4.1 [======================= ] 44/55 Installing : pkgconf-pkg-config-1.4.1 [======================== ] 44/55 Installing : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 44/55 Installing : ncurses-c++-libs-6.1-2.2 [ ] 45/55 Installing : ncurses-c++-libs-6.1-2.2 [= ] 45/55 Installing : ncurses-c++-libs-6.1-2.2 [== ] 45/55 Installing : ncurses-c++-libs-6.1-2.2 [=== ] 45/55 Installing : ncurses-c++-libs-6.1-2.2 [==== ] 45/55 Installing : ncurses-c++-libs-6.1-2.2 [===== ] 45/55 Installing : ncurses-c++-libs-6.1-2.2 [====== ] 45/55 Installing : ncurses-c++-libs-6.1-2.2 [======= ] 45/55 Installing : ncurses-c++-libs-6.1-2.2 [======== ] 45/55 Installing : ncurses-c++-libs-6.1-2.2 [========= ] 45/55 Installing : ncurses-c++-libs-6.1-2.2 [========== ] 45/55 Installing : ncurses-c++-libs-6.1-2.2 [=========== ] 45/55 Installing : ncurses-c++-libs-6.1-2.2 [============ ] 45/55 Installing : ncurses-c++-libs-6.1-2.2 [============= ] 45/55 Installing : ncurses-c++-libs-6.1-2.2 [============== ] 45/55 Installing : ncurses-c++-libs-6.1-2.2 [=============== ] 45/55 Installing : ncurses-c++-libs-6.1-2.2 [================ ] 45/55 Installing : ncurses-c++-libs-6.1-2.2 [================= ] 45/55 Installing : ncurses-c++-libs-6.1-2.2 [================== ] 45/55 Installing : ncurses-c++-libs-6.1-2.2 [=================== ] 45/55 Installing : ncurses-c++-libs-6.1-2.2 [==================== ] 45/55 Installing : ncurses-c++-libs-6.1-2.2 [===================== ] 45/55 Installing : ncurses-c++-libs-6.1-2.2 [====================== ] 45/55 Installing : ncurses-c++-libs-6.1-2.2 [======================= ] 45/55 Installing : ncurses-c++-libs-6.1-2.2 [======================== ] 45/55 Installing : ncurses-c++-libs-6.1-2.20180129.fc27.riscv64 45/55 Installing : tar-2:1.29-7.fc27.riscv6 [ ] 46/55 Installing : tar-2:1.29-7.fc27.riscv6 [= ] 46/55 Installing : tar-2:1.29-7.fc27.riscv6 [== ] 46/55 Installing : tar-2:1.29-7.fc27.riscv6 [=== ] 46/55 Installing : tar-2:1.29-7.fc27.riscv6 [==== ] 46/55 Installing : tar-2:1.29-7.fc27.riscv6 [===== ] 46/55 Installing : tar-2:1.29-7.fc27.riscv6 [====== ] 46/55 Installing : tar-2:1.29-7.fc27.riscv6 [======= ] 46/55 Installing : tar-2:1.29-7.fc27.riscv6 [======== ] 46/55 Installing : tar-2:1.29-7.fc27.riscv6 [========= ] 46/55 Installing : tar-2:1.29-7.fc27.riscv6 [========== ] 46/55 Installing : tar-2:1.29-7.fc27.riscv6 [=========== ] 46/55 Installing : tar-2:1.29-7.fc27.riscv6 [============ ] 46/55 Installing : tar-2:1.29-7.fc27.riscv6 [============= ] 46/55 Installing : tar-2:1.29-7.fc27.riscv6 [============== ] 46/55 Installing : tar-2:1.29-7.fc27.riscv6 [=============== ] 46/55 Installing : tar-2:1.29-7.fc27.riscv6 [================ ] 46/55 Installing : tar-2:1.29-7.fc27.riscv6 [================= ] 46/55 Installing : tar-2:1.29-7.fc27.riscv6 [================== ] 46/55 Installing : tar-2:1.29-7.fc27.riscv6 [=================== ] 46/55 Installing : tar-2:1.29-7.fc27.riscv6 [==================== ] 46/55 Installing : tar-2:1.29-7.fc27.riscv6 [===================== ] 46/55 Installing : tar-2:1.29-7.fc27.riscv6 [====================== ] 46/55 Installing : tar-2:1.29-7.fc27.riscv6 [======================= ] 46/55 Installing : tar-2:1.29-7.fc27.riscv6 [======================== ] 46/55 Installing : tar-2:1.29-7.fc27.riscv64 46/55 Running scriptlet: tar-2:1.29-7.fc27.riscv64 46/55 Installing : emacs-filesystem-1:25.3- [ ] 47/55 Installing : emacs-filesystem-1:25.3- [===== ] 47/55 Installing : emacs-filesystem-1:25.3- [============ ] 47/55 Installing : emacs-filesystem-1:25.3- [=================== ] 47/55 Installing : emacs-filesystem-1:25.3-5.fc28.noarch 47/55 Installing : autoconf-2.69-26.fc28.no [ ] 48/55 Installing : autoconf-2.69-26.fc28.no [= ] 48/55 Installing : autoconf-2.69-26.fc28.no [== ] 48/55 Installing : autoconf-2.69-26.fc28.no [=== ] 48/55 Installing : autoconf-2.69-26.fc28.no [==== ] 48/55 Installing : autoconf-2.69-26.fc28.no [===== ] 48/55 Installing : autoconf-2.69-26.fc28.no [====== ] 48/55 Installing : autoconf-2.69-26.fc28.no [======= ] 48/55 Installing : autoconf-2.69-26.fc28.no [======== ] 48/55 Installing : autoconf-2.69-26.fc28.no [========= ] 48/55 Installing : autoconf-2.69-26.fc28.no [========== ] 48/55 Installing : autoconf-2.69-26.fc28.no [=========== ] 48/55 Installing : autoconf-2.69-26.fc28.no [============ ] 48/55 Installing : autoconf-2.69-26.fc28.no [============= ] 48/55 Installing : autoconf-2.69-26.fc28.no [============== ] 48/55 Installing : autoconf-2.69-26.fc28.no [=============== ] 48/55 Installing : autoconf-2.69-26.fc28.no [================ ] 48/55 Installing : autoconf-2.69-26.fc28.no [================= ] 48/55 Installing : autoconf-2.69-26.fc28.no [================== ] 48/55 Installing : autoconf-2.69-26.fc28.no [=================== ] 48/55 Installing : autoconf-2.69-26.fc28.no [==================== ] 48/55 Installing : autoconf-2.69-26.fc28.no [===================== ] 48/55 Installing : autoconf-2.69-26.fc28.no [====================== ] 48/55 Installing : autoconf-2.69-26.fc28.no [======================= ] 48/55 Installing : autoconf-2.69-26.fc28.no [======================== ] 48/55 Installing : autoconf-2.69-26.fc28.noarch 48/55 Running scriptlet: autoconf-2.69-26.fc28.noarch 48/55 Installing : automake-1.15.1-3.fc28.n [ ] 49/55 Installing : automake-1.15.1-3.fc28.n [= ] 49/55 Installing : automake-1.15.1-3.fc28.n [== ] 49/55 Installing : automake-1.15.1-3.fc28.n [=== ] 49/55 Installing : automake-1.15.1-3.fc28.n [==== ] 49/55 Installing : automake-1.15.1-3.fc28.n [===== ] 49/55 Installing : automake-1.15.1-3.fc28.n [====== ] 49/55 Installing : automake-1.15.1-3.fc28.n [======= ] 49/55 Installing : automake-1.15.1-3.fc28.n [======== ] 49/55 Installing : automake-1.15.1-3.fc28.n [========= ] 49/55 Installing : automake-1.15.1-3.fc28.n [========== ] 49/55 Installing : automake-1.15.1-3.fc28.n [=========== ] 49/55 Installing : automake-1.15.1-3.fc28.n [============ ] 49/55 Installing : automake-1.15.1-3.fc28.n [============= ] 49/55 Installing : automake-1.15.1-3.fc28.n [============== ] 49/55 Installing : automake-1.15.1-3.fc28.n [=============== ] 49/55 Installing : automake-1.15.1-3.fc28.n [================ ] 49/55 Installing : automake-1.15.1-3.fc28.n [================= ] 49/55 Installing : automake-1.15.1-3.fc28.n [================== ] 49/55 Installing : automake-1.15.1-3.fc28.n [=================== ] 49/55 Installing : automake-1.15.1-3.fc28.n [==================== ] 49/55 Installing : automake-1.15.1-3.fc28.n [===================== ] 49/55 Installing : automake-1.15.1-3.fc28.n [====================== ] 49/55 Installing : automake-1.15.1-3.fc28.n [======================= ] 49/55 Installing : automake-1.15.1-3.fc28.n [======================== ] 49/55 Installing : automake-1.15.1-3.fc28.noarch 49/55 Running scriptlet: automake-1.15.1-3.fc28.noarch 49/55 Installing : libtool-2.4.6-21.fc27.ri [ ] 50/55 Installing : libtool-2.4.6-21.fc27.ri [= ] 50/55 Installing : libtool-2.4.6-21.fc27.ri [== ] 50/55 Installing : libtool-2.4.6-21.fc27.ri [=== ] 50/55 Installing : libtool-2.4.6-21.fc27.ri [==== ] 50/55 Installing : libtool-2.4.6-21.fc27.ri [===== ] 50/55 Installing : libtool-2.4.6-21.fc27.ri [====== ] 50/55 Installing : libtool-2.4.6-21.fc27.ri [======= ] 50/55 Installing : libtool-2.4.6-21.fc27.ri [======== ] 50/55 Installing : libtool-2.4.6-21.fc27.ri [========= ] 50/55 Installing : libtool-2.4.6-21.fc27.ri [========== ] 50/55 Installing : libtool-2.4.6-21.fc27.ri [=========== ] 50/55 Installing : libtool-2.4.6-21.fc27.ri [============ ] 50/55 Installing : libtool-2.4.6-21.fc27.ri [============= ] 50/55 Installing : libtool-2.4.6-21.fc27.ri [============== ] 50/55 Installing : libtool-2.4.6-21.fc27.ri [=============== ] 50/55 Installing : libtool-2.4.6-21.fc27.ri [================ ] 50/55 Installing : libtool-2.4.6-21.fc27.ri [================= ] 50/55 Installing : libtool-2.4.6-21.fc27.ri [================== ] 50/55 Installing : libtool-2.4.6-21.fc27.ri [=================== ] 50/55 Installing : libtool-2.4.6-21.fc27.ri [==================== ] 50/55 Installing : libtool-2.4.6-21.fc27.ri [===================== ] 50/55 Installing : libtool-2.4.6-21.fc27.ri [====================== ] 50/55 Installing : libtool-2.4.6-21.fc27.ri [======================= ] 50/55 Installing : libtool-2.4.6-21.fc27.ri [======================== ] 50/55 Installing : libtool-2.4.6-21.fc27.riscv64 50/55 Running scriptlet: libtool-2.4.6-21.fc27.riscv64 50/55 Installing : ncurses-devel-6.1-2.2018 [ ] 51/55 Installing : ncurses-devel-6.1-2.2018 [= ] 51/55 Installing : ncurses-devel-6.1-2.2018 [== ] 51/55 Installing : ncurses-devel-6.1-2.2018 [=== ] 51/55 Installing : ncurses-devel-6.1-2.2018 [==== ] 51/55 Installing : ncurses-devel-6.1-2.2018 [===== ] 51/55 Installing : ncurses-devel-6.1-2.2018 [====== ] 51/55 Installing : ncurses-devel-6.1-2.2018 [======= ] 51/55 Installing : ncurses-devel-6.1-2.2018 [======== ] 51/55 Installing : ncurses-devel-6.1-2.2018 [========= ] 51/55 Installing : ncurses-devel-6.1-2.2018 [========== ] 51/55 Installing : ncurses-devel-6.1-2.2018 [=========== ] 51/55 Installing : ncurses-devel-6.1-2.2018 [============ ] 51/55 Installing : ncurses-devel-6.1-2.2018 [============= ] 51/55 Installing : ncurses-devel-6.1-2.2018 [============== ] 51/55 Installing : ncurses-devel-6.1-2.2018 [=============== ] 51/55 Installing : ncurses-devel-6.1-2.2018 [================ ] 51/55 Installing : ncurses-devel-6.1-2.2018 [================= ] 51/55 Installing : ncurses-devel-6.1-2.2018 [================== ] 51/55 Installing : ncurses-devel-6.1-2.2018 [=================== ] 51/55 Installing : ncurses-devel-6.1-2.2018 [==================== ] 51/55 Installing : ncurses-devel-6.1-2.2018 [===================== ] 51/55 Installing : ncurses-devel-6.1-2.2018 [====================== ] 51/55 Installing : ncurses-devel-6.1-2.2018 [======================= ] 51/55 Installing : ncurses-devel-6.1-2.2018 [======================== ] 51/55 Installing : ncurses-devel-6.1-2.20180129.fc27.riscv64 51/55 Installing : libcap-ng-devel-0.7.8-1. [ ] 52/55 Installing : libcap-ng-devel-0.7.8-1. [==== ] 52/55 Installing : libcap-ng-devel-0.7.8-1. [===== ] 52/55 Installing : libcap-ng-devel-0.7.8-1. [======= ] 52/55 Installing : libcap-ng-devel-0.7.8-1. [======== ] 52/55 Installing : libcap-ng-devel-0.7.8-1. [========= ] 52/55 Installing : libcap-ng-devel-0.7.8-1. [========== ] 52/55 Installing : libcap-ng-devel-0.7.8-1. [=========== ] 52/55 Installing : libcap-ng-devel-0.7.8-1. [============ ] 52/55 Installing : libcap-ng-devel-0.7.8-1. [============= ] 52/55 Installing : libcap-ng-devel-0.7.8-1. [============== ] 52/55 Installing : libcap-ng-devel-0.7.8-1. [=============== ] 52/55 Installing : libcap-ng-devel-0.7.8-1. [================ ] 52/55 Installing : libcap-ng-devel-0.7.8-1. [================= ] 52/55 Installing : libcap-ng-devel-0.7.8-1. [================== ] 52/55 Installing : libcap-ng-devel-0.7.8-1. [=================== ] 52/55 Installing : libcap-ng-devel-0.7.8-1. [==================== ] 52/55 Installing : libcap-ng-devel-0.7.8-1. [===================== ] 52/55 Installing : libcap-ng-devel-0.7.8-1. [====================== ] 52/55 Installing : libcap-ng-devel-0.7.8-1. [======================= ] 52/55 Installing : libcap-ng-devel-0.7.8-1. [======================== ] 52/55 Installing : libcap-ng-devel-0.7.8-1.fc27.riscv64 52/55 Installing : perl-File-ShareDir-1.104 [ ] 53/55 Installing : perl-File-ShareDir-1.104 [= ] 53/55 Installing : perl-File-ShareDir-1.104 [==== ] 53/55 Installing : perl-File-ShareDir-1.104 [===== ] 53/55 Installing : perl-File-ShareDir-1.104 [============== ] 53/55 Installing : perl-File-ShareDir-1.104 [================ ] 53/55 Installing : perl-File-ShareDir-1.104 [======================= ] 53/55 Installing : perl-File-ShareDir-1.104 [======================== ] 53/55 Installing : perl-File-ShareDir-1.104-2.fc27.noarch 53/55 Installing : texinfo-6.5-1.fc28.riscv [ ] 54/55 Installing : texinfo-6.5-1.fc28.riscv [= ] 54/55 Installing : texinfo-6.5-1.fc28.riscv [== ] 54/55 Installing : texinfo-6.5-1.fc28.riscv [=== ] 54/55 Installing : texinfo-6.5-1.fc28.riscv [==== ] 54/55 Installing : texinfo-6.5-1.fc28.riscv [===== ] 54/55 Installing : texinfo-6.5-1.fc28.riscv [====== ] 54/55 Installing : texinfo-6.5-1.fc28.riscv [======= ] 54/55 Installing : texinfo-6.5-1.fc28.riscv [======== ] 54/55 Installing : texinfo-6.5-1.fc28.riscv [========= ] 54/55 Installing : texinfo-6.5-1.fc28.riscv [========== ] 54/55 Installing : texinfo-6.5-1.fc28.riscv [=========== ] 54/55 Installing : texinfo-6.5-1.fc28.riscv [============ ] 54/55 Installing : texinfo-6.5-1.fc28.riscv [============= ] 54/55 Installing : texinfo-6.5-1.fc28.riscv [============== ] 54/55 Installing : texinfo-6.5-1.fc28.riscv [=============== ] 54/55 Installing : texinfo-6.5-1.fc28.riscv [================ ] 54/55 Installing : texinfo-6.5-1.fc28.riscv [================= ] 54/55 Installing : texinfo-6.5-1.fc28.riscv [================== ] 54/55 Installing : texinfo-6.5-1.fc28.riscv [=================== ] 54/55 Installing : texinfo-6.5-1.fc28.riscv [==================== ] 54/55 Installing : texinfo-6.5-1.fc28.riscv [===================== ] 54/55 Installing : texinfo-6.5-1.fc28.riscv [====================== ] 54/55 Installing : texinfo-6.5-1.fc28.riscv [======================= ] 54/55 Installing : texinfo-6.5-1.fc28.riscv [======================== ] 54/55 Installing : texinfo-6.5-1.fc28.riscv64 54/55 Running scriptlet: texinfo-6.5-1.fc28.riscv64 54/55 Installing : bison-3.0.4-8.fc28.riscv [ ] 55/55 Installing : bison-3.0.4-8.fc28.riscv [= ] 55/55 Installing : bison-3.0.4-8.fc28.riscv [== ] 55/55 Installing : bison-3.0.4-8.fc28.riscv [=== ] 55/55 Installing : bison-3.0.4-8.fc28.riscv [==== ] 55/55 Installing : bison-3.0.4-8.fc28.riscv [===== ] 55/55 Installing : bison-3.0.4-8.fc28.riscv [====== ] 55/55 Installing : bison-3.0.4-8.fc28.riscv [======= ] 55/55 Installing : bison-3.0.4-8.fc28.riscv [======== ] 55/55 Installing : bison-3.0.4-8.fc28.riscv [========= ] 55/55 Installing : bison-3.0.4-8.fc28.riscv [========== ] 55/55 Installing : bison-3.0.4-8.fc28.riscv [=========== ] 55/55 Installing : bison-3.0.4-8.fc28.riscv [============ ] 55/55 Installing : bison-3.0.4-8.fc28.riscv [============= ] 55/55 Installing : bison-3.0.4-8.fc28.riscv [============== ] 55/55 Installing : bison-3.0.4-8.fc28.riscv [=============== ] 55/55 Installing : bison-3.0.4-8.fc28.riscv [================ ] 55/55 Installing : bison-3.0.4-8.fc28.riscv [================= ] 55/55 Installing : bison-3.0.4-8.fc28.riscv [================== ] 55/55 Installing : bison-3.0.4-8.fc28.riscv [=================== ] 55/55 Installing : bison-3.0.4-8.fc28.riscv [==================== ] 55/55 Installing : bison-3.0.4-8.fc28.riscv [===================== ] 55/55 Installing : bison-3.0.4-8.fc28.riscv [====================== ] 55/55 Installing : bison-3.0.4-8.fc28.riscv [======================= ] 55/55 Installing : bison-3.0.4-8.fc28.riscv [======================== ] 55/55 Installing : bison-3.0.4-8.fc28.riscv64 55/55 Running scriptlet: bison-3.0.4-8.fc28.riscv64 55/55 Verifying : libcap-ng-devel-0.7.8-1.fc27.riscv64 1/55 Verifying : autoconf-2.69-26.fc28.noarch 2/55 Verifying : emacs-filesystem-1:25.3-5.fc28.noarch 3/55 Verifying : automake-1.15.1-3.fc28.noarch 4/55 Verifying : bison-3.0.4-8.fc28.riscv64 5/55 Verifying : libtool-2.4.6-21.fc27.riscv64 6/55 Verifying : tar-2:1.29-7.fc27.riscv64 7/55 Verifying : ncurses-devel-6.1-2.20180129.fc27.riscv64 8/55 Verifying : ncurses-c++-libs-6.1-2.20180129.fc27.riscv64 9/55 Verifying : texinfo-6.5-1.fc28.riscv64 10/55 Verifying : perl-Text-Unidecode-1.30-4.fc27.noarch 11/55 Verifying : perl-Unicode-EastAsianWidth-1.33-11.fc27.noarch 12/55 Verifying : perl-libintl-perl-1.27-1.fc27.riscv64 13/55 Verifying : perl-Carp-1.42-408.fc27.0.riscv64.noarch 14/55 Verifying : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 15/55 Verifying : perl-Getopt-Long-1:2.50-3.fc27.noarch 16/55 Verifying : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 17/55 Verifying : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv64 18/55 Verifying : perl-Encode-4:2.94-16.fc27.riscv64 19/55 Verifying : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 20/55 Verifying : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 21/55 Verifying : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 22/55 Verifying : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 23/55 Verifying : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 24/55 Verifying : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 25/55 Verifying : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 26/55 Verifying : perl-constant-1.33-408.fc27.0.riscv64.noarch 27/55 Verifying : perl-IO-1.38-408.fc28.1.riscv64.riscv64 28/55 Verifying : perl-File-Path-2.15-1.fc27.noarch 29/55 Verifying : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 30/55 Verifying : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 31/55 Verifying : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 32/55 Verifying : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 33/55 Verifying : perl-threads-1:2.21-1.fc27.riscv64 34/55 Verifying : perl-threads-shared-1.58-1.fc27.riscv64 35/55 Verifying : perl-Socket-4:2.027-1.fc27.riscv64 36/55 Verifying : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 37/55 Verifying : pkgconf-m4-1.4.1-1.fc27.noarch 38/55 Verifying : pkgconf-1.4.1-1.fc27.riscv64 39/55 Verifying : libpkgconf-1.4.1-1.fc27.riscv64 40/55 Verifying : kernel-headers-4.15.0-1.fc27.noarch 41/55 Verifying : m4-1.4.18-5.fc28.riscv64 42/55 Verifying : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarch 43/55 Verifying : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 44/55 Verifying : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noarc 45/55 Verifying : perl-Thread-Queue-3.12-408.fc27.0.riscv64.noarch 46/55 Verifying : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 47/55 Verifying : perl-podlators-4.09-408.fc27.0.riscv64.noarch 48/55 Verifying : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noarch 49/55 Verifying : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 50/55 Verifying : perl-Time-Local-1:1.250-394.fc27.noarch 51/55 Verifying : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noarch 52/55 Verifying : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 53/55 Verifying : perl-File-ShareDir-1.104-2.fc27.noarch 54/55 Verifying : perl-Class-Inspector-1.32-1.fc27.noarch 55/55 Installed: autoconf.noarch 2.69-26.fc28 automake.noarch 1.15.1-3.fc28 bison.riscv64 3.0.4-8.fc28 libcap-ng-devel.riscv64 0.7.8-1.fc27 libtool.riscv64 2.4.6-21.fc27 ncurses-devel.riscv64 6.1-2.20180129.fc27 texinfo.riscv64 6.5-1.fc28 perl-File-ShareDir.noarch 1.104-2.fc27 emacs-filesystem.noarch 1:25.3-5.fc28 kernel-headers.noarch 4.15.0-1.fc27 libpkgconf.riscv64 1.4.1-1.fc27 m4.riscv64 1.4.18-5.fc28 ncurses-c++-libs.riscv64 6.1-2.20180129.fc27 perl-Carp.noarch 1.42-408.fc27.0.riscv64 perl-Class-Inspector.noarch 1.32-1.fc27 perl-Data-Dumper.riscv64 2.167-408.fc27.0.riscv64 perl-Encode.riscv64 4:2.94-16.fc27 perl-Errno.riscv64 1.28-408.fc28.1.riscv64 perl-Exporter.noarch 5.72-408.fc27.0.riscv64 perl-File-Path.noarch 2.15-1.fc27 perl-File-Temp.noarch 0.230.400-408.fc27.0.riscv64 perl-Getopt-Long.noarch 1:2.50-3.fc27 perl-HTTP-Tiny.noarch 0.070-408.fc27.0.riscv64 perl-IO.riscv64 1.38-408.fc28.1.riscv64 perl-MIME-Base64.riscv64 3.15-408.fc27.0.riscv64 perl-PathTools.riscv64 3.67-408.fc27.0.riscv64 perl-Pod-Escapes.noarch 1:1.07-408.fc27.0.riscv64 perl-Pod-Perldoc.noarch 3.28-408.fc27.0.riscv64 perl-Pod-Simple.noarch 1:3.35-408.fc27.0.riscv64 perl-Pod-Usage.noarch 4:1.69-408.fc27.0.riscv64 perl-Scalar-List-Utils.riscv64 3:1.48-1.fc27 perl-Socket.riscv64 4:2.027-1.fc27 perl-Storable.riscv64 1:2.62-408.fc27.0.riscv64 perl-Term-ANSIColor.noarch 4.06-408.fc27.0.riscv64 perl-Term-Cap.noarch 1.17-408.fc27.0.riscv64 perl-Text-ParseWords.noarch 3.30-408.fc27.0.riscv64 perl-Text-Tabs+Wrap.noarch 2013.0523-408.fc27.0.riscv64 perl-Text-Unidecode.noarch 1.30-4.fc27 perl-Thread-Queue.noarch 3.12-408.fc27.0.riscv64 perl-Time-Local.noarch 1:1.250-394.fc27 perl-Unicode-EastAsianWidth.noarch 1.33-11.fc27 perl-Unicode-Normalize.riscv64 1.25-408.fc27.0.riscv64 perl-constant.noarch 1.33-408.fc27.0.riscv64 perl-interpreter.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-libintl-perl.riscv64 1.27-1.fc27 perl-libs.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-macros.riscv64 4:5.26.1-408.fc28.1.riscv64 perl-parent.noarch 1:0.236-408.fc27.0.riscv64 perl-podlators.noarch 4.09-408.fc27.0.riscv64 perl-threads.riscv64 1:2.21-1.fc27 perl-threads-shared.riscv64 1.58-1.fc27 pkgconf.riscv64 1.4.1-1.fc27 pkgconf-m4.noarch 1.4.1-1.fc27 pkgconf-pkg-config.riscv64 1.4.1-1.fc27 tar.riscv64 2:1.29-7.fc27 Complete! + dnf -y update --best Local RPMS 0% [ ] --- B/s | 0 B --:-- ETA Local RPMS 6% [= ] 2.9 MB/s | 895 kB 00:04 ETA Local RPMS 12% [== ] 2.9 MB/s | 1.7 MB 00:04 ETA Local RPMS 19% [===- ] 2.9 MB/s | 2.7 MB 00:03 ETA Local RPMS 26% [===== ] 3.0 MB/s | 3.7 MB 00:03 ETA Local RPMS 33% [======- ] 3.0 MB/s | 4.7 MB 00:03 ETA Local RPMS 40% [======== ] 3.0 MB/s | 5.7 MB 00:02 ETA Local RPMS 48% [=========- ] 3.0 MB/s | 6.7 MB 00:02 ETA Local RPMS 55% [=========== ] 2.8 MB/s | 7.7 MB 00:02 ETA Local RPMS 62% [============ ] 2.8 MB/s | 8.7 MB 00:01 ETA Local RPMS 69% [=============- ] 2.8 MB/s | 9.7 MB 00:01 ETA Local RPMS 76% [=============== ] 2.9 MB/s | 11 MB 00:01 ETA Local RPMS 83% [================- ] 2.9 MB/s | 12 MB 00:00 ETA Local RPMS 89% [=================- ] 2.9 MB/s | 12 MB 00:00 ETA Local RPMS 95% [=================== ] 2.9 MB/s | 13 MB 00:00 ETA Local RPMS 2.4 MB/s | 14 MB 00:05 Last metadata expiration check: 0:01:42 ago on Thu Feb 22 15:46:14 2018. Dependencies resolved. Nothing to do. Complete! + dnf -y group install buildsys-build Last metadata expiration check: 0:02:14 ago on Thu Feb 22 15:46:14 2018. No match for group package "gcc-c++" No match for group package "gcc" Dependencies resolved. ================================================================================ Group Packages ================================================================================ Marking packages as installed by the group: @Buildsystem building group rpm-build gzip patch tar which findutils diffutils xz sed info util-linux make unzip grep shadow-utils bash cpio coreutils bzip2 fedora-release gawk redhat-rpm-config ================================================================================ Package Arch Version Repository Size ================================================================================ Installing group packages: bzip2 riscv64 1.0.6-24.fc28 local 81 k diffutils riscv64 3.6-3.fc28 local 577 k make riscv64 1:4.2.1-6.fc27 local 486 k patch riscv64 2.7.5-6.fc27 local 270 k redhat-rpm-config noarch 96-1.fc28.0.riscv64 local 75 k rpm-build riscv64 4.14.1-6.fc28.1 local 235 k unzip riscv64 6.0-36.fc28 local 398 k which riscv64 2.21-4.fc28 local 65 k xz riscv64 5.2.3-5.fc28 local 212 k Installing dependencies: binutils riscv64 2.30-1.fc28 local 6.9 M dwz riscv64 0.12-5.fc28 local 108 k elfutils riscv64 0.170-4.fc28 local 791 k file riscv64 5.32-3.fc28 local 81 k fpc-srpm-macros noarch 1.1-4.fc28 local 7.5 k ghc-srpm-macros noarch 1.4.2-7.fc28 local 8.2 k gnat-srpm-macros noarch 4-5.fc28 local 8.8 k go-srpm-macros noarch 2-11.fc28 local 8.4 k nim-srpm-macros noarch 1-1.fc28 local 7.6 k ocaml-srpm-macros noarch 5-2.fc27 local 7.8 k openblas-srpm-macros noarch 2-2.fc27 local 6.6 k perl-srpm-macros noarch 1-26.fc28 local 9.7 k python-srpm-macros noarch 3-26.fc28 local 10 k qt5-srpm-macros noarch 5.10.0-1.fc28 local 9.0 k rust-srpm-macros noarch 5-1.fc28 local 8.0 k zip riscv64 3.0-20.fc28 local 271 k zstd riscv64 1.3.3-1.fc27 local 1.1 M Transaction Summary ================================================================================ Install 26 Packages Total download size: 12 M Installed size: 48 M Downloading Packages: (1/26): diffutils-3. 0% [ ] --- B/s | 0 B --:-- ETA (1/26): redhat-rpm-config-96-1.fc28.0.riscv64.n 844 kB/s | 75 kB 00:00 (2-3/26): diffutils- 1% [ ] 1.8 MB/s | 235 kB 00:06 ETA (2/26): nim-srpm-macros-1-1.fc28.noarch.rpm 308 kB/s | 7.6 kB 00:00 (3-4/26): diffutils- 2% [ ] 1.7 MB/s | 274 kB 00:06 ETA (3/26): ocaml-srpm-macros-5-2.fc27.noarch.rpm 330 kB/s | 7.8 kB 00:00 (4-5/26): make-4.2.1 2% [- ] 1.7 MB/s | 314 kB 00:06 ETA (4/26): openblas-srpm-macros-2-2.fc27.noarch.rp 286 kB/s | 6.6 kB 00:00 (5-6/26): make-4.2.1 2% [- ] 1.7 MB/s | 353 kB 00:06 ETA (5/26): qt5-srpm-macros-5.10.0-1.fc28.noarch.rp 364 kB/s | 9.0 kB 00:00 (6-7/26): make-4.2.1 3% [- ] 1.7 MB/s | 394 kB 00:06 ETA (6/26): rust-srpm-macros-5-1.fc28.noarch.rpm 333 kB/s | 8.0 kB 00:00 (7-8/26): make-4.2.1 3% [- ] 1.7 MB/s | 434 kB 00:06 ETA (7/26): rpm-build-4.14.1-6.fc28.1.riscv64.rpm 945 kB/s | 235 kB 00:00 (8-9/26): make-4.2.1 9% [=- ] 1.8 MB/s | 1.1 MB 00:06 ETA (8/26): make-4.2.1-6.fc27.riscv64.rpm 614 kB/s | 486 kB 00:00 (9-10/26): zstd-1.3. 11% [== ] 1.8 MB/s | 1.4 MB 00:05 ETA (9/26): which-2.21-4.fc28.riscv64.rpm 769 kB/s | 65 kB 00:00 (10-11/26): zstd-1.3 13% [==- ] 1.8 MB/s | 1.6 MB 00:05 ETA (10/26): diffutils-3.6-3.fc28.riscv64.rpm 554 kB/s | 577 kB 00:01 (11-12/26): patch-2. 14% [==- ] 1.7 MB/s | 1.6 MB 00:05 ETA (11/26): patch-2.7.5-6.fc27.riscv64.rpm 687 kB/s | 270 kB 00:00 (12-13/26): zstd-1.3 20% [==== ] 1.8 MB/s | 2.4 MB 00:05 ETA (12/26): unzip-6.0-36.fc28.riscv64.rpm 824 kB/s | 398 kB 00:00 (13-14/26): zstd-1.3 24% [====- ] 1.8 MB/s | 2.8 MB 00:04 ETA (13/26): xz-5.2.3-5.fc28.riscv64.rpm 690 kB/s | 212 kB 00:00 (14-15/26): zstd-1.3 25% [===== ] 1.8 MB/s | 3.0 MB 00:04 ETA (14/26): bzip2-1.0.6-24.fc28.riscv64.rpm 489 kB/s | 81 kB 00:00 (15-16/26): zstd-1.3 26% [===== ] 1.8 MB/s | 3.1 MB 00:04 ETA (15/26): file-5.32-3.fc28.riscv64.rpm 775 kB/s | 81 kB 00:00 (16-17/26): zstd-1.3 28% [=====- ] 1.8 MB/s | 3.3 MB 00:04 ETA (16-18/26): zstd-1.3 36% [======= ] 1.8 MB/s | 4.2 MB 00:04 ETA (16/26): zstd-1.3.3-1.fc27.riscv64.rpm 674 kB/s | 1.1 MB 00:01 (17-18/26): binutils 38% [=======- ] 1.8 MB/s | 4.4 MB 00:03 ETA (17/26): fpc-srpm-macros-1.1-4.fc28.noarch.rpm 321 kB/s | 7.5 kB 00:00 (18-19/26): binutils 38% [=======- ] 1.8 MB/s | 4.5 MB 00:03 ETA (18/26): ghc-srpm-macros-1.4.2-7.fc28.noarch.rp 346 kB/s | 8.2 kB 00:00 (19-20/26): binutils 38% [=======- ] 1.8 MB/s | 4.5 MB 00:03 ETA (19/26): gnat-srpm-macros-4-5.fc28.noarch.rpm 362 kB/s | 8.8 kB 00:00 (20-21/26): binutils 39% [=======- ] 1.8 MB/s | 4.6 MB 00:03 ETA (20/26): go-srpm-macros-2-11.fc28.noarch.rpm 337 kB/s | 8.4 kB 00:00 (21-22/26): binutils 39% [=======- ] 1.8 MB/s | 4.6 MB 00:03 ETA (21/26): perl-srpm-macros-1-26.fc28.noarch.rpm 340 kB/s | 9.7 kB 00:00 (22-23/26): binutils 39% [=======- ] 1.8 MB/s | 4.6 MB 00:03 ETA (22/26): python-srpm-macros-3-26.fc28.noarch.rp 419 kB/s | 10 kB 00:00 (23-24/26): binutils 40% [======== ] 1.8 MB/s | 4.7 MB 00:03 ETA (23/26): dwz-0.12-5.fc28.riscv64.rpm 888 kB/s | 108 kB 00:00 (24-25/26): binutils 42% [========- ] 1.8 MB/s | 5.0 MB 00:03 ETA (24/26): elfutils-0.170-4.fc28.riscv64.rpm 595 kB/s | 791 kB 00:01 (25-26/26): zip-3.0- 45% [========= ] 1.7 MB/s | 5.3 MB 00:03 ETA (25/26): zip-3.0-20.fc28.riscv64.rpm 807 kB/s | 271 kB 00:00 (26/26): binutils-2. 48% [=========- ] 1.8 MB/s | 5.6 MB 00:03 ETA (26/26): binutils-2. 55% [=========== ] 1.8 MB/s | 6.5 MB 00:02 ETA (26/26): binutils-2. 63% [============- ] 1.9 MB/s | 7.4 MB 00:02 ETA (26/26): binutils-2. 70% [============== ] 2.0 MB/s | 8.3 MB 00:01 ETA (26/26): binutils-2. 78% [===============- ] 2.0 MB/s | 9.2 MB 00:01 ETA (26/26): binutils-2. 85% [================= ] 2.1 MB/s | 10 MB 00:00 ETA (26/26): binutils-2. 93% [==================- ] 2.1 MB/s | 11 MB 00:00 ETA (26/26): binutils-2.30-1.fc28.riscv64.rpm 1.7 MB/s | 6.9 MB 00:04 -------------------------------------------------------------------------------- Total 1.8 MB/s | 12 MB 00:06 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [= ] 1/1 Preparing : [=== ] 1/1 Preparing : [===== ] 1/1 Preparing : [======= ] 1/1 Preparing : [========= ] 1/1 Preparing : [=========== ] 1/1 Preparing : [============= ] 1/1 Preparing : [=============== ] 1/1 Preparing : [================= ] 1/1 Preparing : [=================== ] 1/1 Preparing : [===================== ] 1/1 Preparing : [======================= ] 1/1 Preparing : [========================= ] 1/1 Preparing : [=========================== ] 1/1 Preparing : [============================= ] 1/1 Preparing : [=============================== ] 1/1 Preparing : [================================= ] 1/1 Preparing : [=================================== ] 1/1 Preparing : [===================================== ] 1/1 Preparing : [====================================== ] 1/1 Preparing : [======================================== ] 1/1 Preparing : [========================================== ] 1/1 Preparing : [============================================ ] 1/1 Preparing : [============================================== ] 1/1 Preparing : [================================================ ] 1/1 Preparing : 1/1 Installing : file-5.32-3.fc28.riscv64 [ ] 1/26 Installing : file-5.32-3.fc28.riscv64 [====== ] 1/26 Installing : file-5.32-3.fc28.riscv64 [=========== ] 1/26 Installing : file-5.32-3.fc28.riscv64 [================== ] 1/26 Installing : file-5.32-3.fc28.riscv64 [===================== ] 1/26 Installing : file-5.32-3.fc28.riscv64 [====================== ] 1/26 Installing : file-5.32-3.fc28.riscv64 [======================= ] 1/26 Installing : file-5.32-3.fc28.riscv64 [======================== ] 1/26 Installing : file-5.32-3.fc28.riscv64 1/26 Installing : unzip-6.0-36.fc28.riscv6 [ ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [= ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [=== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [==== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [===== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [====== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [======= ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [======== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [========= ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [========== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [=========== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [============ ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [============= ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [============== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [=============== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [================ ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [================= ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [================== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [=================== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [==================== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [===================== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [====================== ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [======================= ] 2/26 Installing : unzip-6.0-36.fc28.riscv6 [======================== ] 2/26 Installing : unzip-6.0-36.fc28.riscv64 2/26 Installing : zip-3.0-20.fc28.riscv64 [ ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [= ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [=== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [==== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [===== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [====== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [======= ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [======== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [========= ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [========== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [=========== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [============ ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [============= ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [============== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [=============== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [================ ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [================= ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [================== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [=================== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [==================== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [===================== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [====================== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [======================= ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [======================== ] 3/26 Installing : zip-3.0-20.fc28.riscv64 [========================= ] 3/26 Installing : zip-3.0-20.fc28.riscv64 3/26 Installing : dwz-0.12-5.fc28.riscv64 [ ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 [=== ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 [======= ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 [=========== ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 [=============== ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 [================== ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 [===================== ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 [========================= ] 4/26 Installing : dwz-0.12-5.fc28.riscv64 4/26 Installing : python-srpm-macros-3-26. [ ] 5/26 Installing : python-srpm-macros-3-26. [======================= ] 5/26 Installing : python-srpm-macros-3-26.fc28.noarch 5/26 Installing : perl-srpm-macros-1-26.fc [ ] 6/26 Installing : perl-srpm-macros-1-26.fc [====================== ] 6/26 Installing : perl-srpm-macros-1-26.fc28.noarch 6/26 Installing : go-srpm-macros-2-11.fc28 [ ] 7/26 Installing : go-srpm-macros-2-11.fc28 [====================== ] 7/26 Installing : go-srpm-macros-2-11.fc28.noarch 7/26 Installing : gnat-srpm-macros-4-5.fc2 [ ] 8/26 Installing : gnat-srpm-macros-4-5.fc2 [====================== ] 8/26 Installing : gnat-srpm-macros-4-5.fc28.noarch 8/26 Installing : ghc-srpm-macros-1.4.2-7. [ ] 9/26 Installing : ghc-srpm-macros-1.4.2-7. [==================== ] 9/26 Installing : ghc-srpm-macros-1.4.2-7.fc28.noarch 9/26 Installing : fpc-srpm-macros-1.1-4.fc [ ] 10/26 Installing : fpc-srpm-macros-1.1-4.fc [================= ] 10/26 Installing : fpc-srpm-macros-1.1-4.fc28.noarch 10/26 Installing : binutils-2.30-1.fc28.ris [ ] 11/26 Installing : binutils-2.30-1.fc28.ris [= ] 11/26 Installing : binutils-2.30-1.fc28.ris [== ] 11/26 Installing : binutils-2.30-1.fc28.ris [=== ] 11/26 Installing : binutils-2.30-1.fc28.ris [==== ] 11/26 Installing : binutils-2.30-1.fc28.ris [===== ] 11/26 Installing : binutils-2.30-1.fc28.ris [====== ] 11/26 Installing : binutils-2.30-1.fc28.ris [======= ] 11/26 Installing : binutils-2.30-1.fc28.ris [======== ] 11/26 Installing : binutils-2.30-1.fc28.ris [========= ] 11/26 Installing : binutils-2.30-1.fc28.ris [========== ] 11/26 Installing : binutils-2.30-1.fc28.ris [=========== ] 11/26 Installing : binutils-2.30-1.fc28.ris [============ ] 11/26 Installing : binutils-2.30-1.fc28.ris [============= ] 11/26 Installing : binutils-2.30-1.fc28.ris [============== ] 11/26 Installing : binutils-2.30-1.fc28.ris [=============== ] 11/26 Installing : binutils-2.30-1.fc28.ris [================ ] 11/26 Installing : binutils-2.30-1.fc28.ris [================= ] 11/26 Installing : binutils-2.30-1.fc28.ris [================== ] 11/26 Installing : binutils-2.30-1.fc28.ris [=================== ] 11/26 Installing : binutils-2.30-1.fc28.ris [==================== ] 11/26 Installing : binutils-2.30-1.fc28.ris [===================== ] 11/26 Installing : binutils-2.30-1.fc28.ris [====================== ] 11/26 Installing : binutils-2.30-1.fc28.ris [======================= ] 11/26 Installing : binutils-2.30-1.fc28.ris [======================== ] 11/26 Installing : binutils-2.30-1.fc28.riscv64 11/26 Running scriptlet: binutils-2.30-1.fc28.riscv64 11/26 Installing : elfutils-0.170-4.fc28.ri [ ] 12/26 Installing : elfutils-0.170-4.fc28.ri [= ] 12/26 Installing : elfutils-0.170-4.fc28.ri [== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [=== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [==== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [===== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [====== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [======= ] 12/26 Installing : elfutils-0.170-4.fc28.ri [======== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [========= ] 12/26 Installing : elfutils-0.170-4.fc28.ri [========== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [=========== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [============ ] 12/26 Installing : elfutils-0.170-4.fc28.ri [============= ] 12/26 Installing : elfutils-0.170-4.fc28.ri [============== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [=============== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [================ ] 12/26 Installing : elfutils-0.170-4.fc28.ri [================= ] 12/26 Installing : elfutils-0.170-4.fc28.ri [================== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [=================== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [==================== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [===================== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [====================== ] 12/26 Installing : elfutils-0.170-4.fc28.ri [======================= ] 12/26 Installing : elfutils-0.170-4.fc28.ri [======================== ] 12/26 Installing : elfutils-0.170-4.fc28.riscv64 12/26 Installing : bzip2-1.0.6-24.fc28.risc [ ] 13/26 Installing : bzip2-1.0.6-24.fc28.risc [===== ] 13/26 Installing : bzip2-1.0.6-24.fc28.risc [========== ] 13/26 Installing : bzip2-1.0.6-24.fc28.risc [============== ] 13/26 Installing : bzip2-1.0.6-24.fc28.risc [=================== ] 13/26 Installing : bzip2-1.0.6-24.fc28.risc [===================== ] 13/26 Installing : bzip2-1.0.6-24.fc28.risc [======================= ] 13/26 Installing : bzip2-1.0.6-24.fc28.risc [======================== ] 13/26 Installing : bzip2-1.0.6-24.fc28.riscv64 13/26 Installing : xz-5.2.3-5.fc28.riscv64 [ ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [= ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [=== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [===== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [====== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [======= ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [========= ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [========== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [=========== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [============ ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [============= ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [============== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [=============== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [================ ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [================== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [=================== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [==================== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [===================== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [====================== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [======================= ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [======================== ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 [========================= ] 14/26 Installing : xz-5.2.3-5.fc28.riscv64 14/26 Installing : patch-2.7.5-6.fc27.riscv [ ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [= ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [=== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [==== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [===== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [====== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [======= ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [======== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [========= ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [========== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [=========== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [============ ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [============= ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [============== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [=============== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [================ ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [================= ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [================== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [=================== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [==================== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [===================== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [====================== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [======================= ] 15/26 Installing : patch-2.7.5-6.fc27.riscv [======================== ] 15/26 Installing : patch-2.7.5-6.fc27.riscv64 15/26 Installing : zstd-1.3.3-1.fc27.riscv6 [ ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [= ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [=== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [==== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [===== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [====== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [======= ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [======== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [========= ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [========== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [=========== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [============ ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [============= ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [============== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [=============== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [================ ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [================= ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [================== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [=================== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [==================== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [===================== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [====================== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [======================= ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv6 [======================== ] 16/26 Installing : zstd-1.3.3-1.fc27.riscv64 16/26 Installing : rust-srpm-macros-5-1.fc2 [ ] 17/26 Installing : rust-srpm-macros-5-1.fc2 [=== ] 17/26 Installing : rust-srpm-macros-5-1.fc2 [===== ] 17/26 Installing : rust-srpm-macros-5-1.fc2 [======================= ] 17/26 Installing : rust-srpm-macros-5-1.fc28.noarch 17/26 Installing : qt5-srpm-macros-5.10.0-1 [ ] 18/26 Installing : qt5-srpm-macros-5.10.0-1 [==================== ] 18/26 Installing : qt5-srpm-macros-5.10.0-1.fc28.noarch 18/26 Installing : openblas-srpm-macros-2-2 [ ] 19/26 Installing : openblas-srpm-macros-2-2 [================ ] 19/26 Installing : openblas-srpm-macros-2-2.fc27.noarch 19/26 Installing : ocaml-srpm-macros-5-2.fc [ ] 20/26 Installing : ocaml-srpm-macros-5-2.fc [===================== ] 20/26 Installing : ocaml-srpm-macros-5-2.fc27.noarch 20/26 Installing : nim-srpm-macros-1-1.fc28 [ ] 21/26 Installing : nim-srpm-macros-1-1.fc28 [=== ] 21/26 Installing : nim-srpm-macros-1-1.fc28 [===== ] 21/26 Installing : nim-srpm-macros-1-1.fc28 [======================= ] 21/26 Installing : nim-srpm-macros-1-1.fc28.noarch 21/26 Installing : redhat-rpm-config-96-1.f [ ] 22/26 Installing : redhat-rpm-config-96-1.f [== ] 22/26 Installing : redhat-rpm-config-96-1.f [=== ] 22/26 Installing : redhat-rpm-config-96-1.f [========= ] 22/26 Installing : redhat-rpm-config-96-1.f [=========== ] 22/26 Installing : redhat-rpm-config-96-1.f [================= ] 22/26 Installing : redhat-rpm-config-96-1.f [================== ] 22/26 Installing : redhat-rpm-config-96-1.f [=================== ] 22/26 Installing : redhat-rpm-config-96-1.f [===================== ] 22/26 Installing : redhat-rpm-config-96-1.f [====================== ] 22/26 Installing : redhat-rpm-config-96-1.f [======================== ] 22/26 Installing : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 22/26 Installing : diffutils-3.6-3.fc28.ris [ ] 23/26 Installing : diffutils-3.6-3.fc28.ris [= ] 23/26 Installing : diffutils-3.6-3.fc28.ris [== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [=== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [==== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [===== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [====== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [======= ] 23/26 Installing : diffutils-3.6-3.fc28.ris [======== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [========= ] 23/26 Installing : diffutils-3.6-3.fc28.ris [========== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [=========== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [============ ] 23/26 Installing : diffutils-3.6-3.fc28.ris [============= ] 23/26 Installing : diffutils-3.6-3.fc28.ris [============== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [=============== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [================ ] 23/26 Installing : diffutils-3.6-3.fc28.ris [================= ] 23/26 Installing : diffutils-3.6-3.fc28.ris [================== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [=================== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [==================== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [===================== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [====================== ] 23/26 Installing : diffutils-3.6-3.fc28.ris [======================= ] 23/26 Installing : diffutils-3.6-3.fc28.ris [======================== ] 23/26 Installing : diffutils-3.6-3.fc28.riscv64 23/26 Running scriptlet: diffutils-3.6-3.fc28.riscv64 23/26 Installing : rpm-build-4.14.1-6.fc28. [ ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [= ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [=== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [==== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [===== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [====== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [======= ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [======== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [========= ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [=========== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [============ ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [============== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [=============== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [================ ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [================= ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [================== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [=================== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [==================== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [===================== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [====================== ] 24/26 Installing : rpm-build-4.14.1-6.fc28. [======================== ] 24/26 Installing : rpm-build-4.14.1-6.fc28.1.riscv64 24/26 Installing : which-2.21-4.fc28.riscv6 [ ] 25/26 Installing : which-2.21-4.fc28.riscv6 [===== ] 25/26 Installing : which-2.21-4.fc28.riscv6 [=========== ] 25/26 Installing : which-2.21-4.fc28.riscv6 [=============== ] 25/26 Installing : which-2.21-4.fc28.riscv6 [================ ] 25/26 Installing : which-2.21-4.fc28.riscv6 [================= ] 25/26 Installing : which-2.21-4.fc28.riscv6 [================== ] 25/26 Installing : which-2.21-4.fc28.riscv6 [======================== ] 25/26 Installing : which-2.21-4.fc28.riscv64 25/26 Running scriptlet: which-2.21-4.fc28.riscv64 25/26 Installing : make-1:4.2.1-6.fc27.risc [ ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [= ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [=== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [==== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [===== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [====== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [======= ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [======== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [========= ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [========== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [=========== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [============ ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [============= ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [============== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [=============== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [================ ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [================= ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [================== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [=================== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [==================== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [===================== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [====================== ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [======================= ] 26/26 Installing : make-1:4.2.1-6.fc27.risc [======================== ] 26/26 Installing : make-1:4.2.1-6.fc27.riscv64 26/26 Running scriptlet: make-1:4.2.1-6.fc27.riscv64 26/26 Verifying : diffutils-3.6-3.fc28.riscv64 1/26 Verifying : make-1:4.2.1-6.fc27.riscv64 2/26 Verifying : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 3/26 Verifying : nim-srpm-macros-1-1.fc28.noarch 4/26 Verifying : ocaml-srpm-macros-5-2.fc27.noarch 5/26 Verifying : openblas-srpm-macros-2-2.fc27.noarch 6/26 Verifying : qt5-srpm-macros-5.10.0-1.fc28.noarch 7/26 Verifying : rust-srpm-macros-5-1.fc28.noarch 8/26 Verifying : rpm-build-4.14.1-6.fc28.1.riscv64 9/26 Verifying : zstd-1.3.3-1.fc27.riscv64 10/26 Verifying : which-2.21-4.fc28.riscv64 11/26 Verifying : patch-2.7.5-6.fc27.riscv64 12/26 Verifying : unzip-6.0-36.fc28.riscv64 13/26 Verifying : xz-5.2.3-5.fc28.riscv64 14/26 Verifying : bzip2-1.0.6-24.fc28.riscv64 15/26 Verifying : elfutils-0.170-4.fc28.riscv64 16/26 Verifying : file-5.32-3.fc28.riscv64 17/26 Verifying : binutils-2.30-1.fc28.riscv64 18/26 Verifying : fpc-srpm-macros-1.1-4.fc28.noarch 19/26 Verifying : ghc-srpm-macros-1.4.2-7.fc28.noarch 20/26 Verifying : gnat-srpm-macros-4-5.fc28.noarch 21/26 Verifying : go-srpm-macros-2-11.fc28.noarch 22/26 Verifying : perl-srpm-macros-1-26.fc28.noarch 23/26 Verifying : python-srpm-macros-3-26.fc28.noarch 24/26 Verifying : dwz-0.12-5.fc28.riscv64 25/26 Verifying : zip-3.0-20.fc28.riscv64 26/26 Installed: bzip2.riscv64 1.0.6-24.fc28 diffutils.riscv64 3.6-3.fc28 make.riscv64 1:4.2.1-6.fc27 patch.riscv64 2.7.5-6.fc27 redhat-rpm-config.noarch 96-1.fc28.0.riscv64 rpm-build.riscv64 4.14.1-6.fc28.1 unzip.riscv64 6.0-36.fc28 which.riscv64 2.21-4.fc28 xz.riscv64 5.2.3-5.fc28 binutils.riscv64 2.30-1.fc28 dwz.riscv64 0.12-5.fc28 elfutils.riscv64 0.170-4.fc28 file.riscv64 5.32-3.fc28 fpc-srpm-macros.noarch 1.1-4.fc28 ghc-srpm-macros.noarch 1.4.2-7.fc28 gnat-srpm-macros.noarch 4-5.fc28 go-srpm-macros.noarch 2-11.fc28 nim-srpm-macros.noarch 1-1.fc28 ocaml-srpm-macros.noarch 5-2.fc27 openblas-srpm-macros.noarch 2-2.fc27 perl-srpm-macros.noarch 1-26.fc28 python-srpm-macros.noarch 3-26.fc28 qt5-srpm-macros.noarch 5.10.0-1.fc28 rust-srpm-macros.noarch 5-1.fc28 zip.riscv64 3.0-20.fc28 zstd.riscv64 1.3.3-1.fc27 Complete! + dnf -y install hack-gcc glibc-devel Last metadata expiration check: 0:04:03 ago on Thu Feb 22 15:46:14 2018. Package hack-gcc-7.3.1-0.2.riscv64 is already installed, skipping. Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: glibc-devel riscv64 2.27-4.fc28 local 1.0 M Installing dependencies: glibc-headers riscv64 2.27-4.fc28 local 442 k libxcrypt-devel riscv64 4.0.0-4.fc28 local 15 k Transaction Summary ================================================================================ Install 3 Packages Total download size: 1.4 M Installed size: 3.0 M Downloading Packages: (1/3): glibc-devel-2 0% [ ] --- B/s | 0 B --:-- ETA (1/3): libxcrypt-devel-4.0.0-4.fc28.riscv64.rpm 526 kB/s | 15 kB 00:00 (2-3/3): glibc-heade 3% [- ] 635 kB/s | 46 kB 00:02 ETA (2/3): glibc-headers-2.27-4.fc28.riscv64.rpm 1.1 MB/s | 442 kB 00:00 (3/3): glibc-devel-2 61% [============ ] 763 kB/s | 904 kB 00:00 ETA (3/3): glibc-devel-2.27-4.fc28.riscv64.rpm 1.3 MB/s | 1.0 MB 00:00 -------------------------------------------------------------------------------- Total 1.8 MB/s | 1.4 MB 00:00 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : [================ ] 1/1 Preparing : [================================= ] 1/1 Preparing : 1/1 Running scriptlet: glibc-headers-2.27-4.fc28.riscv64 1/3 Installing : glibc-headers-2.27-4.fc28 [ ] 1/3 Installing : glibc-headers-2.27-4.fc28 [= ] 1/3 Installing : glibc-headers-2.27-4.fc28 [== ] 1/3 Installing : glibc-headers-2.27-4.fc28 [=== ] 1/3 Installing : glibc-headers-2.27-4.fc28 [==== ] 1/3 Installing : glibc-headers-2.27-4.fc28 [===== ] 1/3 Installing : glibc-headers-2.27-4.fc28 [====== ] 1/3 Installing : glibc-headers-2.27-4.fc28 [======= ] 1/3 Installing : glibc-headers-2.27-4.fc28 [======== ] 1/3 Installing : glibc-headers-2.27-4.fc28 [========= ] 1/3 Installing : glibc-headers-2.27-4.fc28 [========== ] 1/3 Installing : glibc-headers-2.27-4.fc28 [=========== ] 1/3 Installing : glibc-headers-2.27-4.fc28 [============ ] 1/3 Installing : glibc-headers-2.27-4.fc28 [============= ] 1/3 Installing : glibc-headers-2.27-4.fc28 [============== ] 1/3 Installing : glibc-headers-2.27-4.fc28 [=============== ] 1/3 Installing : glibc-headers-2.27-4.fc28 [================ ] 1/3 Installing : glibc-headers-2.27-4.fc28 [================= ] 1/3 Installing : glibc-headers-2.27-4.fc28 [================== ] 1/3 Installing : glibc-headers-2.27-4.fc28 [=================== ] 1/3 Installing : glibc-headers-2.27-4.fc28 [==================== ] 1/3 Installing : glibc-headers-2.27-4.fc28 [===================== ] 1/3 Installing : glibc-headers-2.27-4.fc28 [====================== ] 1/3 Installing : glibc-headers-2.27-4.fc28 [======================= ] 1/3 Installing : glibc-headers-2.27-4.fc28 [======================== ] 1/3 Installing : glibc-headers-2.27-4.fc28 [========================= ] 1/3 Installing : glibc-headers-2.27-4.fc28.riscv64 1/3 Installing : libxcrypt-devel-4.0.0-4.f [ ] 2/3 Installing : libxcrypt-devel-4.0.0-4.f [============ ] 2/3 Installing : libxcrypt-devel-4.0.0-4.f [============= ] 2/3 Installing : libxcrypt-devel-4.0.0-4.f [===================== ] 2/3 Installing : libxcrypt-devel-4.0.0-4.f [========================= ] 2/3 Installing : libxcrypt-devel-4.0.0-4.fc28.riscv64 2/3 Installing : glibc-devel-2.27-4.fc28.r [ ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [= ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [== ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [=== ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [==== ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [===== ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [====== ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [======= ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [======== ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [========= ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [========== ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [=========== ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [============ ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [============= ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [============== ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [=============== ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [================ ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [================= ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [================== ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [=================== ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [==================== ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [===================== ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [====================== ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [======================= ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [======================== ] 3/3 Installing : glibc-devel-2.27-4.fc28.r [========================= ] 3/3 Installing : glibc-devel-2.27-4.fc28.riscv64 3/3 Running scriptlet: glibc-devel-2.27-4.fc28.riscv64 3/3 Verifying : glibc-devel-2.27-4.fc28.riscv64 1/3 Verifying : glibc-headers-2.27-4.fc28.riscv64 2/3 Verifying : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/3 Installed: glibc-devel.riscv64 2.27-4.fc28 glibc-headers.riscv64 2.27-4.fc28 libxcrypt-devel.riscv64 4.0.0-4.fc28 Complete! + touch /rootok + cleanup + set +e + sync + sleep 5 + sync + mount.static -o remount,ro / + poweroff reboot: Power down Power off