Freevo

 

Hardware/ivtv

Site Index:

  1. General Info
  2. IVTV Driver
  3. TV-Out
  4. LIRC / WinTV PCR remote control
  5. Freevo setup for IVTV

General Info

There is support for the WinTV-PVR series of cards in Freevo; the WinTV-PVR 250/350 cards have recently been getting a lot more attention.

IVTV Driver

The drivers for these cards are under active development and are becoming stable, see [WWW] http://ivtv.sourceforge.net . Please make sure your card and the ivtv driver are working properly before trying to use it in Freevo. That is, download and install the latest ivtv driver; you'll find information on this in the [WWW] IVTV documentation and the [WWW] IVTV FAQ. Basically, this boils down to:

The MythTV site offers an excellent page that describes how to [WWW] install a PVR-250/350 on Mandrake 9.1. It may be helpful for other distros as well.

TV-Out

If you want Freevo to use the WinTV PVR card's TV-out, you can use the TV-out as a standard framebuffer device for X. Once you get X working with this framebuffer device freevo works with it just like any other X display. This is explained in the [WWW] TvOutHowto page of the IVTV Wiki.

LIRC / WinTV PCR remote control

After setting up the IVTV driver, you might want to set up LIRC, too. My lirc came with a suitable lircd.conf.hauppauge config file which actually contains two separate descriptions of remote controls. The second one matches my remote (that came with the PVR 350). See Configuration / Lirc for more info.

Freevo setup for IVTV

See AnalogTvConfig

last edited 2004-12-31 12:16:38 by BHeremans
current version: http://freevo.sourceforge.net/cgi-bin/doc/Hardware/ivtv