OF: fdt: Ignoring memory range 0x80000000 - 0x80200000
Linux version 4.15.0-rc9-02665-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #21 SMP Thu Feb 1 08:49:48 GMT 2018
bootconsole [early0] enabled
Initial ramdisk at: 0x (ptrval) (512 bytes)
Zone ranges:
DMA32 empty
Normal [mem 0x0000000080200000-0x00000000ffffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000080200000-0x00000000ffffffff]
Initmem setup node 0 [mem 0x0000000080200000-0x00000000ffffffff]
elf_hwcap is 0x112d
percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440
Built 1 zonelists, mobility grouping on. Total pages: 516615
Kernel command line: console=ttyS0 ro root=/dev/vda init=/init
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Sorting __ex_table...
Memory: 2054964K/2095104K available (5390K kernel code, 336K rwdata, 1472K rodata, 192K init, 848K bss, 40140K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0
riscv,cpu_intc,0: 64 local interrupts mapped
riscv,plic0,c000000: mapped 10 interrupts to 1/2 handlers
clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
Console: colour dummy device 80x25
Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
smp: Brought up 1 node, 1 CPU
devtmpfs: initialized
random: get_random_u32 called from bucket_table_alloc+0xee/0x28e with crng_init=0
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 256 (order: 2, 16384 bytes)
NET: Registered protocol family 16
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
clocksource: Switched to clocksource riscv_clocksource
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Unpacking initramfs...
Initialise system trusted keyrings
workingset: timestamp_bits=62 max_order=19 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
random: fast init done
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
console [ttyS0] disabled
10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 1, base_baud = 230400) is a 16550A
OF: fdt: Ignoring memory range 0x80000000 - 0x80200000
Linux version 4.15.0-rc9-02665-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #21 SMP Thu Feb 1 08:49:48 GMT 2018
bootconsole [early0] enabled
Initial ramdisk at: 0x (ptrval) (512 bytes)
Zone ranges:
DMA32 empty
Normal [mem 0x0000000080200000-0x00000000ffffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000080200000-0x00000000ffffffff]
Initmem setup node 0 [mem 0x0000000080200000-0x00000000ffffffff]
elf_hwcap is 0x112d
percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440
Built 1 zonelists, mobility grouping on. Total pages: 516615
Kernel command line: console=ttyS0 ro root=/dev/vda init=/init
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Sorting __ex_table...
Memory: 2054964K/2095104K available (5390K kernel code, 336K rwdata, 1472K rodata, 192K init, 848K bss, 40140K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0
riscv,cpu_intc,0: 64 local interrupts mapped
riscv,plic0,c000000: mapped 10 interrupts to 1/2 handlers
clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
Console: colour dummy device 80x25
Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
smp: Brought up 1 node, 1 CPU
devtmpfs: initialized
random: get_random_u32 called from bucket_table_alloc+0xee/0x28e with crng_init=0
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 256 (order: 2, 16384 bytes)
NET: Registered protocol family 16
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
clocksource: Switched to clocksource riscv_clocksource
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Unpacking initramfs...
Initialise system trusted keyrings
workingset: timestamp_bits=62 max_order=19 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
random: fast init done
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
console [ttyS0] disabled
10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 1, base_baud = 230400) is a 16550A
console [ttyS0] enabled
console [ttyS0] enabled
[drm] radeon kernel modesetting enabled.
[drm] radeon kernel modesetting enabled.
loop: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
libphy: Fixed MDIO Bus: probed
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
ohci-platform: OHCI generic platform driver
usbcore: registered new interface driver uas
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver usbhid
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbhid: USB HID core driver
NET: Registered protocol family 10
NET: Registered protocol family 10
Segment Routing with IPv6
Segment Routing with IPv6
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 17
Key type dns_resolver registered
Key type dns_resolver registered
bootconsole [early0] uses init memory and must be disabled even before the real one is ready
bootconsole [early0] uses init memory and must be disabled even before the real one is ready
bootconsole [early0] disabled
bootconsole [early0] disabled
Loading compiled-in X.509 certificates
EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities
EXT4-fs (vda): INFO: recovery required on readonly filesystem
EXT4-fs (vda): write access will be enabled during recovery
EXT4-fs (vda): recovery complete
EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 254:0.
Freeing unused kernel memory: 192K
This architecture does not have kernel memory protection.
EXT4-fs (vda): re-mounted. Opts: (null)
Wed Feb 14 15:42:00 UTC 2018
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff
inet 10.0.2.15/24 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::5054:ff:fe12:3456/64 scope link tentative
valid_lft forever preferred_lft forever
3: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1000
link/sit 0.0.0.0 brd 0.0.0.0
default via 10.0.2.2 dev eth0
10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15
Welcome to the Fedora/RISC-V stage4 builder
EXT4-fs (vdb): mounting ext2 file system using the ext4 subsystem
EXT4-fs (vdb): mounted filesystem without journal. Opts: (null)
+ set -e
+ rm -rf /rpmbuild
+ mkdir -p /rpmbuild
+ rpmbuild --rebuild /var/tmp/autoconf-2.69-26.fc28.src.rpm --define 'debug_package %{nil}' --undefine _annotated_build --define '_topdir /rpmbuild' --define '_missing_doc_files_terminate_build %{nil}' --define '_unitdir /usr/lib/systemd/system' --define '_sysctldir /usr/lib/sysctl.d' --define '_tmpfilesdir /usr/lib/tmpfiles.d' --define '_udevrulesdir /usr/lib/udev/rules.d' --define '_emacs_sitestartdir /usr/share/emacs/site-lisp/site-start.d' --define '_emacs_sitelispdir /usr/share/emacs/site-lisp' --nodeps --nocheck
Installing /var/tmp/autoconf-2.69-26.fc28.src.rpm
warning: user mockbuild does not exist - using root
warning: group mock does not exist - using root
warning: user mockbuild does not exist - using root
warning: group mock does not exist - using root
warning: user mockbuild does not exist - using root
warning: group mock does not exist - using root
warning: user mockbuild does not exist - using root
warning: group mock does not exist - using root
warning: user mockbuild does not exist - using root
warning: group mock does not exist - using root
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.Zqwd2X
+ umask 022
+ cd /rpmbuild/BUILD
+ cd /rpmbuild/BUILD
+ rm -rf autoconf-2.69
+ /usr/bin/xz -dc /rpmbuild/SOURCES/autoconf-2.69.tar.xz
+ /usr/bin/tar -xof -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd autoconf-2.69
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ /usr/bin/cat /rpmbuild/SOURCES/autoconf-2.69-perl-5.22-autoscan.patch
+ /usr/bin/patch -p1 -s --fuzz=0 --no-backup-if-mismatch
+ exit 0
Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.rgD4n5
+ umask 022
+ cd /rpmbuild/BUILD
+ cd autoconf-2.69
+ export EMACS=/usr/bin/emacs
+ EMACS=/usr/bin/emacs
+ CFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches '
+ export CFLAGS
+ CXXFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches '
+ export CXXFLAGS
+ FFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -I/usr/lib64/gfortran/modules'
+ export FFLAGS
+ FCFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -I/usr/lib64/gfortran/modules'
+ export FCFLAGS
+ LDFLAGS='-Wl,-z,relro '
+ export LDFLAGS
+ '[' 1 = 1 ']'
+++ dirname ./configure
++ find . -name config.guess -o -name config.sub
+ for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub)
++ basename ./build-aux/config.guess
+ '[' -f /usr/lib/rpm/redhat/config.guess ']'
+ /usr/bin/rm -f ./build-aux/config.guess
++ basename ./build-aux/config.guess
+ /usr/bin/cp -fv /usr/lib/rpm/redhat/config.guess ./build-aux/config.guess
'/usr/lib/rpm/redhat/config.guess' -> './build-aux/config.guess'
+ for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub)
++ basename ./build-aux/config.sub
+ '[' -f /usr/lib/rpm/redhat/config.sub ']'
+ /usr/bin/rm -f ./build-aux/config.sub
++ basename ./build-aux/config.sub
+ /usr/bin/cp -fv /usr/lib/rpm/redhat/config.sub ./build-aux/config.sub
'/usr/lib/rpm/redhat/config.sub' -> './build-aux/config.sub'
+ '[' 0 = 1 ']'
+ ./configure --build=riscv64-redhat-linux-gnu --host=riscv64-redhat-linux-gnu --program-prefix= --disable-dependency-tracking --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-lispdir=/usr/share/emacs/site-lisp/autoconf
configure: WARNING: unrecognized options: --disable-dependency-tracking
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking build system type... riscv64-redhat-linux-gnu
checking host system type... riscv64-redhat-linux-gnu
configure: autobuild project... GNU Autoconf
configure: autobuild revision... 2.69
configure: autobuild hostname... stage4-builder
configure: autobuild timestamp... 20180214T154213Z
checking whether /bin/sh -n is known to work... yes
checking for characters that cannot appear in file names... none
checking whether directories can have trailing spaces... yes
checking for expr... /usr/bin/expr
checking for GNU M4 that supports accurate traces... /usr/bin/m4
checking whether /usr/bin/m4 accepts --gnu... yes
checking how m4 supports trace files... --debugfile
checking for perl... /usr/bin/perl
checking whether /usr/bin/perl Fcntl::flock is implemented... yes
checking for emacs... /usr/bin/emacs
checking whether /usr/bin/emacs is sufficiently recent... no
checking for emacs... no
checking where .elc files should go... /usr/share/emacs/site-lisp/autoconf
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for a sed that does not truncate output... /usr/bin/sed
checking whether make is case sensitive... yes
configure: creating ./config.status
config.status: creating tests/Makefile
config.status: creating tests/atlocal
config.status: creating man/Makefile
config.status: creating lib/emacs/Makefile
config.status: creating Makefile
config.status: creating doc/Makefile
config.status: creating lib/Makefile
config.status: creating lib/Autom4te/Makefile
config.status: creating lib/autoscan/Makefile
config.status: creating lib/m4sugar/Makefile
config.status: creating lib/autoconf/Makefile
config.status: creating lib/autotest/Makefile
config.status: creating bin/Makefile
config.status: executing tests/atconfig commands
configure: WARNING: unrecognized options: --disable-dependency-tracking
+ make
make all-recursive
make[1]: Entering directory '/rpmbuild/BUILD/autoconf-2.69'
Making all in bin
make[2]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/bin'
rm -f autom4te autom4te.tmp
srcdir=''; \
test -f ./autom4te.in || srcdir=./; \
sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/usr/bin/perl|g' -e 's|@PERL_FLOCK[@]|yes|g' -e 's|@bindir[@]|/usr/bin|g' -e 's|@pkgdatadir[@]|/usr/share/autoconf|g' -e 's|@prefix[@]|/usr|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's&^&&'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's&^&&'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's&^&&'`'|g' -e 's|@M4[@]|/usr/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.69|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from autom4te.in; do not edit by hand.|g' ${srcdir}autom4te.in >autom4te.tmp
chmod +x autom4te.tmp
chmod a-w autom4te.tmp
mv autom4te.tmp autom4te
cd ../lib && make autom4te.cfg
make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib'
rm -f autom4te.cfg autom4te.tmp
sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/usr/bin/perl|g' -e 's|@bindir[@]|/usr/bin|g' -e 's|@pkgdatadir[@]|/usr/share/autoconf|g' -e 's|@prefix[@]|/usr|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's&^&&'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's&^&&'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's&^&&'`'|g' -e 's|@M4[@]|/usr/bin/m4|g' -e 's|@AWK[@]|gawk|g' -e 's|@VERSION[@]|2.69|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' ./autom4te.in >autom4te.tmp
chmod a-w autom4te.tmp
mv autom4te.tmp autom4te.cfg
make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib'
cd ../lib/m4sugar && make version.m4
make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/m4sugar'
:;{ \
echo '# This file is part of -*- Autoconf -*-.' && \
echo '# Version of Autoconf.' && \
echo '# Copyright (C) 1999, 2000, 2001, 2002, 2006, 2007, 2009' && \
echo '# Free Software Foundation, Inc.' && \
echo &&\
echo 'm4_define([m4_PACKAGE_NAME], [GNU Autoconf])' && \
echo 'm4_define([m4_PACKAGE_TARNAME], [autoconf])' && \
echo 'm4_define([m4_PACKAGE_VERSION], [2.69])' && \
echo 'm4_define([m4_PACKAGE_STRING], [GNU Autoconf 2.69])' && \
echo 'm4_define([m4_PACKAGE_BUGREPORT], [bug-autoconf@gnu.org])' && \
echo 'm4_define([m4_PACKAGE_URL], [http://www.gnu.org/software/autoconf/])' && \
echo 'm4_define([m4_PACKAGE_YEAR], ['`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../../ChangeLog`'])'; \
} > version.m4-t
mv version.m4-t version.m4
make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/m4sugar'
autom4te_perllibdir='..'/lib AUTOM4TE_CFG='../lib/autom4te.cfg' ../bin/autom4te -B '..'/lib -B '..'/lib --language M4sh --cache '' --melt ./autoconf.as -o autoconf.in
rm -f autoconf autoconf.tmp
srcdir=''; \
test -f ./autoconf.in || srcdir=./; \
sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/usr/bin/perl|g' -e 's|@PERL_FLOCK[@]|yes|g' -e 's|@bindir[@]|/usr/bin|g' -e 's|@pkgdatadir[@]|/usr/share/autoconf|g' -e 's|@prefix[@]|/usr|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's&^&&'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's&^&&'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's&^&&'`'|g' -e 's|@M4[@]|/usr/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.69|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from autoconf.in; do not edit by hand.|g' ${srcdir}autoconf.in >autoconf.tmp
chmod +x autoconf.tmp
chmod a-w autoconf.tmp
mv autoconf.tmp autoconf
rm -f autoheader autoheader.tmp
srcdir=''; \
test -f ./autoheader.in || srcdir=./; \
sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/usr/bin/perl|g' -e 's|@PERL_FLOCK[@]|yes|g' -e 's|@bindir[@]|/usr/bin|g' -e 's|@pkgdatadir[@]|/usr/share/autoconf|g' -e 's|@prefix[@]|/usr|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's&^&&'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's&^&&'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's&^&&'`'|g' -e 's|@M4[@]|/usr/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.69|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from autoheader.in; do not edit by hand.|g' ${srcdir}autoheader.in >autoheader.tmp
chmod +x autoheader.tmp
chmod a-w autoheader.tmp
mv autoheader.tmp autoheader
rm -f autoreconf autoreconf.tmp
srcdir=''; \
test -f ./autoreconf.in || srcdir=./; \
sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/usr/bin/perl|g' -e 's|@PERL_FLOCK[@]|yes|g' -e 's|@bindir[@]|/usr/bin|g' -e 's|@pkgdatadir[@]|/usr/share/autoconf|g' -e 's|@prefix[@]|/usr|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's&^&&'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's&^&&'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's&^&&'`'|g' -e 's|@M4[@]|/usr/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.69|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from autoreconf.in; do not edit by hand.|g' ${srcdir}autoreconf.in >autoreconf.tmp
chmod +x autoreconf.tmp
chmod a-w autoreconf.tmp
mv autoreconf.tmp autoreconf
rm -f ifnames ifnames.tmp
srcdir=''; \
test -f ./ifnames.in || srcdir=./; \
sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/usr/bin/perl|g' -e 's|@PERL_FLOCK[@]|yes|g' -e 's|@bindir[@]|/usr/bin|g' -e 's|@pkgdatadir[@]|/usr/share/autoconf|g' -e 's|@prefix[@]|/usr|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's&^&&'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's&^&&'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's&^&&'`'|g' -e 's|@M4[@]|/usr/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.69|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from ifnames.in; do not edit by hand.|g' ${srcdir}ifnames.in >ifnames.tmp
chmod +x ifnames.tmp
chmod a-w ifnames.tmp
mv ifnames.tmp ifnames
rm -f autoscan autoscan.tmp
srcdir=''; \
test -f ./autoscan.in || srcdir=./; \
sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/usr/bin/perl|g' -e 's|@PERL_FLOCK[@]|yes|g' -e 's|@bindir[@]|/usr/bin|g' -e 's|@pkgdatadir[@]|/usr/share/autoconf|g' -e 's|@prefix[@]|/usr|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's&^&&'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's&^&&'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's&^&&'`'|g' -e 's|@M4[@]|/usr/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.69|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from autoscan.in; do not edit by hand.|g' ${srcdir}autoscan.in >autoscan.tmp
chmod +x autoscan.tmp
chmod a-w autoscan.tmp
mv autoscan.tmp autoscan
rm -f autoupdate autoupdate.tmp
srcdir=''; \
test -f ./autoupdate.in || srcdir=./; \
sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/usr/bin/perl|g' -e 's|@PERL_FLOCK[@]|yes|g' -e 's|@bindir[@]|/usr/bin|g' -e 's|@pkgdatadir[@]|/usr/share/autoconf|g' -e 's|@prefix[@]|/usr|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's&^&&'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's&^&&'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's&^&&'`'|g' -e 's|@M4[@]|/usr/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.69|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from autoupdate.in; do not edit by hand.|g' ${srcdir}autoupdate.in >autoupdate.tmp
chmod +x autoupdate.tmp
chmod a-w autoupdate.tmp
mv autoupdate.tmp autoupdate
make[2]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/bin'
Making all in .
make[2]: Entering directory '/rpmbuild/BUILD/autoconf-2.69'
make[2]: Nothing to be done for 'all-am'.
make[2]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69'
Making all in lib
make[2]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib'
Making all in Autom4te
make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/Autom4te'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/Autom4te'
Making all in m4sugar
make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/m4sugar'
autom4te_perllibdir='../..'/lib AUTOM4TE_CFG='../../lib/autom4te.cfg' ../../bin/autom4te -B '../..'/lib -B '../..'/lib \
--language=m4sugar \
--freeze \
--output=m4sugar.m4f
autom4te_perllibdir='../..'/lib AUTOM4TE_CFG='../../lib/autom4te.cfg' ../../bin/autom4te -B '../..'/lib -B '../..'/lib \
--language=m4sh \
--freeze \
--output=m4sh.m4f
make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/m4sugar'
Making all in autoconf
make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/autoconf'
autom4te_perllibdir='../..'/lib AUTOM4TE_CFG='../../lib/autom4te.cfg' ../../bin/autom4te -B '../..'/lib -B '../..'/lib \
--language=autoconf \
--freeze \
--output=autoconf.m4f
make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/autoconf'
Making all in autotest
make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/autotest'
autom4te_perllibdir='../..'/lib AUTOM4TE_CFG='../../lib/autom4te.cfg' ../../bin/autom4te -B '../..'/lib -B '../..'/lib \
--language=autotest \
--freeze \
--output=autotest.m4f
make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/autotest'
Making all in autoscan
make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/autoscan'
echo '# Automatically Generated: do not edit this file' >autoscan.list
sed '/^[#]/!q' ./autoscan.pre >>autoscan.list
( \
sed -n '/^[^#]/p' ./autoscan.pre; \
autom4te_perllibdir='../..'/lib AUTOM4TE_CFG='../../lib/autom4te.cfg' ../../bin/autom4te -B '../..'/lib -B '../..'/lib --cache '' -M -l autoconf -t'AN_OUTPUT:$1: $2 $3' \
) | LC_ALL=C sort >>autoscan.list
make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/autoscan'
Making all in emacs
make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/emacs'
WARNING: Warnings can be ignored. :-)
if test "no" != no; then \
set x; \
list='autoconf-mode.el autotest-mode.el'; for p in $list; do \
if test -f "$p"; then d=; else d="./"; fi; \
set x "$@" "$d$p"; shift; \
done; \
shift; \
EMACS="no" /bin/sh ../../build-aux/elisp-comp "$@" || exit 1; \
else : ; fi
make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/emacs'
make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib'
make[2]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib'
Making all in doc
make[2]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/doc'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/doc'
Making all in tests
make[2]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/tests'
autom4te_perllibdir='..'/lib AUTOM4TE_CFG='../lib/autom4te.cfg' ../bin/autom4te -B '..'/lib -B '..'/lib --language=M4sh ./wrapper.as -o wrapper.in
rm -f autoconf autoconf.tmp
input=wrapper.in; \
sed -e 's|@wrap_program[@]|autoconf|g' -e 's|@abs_top_srcdir[@]|/rpmbuild/BUILD/autoconf-2.69|g' -e 's|@abs_top_builddir[@]|/rpmbuild/BUILD/autoconf-2.69|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >autoconf.tmp
chmod +x autoconf.tmp
chmod a-w autoconf.tmp
mv -f autoconf.tmp autoconf
rm -f autoheader autoheader.tmp
input=wrapper.in; \
sed -e 's|@wrap_program[@]|autoheader|g' -e 's|@abs_top_srcdir[@]|/rpmbuild/BUILD/autoconf-2.69|g' -e 's|@abs_top_builddir[@]|/rpmbuild/BUILD/autoconf-2.69|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >autoheader.tmp
chmod +x autoheader.tmp
chmod a-w autoheader.tmp
mv -f autoheader.tmp autoheader
rm -f autom4te autom4te.tmp
input=wrapper.in; \
sed -e 's|@wrap_program[@]|autom4te|g' -e 's|@abs_top_srcdir[@]|/rpmbuild/BUILD/autoconf-2.69|g' -e 's|@abs_top_builddir[@]|/rpmbuild/BUILD/autoconf-2.69|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >autom4te.tmp
chmod +x autom4te.tmp
chmod a-w autom4te.tmp
mv -f autom4te.tmp autom4te
rm -f autoreconf autoreconf.tmp
input=wrapper.in; \
sed -e 's|@wrap_program[@]|autoreconf|g' -e 's|@abs_top_srcdir[@]|/rpmbuild/BUILD/autoconf-2.69|g' -e 's|@abs_top_builddir[@]|/rpmbuild/BUILD/autoconf-2.69|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >autoreconf.tmp
chmod +x autoreconf.tmp
chmod a-w autoreconf.tmp
mv -f autoreconf.tmp autoreconf
rm -f autoscan autoscan.tmp
input=wrapper.in; \
sed -e 's|@wrap_program[@]|autoscan|g' -e 's|@abs_top_srcdir[@]|/rpmbuild/BUILD/autoconf-2.69|g' -e 's|@abs_top_builddir[@]|/rpmbuild/BUILD/autoconf-2.69|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >autoscan.tmp
chmod +x autoscan.tmp
chmod a-w autoscan.tmp
mv -f autoscan.tmp autoscan
rm -f autoupdate autoupdate.tmp
input=wrapper.in; \
sed -e 's|@wrap_program[@]|autoupdate|g' -e 's|@abs_top_srcdir[@]|/rpmbuild/BUILD/autoconf-2.69|g' -e 's|@abs_top_builddir[@]|/rpmbuild/BUILD/autoconf-2.69|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >autoupdate.tmp
chmod +x autoupdate.tmp
chmod a-w autoupdate.tmp
mv -f autoupdate.tmp autoupdate
rm -f ifnames ifnames.tmp
input=wrapper.in; \
sed -e 's|@wrap_program[@]|ifnames|g' -e 's|@abs_top_srcdir[@]|/rpmbuild/BUILD/autoconf-2.69|g' -e 's|@abs_top_builddir[@]|/rpmbuild/BUILD/autoconf-2.69|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >ifnames.tmp
chmod +x ifnames.tmp
chmod a-w ifnames.tmp
mv -f ifnames.tmp ifnames
make[2]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/tests'
Making all in man
make[2]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/man'
Updating man page autoscan.1
PATH="../tests:../build-aux:$PATH"; \
export PATH; \
/bin/sh /rpmbuild/BUILD/autoconf-2.69/build-aux/missing --run help2man \
--include=autoscan.x \
--include=./common.x \
--source='GNU Autoconf 2.69' \
--output=autoscan.1.t `echo 'autoscan' | sed 's,.*/,,'`
if sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' autoscan.1 >autoscan.1a.t 2>/dev/null && \
sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' autoscan.1.t | cmp autoscan.1a.t - >/dev/null 2>&1; then \
touch autoscan.1; \
else \
mv autoscan.1.t autoscan.1; \
fi
rm -f autoscan.1*.t
Updating man page config.guess.1
PATH="../tests:../build-aux:$PATH"; \
export PATH; \
/bin/sh /rpmbuild/BUILD/autoconf-2.69/build-aux/missing --run help2man \
--include=config.guess.x \
--include=./common.x \
--source='GNU Autoconf 2.69' \
--output=config.guess.1.t `echo 'config.guess' | sed 's,.*/,,'`
if sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' config.guess.1 >config.guess.1a.t 2>/dev/null && \
sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' config.guess.1.t | cmp config.guess.1a.t - >/dev/null 2>&1; then \
touch config.guess.1; \
else \
mv config.guess.1.t config.guess.1; \
fi
rm -f config.guess.1*.t
Updating man page config.sub.1
PATH="../tests:../build-aux:$PATH"; \
export PATH; \
/bin/sh /rpmbuild/BUILD/autoconf-2.69/build-aux/missing --run help2man \
--include=config.sub.x \
--include=./common.x \
--source='GNU Autoconf 2.69' \
--output=config.sub.1.t `echo 'config.sub' | sed 's,.*/,,'`
if sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' config.sub.1 >config.sub.1a.t 2>/dev/null && \
sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' config.sub.1.t | cmp config.sub.1a.t - >/dev/null 2>&1; then \
touch config.sub.1; \
else \
mv config.sub.1.t config.sub.1; \
fi
rm -f config.sub.1*.t
make[2]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/man'
make[1]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69'
+ exit 0
Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.Oyxq1a
+ umask 022
+ cd /rpmbuild/BUILD
+ '[' /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64 '!=' / ']'
+ rm -rf /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64
++ dirname /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64
+ mkdir -p /rpmbuild/BUILDROOT
+ mkdir /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64
+ cd autoconf-2.69
+ make install DESTDIR=/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64
make install-recursive
make[1]: Entering directory '/rpmbuild/BUILD/autoconf-2.69'
Making install in bin
make[2]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/bin'
make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/bin'
test -z "/usr/bin" || /usr/bin/mkdir -p "/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/bin"
/usr/bin/install -c autom4te autoconf autoheader autoreconf ifnames autoscan autoupdate '/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/bin'
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/bin'
make[2]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/bin'
Making install in .
make[2]: Entering directory '/rpmbuild/BUILD/autoconf-2.69'
make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69'
make[3]: Nothing to be done for 'install-exec-am'.
test -z "/usr/share/autoconf" || /usr/bin/mkdir -p "/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf"
/usr/bin/install -c -m 644 ./INSTALL '/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf'
make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69'
make[2]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69'
Making install in lib
make[2]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib'
Making install in Autom4te
make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/Autom4te'
make[4]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/Autom4te'
make[4]: Nothing to be done for 'install-exec-am'.
test -z "/usr/share/autoconf/Autom4te" || /usr/bin/mkdir -p "/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf/Autom4te"
/usr/bin/install -c -m 644 C4che.pm ChannelDefs.pm Channels.pm Configure_ac.pm FileUtils.pm General.pm Getopt.pm Request.pm XFile.pm '/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf/Autom4te'
make[4]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/Autom4te'
make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/Autom4te'
Making install in m4sugar
make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/m4sugar'
make[4]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/m4sugar'
make[4]: Nothing to be done for 'install-exec-am'.
test -z "/usr/share/autoconf/m4sugar" || /usr/bin/mkdir -p "/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf/m4sugar"
/usr/bin/install -c -m 644 m4sugar.m4 foreach.m4 m4sh.m4 '/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf/m4sugar'
test -z "/usr/share/autoconf/m4sugar" || /usr/bin/mkdir -p "/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf/m4sugar"
/usr/bin/install -c -m 644 version.m4 m4sugar.m4f m4sh.m4f '/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf/m4sugar'
make[4]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/m4sugar'
make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/m4sugar'
Making install in autoconf
make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/autoconf'
make[4]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/autoconf'
make[4]: Nothing to be done for 'install-exec-am'.
test -z "/usr/share/autoconf/autoconf" || /usr/bin/mkdir -p "/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf/autoconf"
/usr/bin/install -c -m 644 autoconf.m4 general.m4 status.m4 oldnames.m4 specific.m4 autoheader.m4 autoupdate.m4 autotest.m4 autoscan.m4 lang.m4 c.m4 erlang.m4 fortran.m4 functions.m4 go.m4 headers.m4 types.m4 libs.m4 programs.m4 '/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf/autoconf'
test -z "/usr/share/autoconf/autoconf" || /usr/bin/mkdir -p "/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf/autoconf"
/usr/bin/install -c -m 644 autoconf.m4f '/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf/autoconf'
make[4]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/autoconf'
make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/autoconf'
Making install in autotest
make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/autotest'
make[4]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/autotest'
make[4]: Nothing to be done for 'install-exec-am'.
test -z "/usr/share/autoconf/autotest" || /usr/bin/mkdir -p "/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf/autotest"
/usr/bin/install -c -m 644 autotest.m4 general.m4 specific.m4 '/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf/autotest'
test -z "/usr/share/autoconf/autotest" || /usr/bin/mkdir -p "/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf/autotest"
/usr/bin/install -c -m 644 autotest.m4f '/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf/autotest'
make[4]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/autotest'
make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/autotest'
Making install in autoscan
make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/autoscan'
make[4]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/autoscan'
make[4]: Nothing to be done for 'install-exec-am'.
test -z "/usr/share/autoconf/autoscan" || /usr/bin/mkdir -p "/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf/autoscan"
/usr/bin/install -c -m 644 autoscan.list '/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf/autoscan'
make[4]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/autoscan'
make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/autoscan'
Making install in emacs
make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/emacs'
make[4]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib/emacs'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/emacs'
make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib/emacs'
make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib'
make[4]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/lib'
make[4]: Nothing to be done for 'install-exec-am'.
test -z "/usr/share/autoconf" || /usr/bin/mkdir -p "/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf"
/usr/bin/install -c -m 644 autom4te.cfg '/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/autoconf'
make[4]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib'
make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib'
make[2]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/lib'
Making install in doc
make[2]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/doc'
make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/doc'
make[3]: Nothing to be done for 'install-exec-am'.
test -z "/usr/share/info" || /usr/bin/mkdir -p "/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/info"
/usr/bin/install -c -m 644 ./autoconf.info ./standards.info '/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/info'
install-info --info-dir='/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/info' '/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/info/autoconf.info'
install-info --info-dir='/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/info' '/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/info/standards.info'
make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/doc'
make[2]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/doc'
Making install in tests
make[2]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/tests'
make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/tests'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/tests'
make[2]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/tests'
Making install in man
make[2]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/man'
make[3]: Entering directory '/rpmbuild/BUILD/autoconf-2.69/man'
make[3]: Nothing to be done for 'install-exec-am'.
test -z "/usr/share/man/man1" || /usr/bin/mkdir -p "/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/man/man1"
/usr/bin/install -c -m 644 ./autoconf.1 ./autoheader.1 ./autom4te.1 ./autoreconf.1 ./autoscan.1 ./autoupdate.1 ./ifnames.1 ./config.guess.1 ./config.sub.1 '/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/man/man1'
make[3]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/man'
make[2]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69/man'
make[1]: Leaving directory '/rpmbuild/BUILD/autoconf-2.69'
+ mkdir -p /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/share
+ install -m 0644 /rpmbuild/SOURCES/config.site /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share
+ mkdir -p /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/emacs/site-lisp/site-start.d
+ install -p -m 0644 /rpmbuild/SOURCES/autoconf-init.el /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/emacs/site-lisp/site-start.d
+ /usr/lib/rpm/check-buildroot
+ /usr/lib/rpm/brp-compress
+ /usr/lib/rpm/brp-strip /usr/bin/strip
+ /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump
+ /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip
+ /usr/lib/rpm/brp-python-bytecompile /usr/bin/python 1
+ /usr/lib/rpm/brp-python-hardlink
+ /usr/lib/rpm/redhat/brp-java-repack-jars
Processing files: autoconf-2.69-26.fc27.noarch
Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.Zujn0u
+ umask 022
+ cd /rpmbuild/BUILD
+ cd autoconf-2.69
+ DOCDIR=/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/doc/autoconf
+ export LC_ALL=C
+ LC_ALL=C
+ export DOCDIR
+ /usr/bin/mkdir -p /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/doc/autoconf
+ cp -pr AUTHORS /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/doc/autoconf
+ cp -pr ChangeLog /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/doc/autoconf
+ cp -pr NEWS /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/doc/autoconf
+ cp -pr README /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/doc/autoconf
+ cp -pr THANKS /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/doc/autoconf
+ cp -pr TODO /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/doc/autoconf
+ exit 0
Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.YO8Dqk
+ umask 022
+ cd /rpmbuild/BUILD
+ cd autoconf-2.69
+ LICENSEDIR=/rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/licenses/autoconf
+ export LC_ALL=C
+ LC_ALL=C
+ export LICENSEDIR
+ /usr/bin/mkdir -p /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/licenses/autoconf
+ cp -pr COPYING COPYING.EXCEPTION COPYINGv3 /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64/usr/share/licenses/autoconf
+ exit 0
Provides: autoconf = 2.69-26.fc27
Requires(interp): /bin/sh /bin/sh
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires(post): /bin/sh /sbin/install-info
Requires(preun): /bin/sh /sbin/install-info
Requires: /bin/sh /usr/bin/perl
Checking for unpackaged file(s): /usr/lib/rpm/check-files /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64
warning: Could not canonicalize hostname: stage4-builder
Wrote: /rpmbuild/RPMS/noarch/autoconf-2.69-26.fc27.noarch.rpm
Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.MgIyRf
+ umask 022
+ cd /rpmbuild/BUILD
+ cd autoconf-2.69
+ /usr/bin/rm -rf /rpmbuild/BUILDROOT/autoconf-2.69-26.fc27.riscv64
+ exit 0
Executing(--clean): /bin/sh -e /var/tmp/rpm-tmp.pc2TMh
+ umask 022
+ cd /rpmbuild/BUILD
+ rm -rf autoconf-2.69
+ exit 0
+ touch /buildok
+ cleanup
+ set +e
+ sync
+ sleep 5
+ sync
+ mount.static -o remount,ro /
+ poweroff
reboot: Power down
Power off