commit bbb957e1bd4a337c0d10d599d284a7475bca47cb Author: Greg Kroah-Hartman Date: Thu Jan 27 09:01:02 2022 +0100 Linux 4.14.263 Link: https://lore.kernel.org/r/20220124183937.101330125@linuxfoundation.org Link: https://lore.kernel.org/r/20220125155257.311556629@linuxfoundation.org Tested-by: Jon Hunter Tested-by: Linux Kernel Functional Testing Tested-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit d5e6dff8c92943a2719fa5415cc3d333e57d5d90 Author: Trond Myklebust Date: Wed Jun 9 10:04:46 2021 -0400 NFSv4: Initialise connection to the server in nfs4_alloc_client() commit dd99e9f98fbf423ff6d365b37a98e8879170f17c upstream. Set up the connection to the NFSv4 server in nfs4_alloc_client(), before we've added the struct nfs_client to the net-namespace's nfs_client_list so that a downed server won't cause other mounts to hang in the trunking detection code. Reported-by: Michael Wakabayashi Fixes: 5c6e5b60aae4 ("NFS: Fix an Oops in the pNFS files and flexfiles connection setup to the DS") Signed-off-by: Trond Myklebust Signed-off-by: Greg Kroah-Hartman commit 93e83b226a16bcc800013c6e02c98eef7ba9868c Author: Michael Braun Date: Thu Mar 4 20:52:52 2021 +0100 gianfar: fix jumbo packets+napi+rx overrun crash commit d8861bab48b6c1fc3cdbcab8ff9d1eaea43afe7f upstream. When using jumbo packets and overrunning rx queue with napi enabled, the following sequence is observed in gfar_add_rx_frag: | lstatus | | skb | t | lstatus, size, flags | first | len, data_len, *ptr | ---+--------------------------------------+-------+-----------------------+ 13 | 18002348, 9032, INTERRUPT LAST | 0 | 9600, 8000, f554c12e | 12 | 10000640, 1600, INTERRUPT | 0 | 8000, 6400, f554c12e | 11 | 10000640, 1600, INTERRUPT | 0 | 6400, 4800, f554c12e | 10 | 10000640, 1600, INTERRUPT | 0 | 4800, 3200, f554c12e | 09 | 10000640, 1600, INTERRUPT | 0 | 3200, 1600, f554c12e | 08 | 14000640, 1600, INTERRUPT FIRST | 0 | 1600, 0, f554c12e | 07 | 14000640, 1600, INTERRUPT FIRST | 1 | 0, 0, f554c12e | 06 | 1c000080, 128, INTERRUPT LAST FIRST | 1 | 0, 0, abf3bd6e | 05 | 18002348, 9032, INTERRUPT LAST | 0 | 8000, 6400, c5a57780 | 04 | 10000640, 1600, INTERRUPT | 0 | 6400, 4800, c5a57780 | 03 | 10000640, 1600, INTERRUPT | 0 | 4800, 3200, c5a57780 | 02 | 10000640, 1600, INTERRUPT | 0 | 3200, 1600, c5a57780 | 01 | 10000640, 1600, INTERRUPT | 0 | 1600, 0, c5a57780 | 00 | 14000640, 1600, INTERRUPT FIRST | 1 | 0, 0, c5a57780 | So at t=7 a new packets is started but not finished, probably due to rx overrun - but rx overrun is not indicated in the flags. Instead a new packets starts at t=8. This results in skb->len to exceed size for the LAST fragment at t=13 and thus a negative fragment size added to the skb. This then crashes: kernel BUG at include/linux/skbuff.h:2277! Oops: Exception in kernel mode, sig: 5 [#1] ... NIP [c04689f4] skb_pull+0x2c/0x48 LR [c03f62ac] gfar_clean_rx_ring+0x2e4/0x844 Call Trace: [ec4bfd38] [c06a84c4] _raw_spin_unlock_irqrestore+0x60/0x7c (unreliable) [ec4bfda8] [c03f6a44] gfar_poll_rx_sq+0x48/0xe4 [ec4bfdc8] [c048d504] __napi_poll+0x54/0x26c [ec4bfdf8] [c048d908] net_rx_action+0x138/0x2c0 [ec4bfe68] [c06a8f34] __do_softirq+0x3a4/0x4fc [ec4bfed8] [c0040150] run_ksoftirqd+0x58/0x70 [ec4bfee8] [c0066ecc] smpboot_thread_fn+0x184/0x1cc [ec4bff08] [c0062718] kthread+0x140/0x144 [ec4bff38] [c0012350] ret_from_kernel_thread+0x14/0x1c This patch fixes this by checking for computed LAST fragment size, so a negative sized fragment is never added. In order to prevent the newer rx frame from getting corrupted, the FIRST flag is checked to discard the incomplete older frame. Signed-off-by: Michael Braun Signed-off-by: David S. Miller Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman commit 5eaff82239b6c967d2185b52b8c5a2f4cc3b246d Author: Andy Spencer Date: Thu Feb 22 11:05:33 2018 -0800 gianfar: simplify FCS handling and fix memory leak commit d903ec77118c09f93a610b384d83a6df33a64fe6 upstream. Previously, buffer descriptors containing only the frame check sequence (FCS) were skipped and not added to the skb. However, the page reference count was still incremented, leading to a memory leak. Fixing this inside gfar_add_rx_frag() is difficult due to reserved memory handling and page reuse. Instead, move the FCS handling to gfar_process_frame() and trim off the FCS before passing the skb up the networking stack. Signed-off-by: Andy Spencer Signed-off-by: Jim Gruen Signed-off-by: David S. Miller Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman commit f78d626801194ffac2c140de72e5b7937fac33f6 Author: Amir Goldstein Date: Mon Jan 24 16:18:28 2022 +0100 fuse: fix live lock in fuse_iget() commit 775c5033a0d164622d9d10dd0f0a5531639ed3ed upstream. Commit 5d069dbe8aaf ("fuse: fix bad inode") replaced make_bad_inode() in fuse_iget() with a private implementation fuse_make_bad(). The private implementation fails to remove the bad inode from inode cache, so the retry loop with iget5_locked() finds the same bad inode and marks it bad forever. kmsg snip: [ ] rcu: INFO: rcu_sched self-detected stall on CPU ... [ ] ? bit_wait_io+0x50/0x50 [ ] ? fuse_init_file_inode+0x70/0x70 [ ] ? find_inode.isra.32+0x60/0xb0 [ ] ? fuse_init_file_inode+0x70/0x70 [ ] ilookup5_nowait+0x65/0x90 [ ] ? fuse_init_file_inode+0x70/0x70 [ ] ilookup5.part.36+0x2e/0x80 [ ] ? fuse_init_file_inode+0x70/0x70 [ ] ? fuse_inode_eq+0x20/0x20 [ ] iget5_locked+0x21/0x80 [ ] ? fuse_inode_eq+0x20/0x20 [ ] fuse_iget+0x96/0x1b0 Fixes: 5d069dbe8aaf ("fuse: fix bad inode") Signed-off-by: Amir Goldstein Signed-off-by: Miklos Szeredi Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman commit 2cd45139c0f28ebfa7604866faee00c99231a62b Author: Miklos Szeredi Date: Mon Jan 24 16:17:18 2022 +0100 fuse: fix bad inode commit 5d069dbe8aaf2a197142558b6fb2978189ba3454 upstream. Jan Kara's analysis of the syzbot report (edited): The reproducer opens a directory on FUSE filesystem, it then attaches dnotify mark to the open directory. After that a fuse_do_getattr() call finds that attributes returned by the server are inconsistent, and calls make_bad_inode() which, among other things does: inode->i_mode = S_IFREG; This then confuses dnotify which doesn't tear down its structures properly and eventually crashes. Avoid calling make_bad_inode() on a live inode: switch to a private flag on the fuse inode. Also add the test to ops which the bad_inode_ops would have caught. This bug goes back to the initial merge of fuse in 2.6.14... Reported-by: syzbot+f427adf9324b92652ccc@syzkaller.appspotmail.com Signed-off-by: Miklos Szeredi Tested-by: Jan Kara Cc: [bwh: Backported to 4.19: - Drop changes in fuse_dir_fsync(), fuse_readahead(), fuse_evict_inode() - In fuse_get_link(), return ERR_PTR(-EIO) for bad inodes - Convert some additional calls to is_bad_inode() - Adjust filename, context] Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman commit 4a2cec066dc8d099d30c649ae7ed26771029e0b5 Author: Dave Airlie Date: Tue Jul 28 14:17:36 2020 +1000 drm/ttm/nouveau: don't call tt destroy callback on alloc failure. commit 5de5b6ecf97a021f29403aa272cb4e03318ef586 upstream. This is confusing, and from my reading of all the drivers only nouveau got this right. Just make the API act under driver control of it's own allocation failing, and don't call destroy, if the page table fails to create there is nothing to cleanup here. (I'm willing to believe I've missed something here, so please review deeply). Reviewed-by: Christian König Signed-off-by: Dave Airlie Link: https://patchwork.freedesktop.org/patch/msgid/20200728041736.20689-1-airlied@gmail.com [bwh: Backported to 4.14: - Drop change in ttm_sg_tt_init() - Adjust context] Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman commit 70b5928f5cd289b2ccf34384ca83b1d9ee7a0fad Author: Ben Hutchings Date: Mon Jan 24 16:11:18 2022 +0100 mips,s390,sh,sparc: gup: Work around the "COW can break either way" issue In Linux 4.14 and 4.19 these architectures still have their own implementations of get_user_pages_fast(). These also need to force the write flag on when taking the fast path. Fixes: 407faed92b4a ("gup: document and work around "COW can break either way" issue") Fixes: 5e24029791e8 ("gup: document and work around "COW can break either way" issue") Signed-off-by: Ben Hutchings commit 04d1dbd1e8e21fc115a839ef39bf66a26542c98c Author: Miaoqian Lin Date: Fri Jan 14 06:57:24 2022 +0000 lib82596: Fix IRQ check in sni_82596_probe commit 99218cbf81bf21355a3de61cd46a706d36e900e6 upstream. platform_get_irq() returns negative error number instead 0 on failure. And the doc of platform_get_irq() provides a usage example: int irq = platform_get_irq(pdev, 0); if (irq < 0) return irq; Fix the check of return value to catch errors correctly. Fixes: 115978859272 ("i825xx: Move the Intel 82586/82593/82596 based drivers") Signed-off-by: Miaoqian Lin Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 1a30f9c76b575db2d546b53e913afba11c79bd0c Author: Matthias Schiffer Date: Thu Jan 13 09:19:18 2022 +0100 scripts/dtc: dtx_diff: remove broken example from help text commit d8adf5b92a9d2205620874d498c39923ecea8749 upstream. dtx_diff suggests to use <(...) syntax to pipe two inputs into it, but this has never worked: The /proc/self/fds/... paths passed by the shell will fail the `[ -f "${dtx}" ] && [ -r "${dtx}" ]` check in compile_to_dts, but even with this check removed, the function cannot work: hexdump will eat up the DTB magic, making the subsequent dtc call fail, as a pipe cannot be rewound. Simply remove this broken example, as there is already an alternative one that works fine. Fixes: 10eadc253ddf ("dtc: create tool to diff device trees") Signed-off-by: Matthias Schiffer Reviewed-by: Frank Rowand Signed-off-by: Rob Herring Link: https://lore.kernel.org/r/20220113081918.10387-1-matthias.schiffer@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman commit c87126e4913d6b60de9f1f3611b8db1e1656a133 Author: Sergey Shtylyov Date: Thu Jan 13 22:46:07 2022 +0300 bcmgenet: add WOL IRQ check commit 9deb48b53e7f4056c2eaa2dc2ee3338df619e4f6 upstream. The driver neglects to check the result of platform_get_irq_optional()'s call and blithely passes the negative error codes to devm_request_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL. Stop calling devm_request_irq() with the invalid IRQ #s. Fixes: 8562056f267d ("net: bcmgenet: request Wake-on-LAN interrupt") Signed-off-by: Sergey Shtylyov Acked-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit af7c14aa08a8812bce9e1744a98635f2c6e04ddf Author: Kevin Bracey Date: Wed Jan 12 19:02:10 2022 +0200 net_sched: restore "mpu xxx" handling commit fb80445c438c78b40b547d12b8d56596ce4ccfeb upstream. commit 56b765b79e9a ("htb: improved accuracy at high rates") broke "overhead X", "linklayer atm" and "mpu X" attributes. "overhead X" and "linklayer atm" have already been fixed. This restores the "mpu X" handling, as might be used by DOCSIS or Ethernet shaping: tc class add ... htb rate X overhead 4 mpu 64 The code being fixed is used by htb, tbf and act_police. Cake has its own mpu handling. qdisc_calculate_pkt_len still uses the size table containing values adjusted for mpu by user space. iproute2 tc has always passed mpu into the kernel via a tc_ratespec structure, but the kernel never directly acted on it, merely stored it so that it could be read back by `tc class show`. Rather, tc would generate length-to-time tables that included the mpu (and linklayer) in their construction, and the kernel used those tables. Since v3.7, the tables were no longer used. Along with "mpu", this also broke "overhead" and "linklayer" which were fixed in 01cb71d2d47b ("net_sched: restore "overhead xxx" handling", v3.10) and 8a8e3d84b171 ("net_sched: restore "linklayer atm" handling", v3.11). "overhead" was fixed by simply restoring use of tc_ratespec::overhead - this had originally been used by the kernel but was initially omitted from the new non-table-based calculations. "linklayer" had been handled in the table like "mpu", but the mode was not originally passed in tc_ratespec. The new implementation was made to handle it by getting new versions of tc to pass the mode in an extended tc_ratespec, and for older versions of tc the table contents were analysed at load time to deduce linklayer. As "mpu" has always been given to the kernel in tc_ratespec, accompanying the mpu-based table, we can restore system functionality with no userspace change by making the kernel act on the tc_ratespec value. Fixes: 56b765b79e9a ("htb: improved accuracy at high rates") Signed-off-by: Kevin Bracey Cc: Eric Dumazet Cc: Jiri Pirko Cc: Vimalkumar Link: https://lore.kernel.org/r/20220112170210.1014351-1-kevin@bracey.fi Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 6ccf4bc9e26db2a43ba797525b38d855c40b8e1b Author: Tudor Ambarus Date: Wed Dec 15 13:01:13 2021 +0200 dmaengine: at_xdmac: Fix at_xdmac_lld struct definition commit 912f7c6f7fac273f40e621447cf17d14b50d6e5b upstream. The hardware channel next descriptor view structure contains just fields of 32 bits, while dma_addr_t can be of type u64 or u32 depending on CONFIG_ARCH_DMA_ADDR_T_64BIT. Force u32 to comply with what the hardware expects. Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Signed-off-by: Tudor Ambarus Link: https://lore.kernel.org/r/20211215110115.191749-11-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman commit a3d09c8d1f60a49d5c5b538b06f19d0874344fcc Author: Tudor Ambarus Date: Wed Dec 15 13:01:12 2021 +0200 dmaengine: at_xdmac: Fix lld view setting commit 1385eb4d14d447cc5d744bc2ac34f43be66c9963 upstream. AT_XDMAC_CNDC_NDVIEW_NDV3 was set even for AT_XDMAC_MBR_UBC_NDV2, because of the wrong bit handling. Fix it. Fixes: ee0fe35c8dcd ("dmaengine: xdmac: Handle descriptor's view 3 registers") Signed-off-by: Tudor Ambarus Link: https://lore.kernel.org/r/20211215110115.191749-10-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman commit 92b97861caafc32860baf89f111c085120e018c0 Author: Tudor Ambarus Date: Wed Dec 15 13:01:06 2021 +0200 dmaengine: at_xdmac: Print debug message after realeasing the lock commit 5edc24ac876a928f36f407a0fcdb33b94a3a210f upstream. It is desirable to do the prints without the lock held if possible, so move the print after the lock is released. Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Signed-off-by: Tudor Ambarus Link: https://lore.kernel.org/r/20211215110115.191749-4-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman commit 96a128f2167a1e68c89899b5cdae538e0d07e1ee Author: Tudor Ambarus Date: Wed Dec 15 13:01:04 2021 +0200 dmaengine: at_xdmac: Don't start transactions at tx_submit level commit bccfb96b59179d4f96cbbd1ddff8fac6d335eae4 upstream. tx_submit is supposed to push the current transaction descriptor to a pending queue, waiting for issue_pending() to be called. issue_pending() must start the transfer, not tx_submit(), thus remove at_xdmac_start_xfer() from at_xdmac_tx_submit(). Clients of at_xdmac that assume that tx_submit() starts the transfer must be updated and call dma_async_issue_pending() if they miss to call it (one example is atmel_serial). As the at_xdmac_start_xfer() is now called only from at_xdmac_advance_work() when !at_xdmac_chan_is_enabled(), the at_xdmac_chan_is_enabled() check is no longer needed in at_xdmac_start_xfer(), thus remove it. Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Signed-off-by: Tudor Ambarus Link: https://lore.kernel.org/r/20211215110115.191749-2-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman commit 93de8a63f6049e74465674db554a66c66b2d80e2 Author: Guillaume Nault Date: Mon Jan 10 14:43:11 2022 +0100 libcxgb: Don't accidentally set RTO_ONLINK in cxgb_find_route() commit a915deaa9abe4fb3a440312c954253a6a733608e upstream. Mask the ECN bits before calling ip_route_output_ports(). The tos variable might be passed directly from an IPv4 header, so it may have the last ECN bit set. This interferes with the route lookup process as ip_route_output_key_hash() interpretes this bit specially (to restrict the route scope). Found by code inspection, compile tested only. Fixes: 804c2f3e36ef ("libcxgb,iw_cxgb4,cxgbit: add cxgb_find_route()") Signed-off-by: Guillaume Nault Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit d27047379e949a26081ffe4a688aac65872778a4 Author: Eric Dumazet Date: Tue Jan 18 03:43:40 2022 -0800 netns: add schedule point in ops_exit_list() commit 2836615aa22de55b8fca5e32fe1b27a67cda625e upstream. When under stress, cleanup_net() can have to dismantle netns in big numbers. ops_exit_list() currently calls many helpers [1] that have no schedule point, and we can end up with soft lockups, particularly on hosts with many cpus. Even for moderate amount of netns processed by cleanup_net() this patch avoids latency spikes. [1] Some of these helpers like fib_sync_up() and fib_sync_down_dev() are very slow because net/ipv4/fib_semantics.c uses host-wide hash tables, and ifindex is used as the only input of two hash functions. ifindexes tend to be the same for all netns (lo.ifindex==1 per instance) This will be fixed in a separate patch. Fixes: 72ad937abd0a ("net: Add support for batching network namespace cleanups") Signed-off-by: Eric Dumazet Cc: Eric W. Biederman Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 766aa5f2387494c9e48a3575029034d037a67f96 Author: Robert Hancock Date: Tue Jan 18 15:41:30 2022 -0600 net: axienet: fix number of TX ring slots for available check commit aba57a823d2985a2cc8c74a2535f3a88e68d9424 upstream. The check for the number of available TX ring slots was off by 1 since a slot is required for the skb header as well as each fragment. This could result in overwriting a TX ring slot that was still in use. Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Robert Hancock Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit ff594e1b6f39f07f050759de2d27c36b7739c0c9 Author: Robert Hancock Date: Tue Jan 18 15:41:25 2022 -0600 net: axienet: Wait for PhyRstCmplt after core reset commit b400c2f4f4c53c86594dd57098970d97d488bfde upstream. When resetting the device, wait for the PhyRstCmplt bit to be set in the interrupt status register before continuing initialization, to ensure that the core is actually ready. When using an external PHY, this also ensures we do not start trying to access the PHY while it is still in reset. The PHY reset is initiated by the core reset which is triggered just above, but remains asserted for 5ms after the core is reset according to the documentation. The MgtRdy bit could also be waited for, but unfortunately when using 7-series devices, the bit does not appear to work as documented (it seems to behave as some sort of link state indication and not just an indication the transceiver is ready) so it can't really be relied on for this purpose. Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Robert Hancock Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit b2e606d4dce3dc8b1606d41533316144257bb6df Author: Eric Dumazet Date: Fri Jan 14 08:43:28 2022 -0800 af_unix: annote lockless accesses to unix_tot_inflight & gc_in_progress commit 9d6d7f1cb67cdee15f1a0e85aacfb924e0e02435 upstream. wait_for_unix_gc() reads unix_tot_inflight & gc_in_progress without synchronization. Adds READ_ONCE()/WRITE_ONCE() and their associated comments to better document the intent. BUG: KCSAN: data-race in unix_inflight / wait_for_unix_gc write to 0xffffffff86e2b7c0 of 4 bytes by task 9380 on cpu 0: unix_inflight+0x1e8/0x260 net/unix/scm.c:63 unix_attach_fds+0x10c/0x1e0 net/unix/scm.c:121 unix_scm_to_skb net/unix/af_unix.c:1674 [inline] unix_dgram_sendmsg+0x679/0x16b0 net/unix/af_unix.c:1817 unix_seqpacket_sendmsg+0xcc/0x110 net/unix/af_unix.c:2258 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg net/socket.c:724 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2409 ___sys_sendmsg net/socket.c:2463 [inline] __sys_sendmmsg+0x267/0x4c0 net/socket.c:2549 __do_sys_sendmmsg net/socket.c:2578 [inline] __se_sys_sendmmsg net/socket.c:2575 [inline] __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2575 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffffffff86e2b7c0 of 4 bytes by task 9375 on cpu 1: wait_for_unix_gc+0x24/0x160 net/unix/garbage.c:196 unix_dgram_sendmsg+0x8e/0x16b0 net/unix/af_unix.c:1772 unix_seqpacket_sendmsg+0xcc/0x110 net/unix/af_unix.c:2258 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg net/socket.c:724 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2409 ___sys_sendmsg net/socket.c:2463 [inline] __sys_sendmmsg+0x267/0x4c0 net/socket.c:2549 __do_sys_sendmmsg net/socket.c:2578 [inline] __se_sys_sendmmsg net/socket.c:2575 [inline] __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2575 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000002 -> 0x00000004 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 9375 Comm: syz-executor.1 Not tainted 5.16.0-rc7-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 9915672d4127 ("af_unix: limit unix_tot_inflight") Signed-off-by: Eric Dumazet Reported-by: syzbot Link: https://lore.kernel.org/r/20220114164328.2038499-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 95ae2679dd36a48fdd0b938eecea2ec9d67eabbd Author: Miaoqian Lin Date: Thu Jan 20 12:18:12 2022 +0000 parisc: pdc_stable: Fix memory leak in pdcs_register_pathentries commit d24846a4246b6e61ecbd036880a4adf61681d241 upstream. kobject_init_and_add() takes reference even when it fails. According to the doc of kobject_init_and_add()： If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Fix memory leak by calling kobject_put(). Fixes: 73f368cf679b ("Kobject: change drivers/parisc/pdc_stable.c to use kobject_init_and_add") Signed-off-by: Miaoqian Lin Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman commit 95ce6b99869eae207b4d8e5ebd2997c84381f48f Author: Tobias Waldekranz Date: Tue Jan 18 22:50:53 2022 +0100 net/fsl: xgmac_mdio: Fix incorrect iounmap when removing module commit 3f7c239c7844d2044ed399399d97a5f1c6008e1b upstream. As reported by sparse: In the remove path, the driver would attempt to unmap its own priv pointer - instead of the io memory that it mapped in probe. Fixes: 9f35a7342cff ("net/fsl: introduce Freescale 10G MDIO driver") Signed-off-by: Tobias Waldekranz Reviewed-by: Andrew Lunn Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 123b8c34533190f13f423d01514b80f73691fb2e Author: Tobias Waldekranz Date: Tue Jan 18 22:50:52 2022 +0100 powerpc/fsl/dts: Enable WA for erratum A-009885 on fman3l MDIO buses commit 0d375d610fa96524e2ee2b46830a46a7bfa92a9f upstream. This block is used in (at least) T1024 and T1040, including their variants like T1023 etc. Fixes: d55ad2967d89 ("powerpc/mpc85xx: Create dts components for the FSL QorIQ DPAA FMan") Signed-off-by: Tobias Waldekranz Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 7ac7fb3f87a899ee61e2c7a1324fa2e4d7e9d70f Author: Anders Roxell Date: Tue Dec 7 12:02:28 2021 +0100 powerpc/cell: Fix clang -Wimplicit-fallthrough warning commit e89257e28e844f5d1d39081bb901d9f1183a7705 upstream. Clang warns: arch/powerpc/platforms/cell/pervasive.c:81:2: error: unannotated fall-through between switch labels case SRR1_WAKEEE: ^ arch/powerpc/platforms/cell/pervasive.c:81:2: note: insert 'break;' to avoid fall-through case SRR1_WAKEEE: ^ break; 1 error generated. Clang is more pedantic than GCC, which does not warn when failing through to a case that is just break or return. Clang's version is more in line with the kernel's own stance in deprecated.rst. Add athe missing break to silence the warning. Fixes: 6e83985b0f6e ("powerpc/cbe: Do not process external or decremeter interrupts from sreset") Reported-by: Naresh Kamboju Signed-off-by: Anders Roxell Reviewed-by: Nathan Chancellor Reviewed-by: Arnd Bergmann Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20211207110228.698956-1-anders.roxell@linaro.org Signed-off-by: Greg Kroah-Hartman commit 6ba43e94d3e9c1ce499df7270493c2c7f819c854 Author: Chengguang Xu Date: Sat Dec 18 19:23:20 2021 +0800 RDMA/rxe: Fix a typo in opcode name commit 8d1cfb884e881efd69a3be4ef10772c71cb22216 upstream. There is a redundant ']' in the name of opcode IB_OPCODE_RC_SEND_MIDDLE, so just fix it. Fixes: 8700e3e7c485 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20211218112320.3558770-1-cgxu519@mykernel.net Signed-off-by: Chengguang Xu Acked-by: Zhu Yanjun Reviewed-by: Bob Pearson Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman commit 743a0aeb512e6423e06f80b1a5f140154053bc32 Author: Yixing Liu Date: Mon Dec 6 21:36:52 2021 +0800 RDMA/hns: Modify the mapping attribute of doorbell to device commit 39d5534b1302189c809e90641ffae8cbdc42a8fc upstream. It is more general for ARM device drivers to use the device attribute to map PCI BAR spaces. Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver") Link: https://lore.kernel.org/r/20211206133652.27476-1-liangwenpeng@huawei.com Signed-off-by: Yixing Liu Signed-off-by: Wenpeng Liang Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman commit 6529329fbeb827df1e0b8c463c30ead6c9231d6c Author: Lukas Bulwahn Date: Thu Dec 30 18:19:40 2021 +0100 Documentation: refer to config RANDOMIZE_BASE for kernel address-space randomization commit 82ca67321f55a8d1da6ac3ed611da3c32818bb37 upstream. The config RANDOMIZE_SLAB does not exist, the authors probably intended to refer to the config RANDOMIZE_BASE, which provides kernel address-space randomization. They probably just confused SLAB with BASE (these two four-letter words coincidentally share three common letters), as they also point out the config SLAB_FREELIST_RANDOM as further randomization within the same sentence. Fix the reference of the config for kernel address-space randomization to the config that provides that. Fixes: 6e88559470f5 ("Documentation: Add section about CPU vulnerabilities for Spectre") Signed-off-by: Lukas Bulwahn Link: https://lore.kernel.org/r/20211230171940.27558-1-lukas.bulwahn@gmail.com Signed-off-by: Jonathan Corbet Signed-off-by: Greg Kroah-Hartman commit 6ecb6a56d0b17886d8adf041c0c66d762953534b Author: Ben Hutchings Date: Mon Jun 18 23:55:40 2018 +0100 firmware: Update Kconfig help text for Google firmware commit d185a3466f0cd5af8f1c5c782c53bc0e6f2e7136 upstream. The help text for GOOGLE_FIRMWARE states that it should only be enabled when building a kernel for Google's own servers. However, many of the drivers dependent on it are also useful on Chromebooks or on any platform using coreboot. Update the help text to reflect this double duty. Fixes: d384d6f43d1e ("firmware: google memconsole: Add coreboot support") Reviewed-by: Julius Werner Signed-off-by: Ben Hutchings Link: https://lore.kernel.org/r/20180618225540.GD14131@decadent.org.uk Signed-off-by: Greg Kroah-Hartman commit 74052697cbe0e40273855ffce7ae09d786b9e914 Author: Christian König Date: Mon Jan 17 10:31:26 2022 +0100 drm/radeon: fix error handling in radeon_driver_open_kms commit 4722f463896cc0ef1a6f1c3cb2e171e949831249 upstream. The return value was never initialized so the cleanup code executed when it isn't even necessary. Just add proper error handling. Fixes: ab50cb9df889 ("drm/radeon/radeon_kms: Fix a NULL pointer dereference in radeon_driver_open_kms()") Signed-off-by: Christian König Tested-by: Jan Stancek Tested-by: Borislav Petkov Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman commit 735d2772c36fe23ddcdf1047abf46ee9242cdb73 Author: Marek Vasut Date: Mon Dec 20 20:50:22 2021 +0100 crypto: stm32/crc32 - Fix kernel BUG triggered in probe() commit 29009604ad4e3ef784fd9b9fef6f23610ddf633d upstream. The include/linux/crypto.h struct crypto_alg field cra_driver_name description states "Unique name of the transformation provider. " ... " this contains the name of the chip or provider and the name of the transformation algorithm." In case of the stm32-crc driver, field cra_driver_name is identical for all registered transformation providers and set to the name of the driver itself, which is incorrect. This patch fixes it by assigning a unique cra_driver_name to each registered transformation provider. The kernel crash is triggered when the driver calls crypto_register_shashes() which calls crypto_register_shash(), which calls crypto_register_alg(), which calls __crypto_register_alg(), which returns -EEXIST, which is propagated back through this call chain. Upon -EEXIST from crypto_register_shash(), the crypto_register_shashes() starts unregistering the providers back, and calls crypto_unregister_shash(), which calls crypto_unregister_alg(), and this is where the BUG() triggers due to incorrect cra_refcnt. Fixes: b51dbe90912a ("crypto: stm32 - Support for STM32 CRC32 crypto module") Signed-off-by: Marek Vasut Cc: # 4.12+ Cc: Alexandre Torgue Cc: Fabien Dessenne Cc: Herbert Xu Cc: Lionel Debieve Cc: Nicolas Toromanoff Cc: linux-arm-kernel@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-crypto@vger.kernel.org Acked-by: Nicolas Toromanoff Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit acd29971d6f46c2e29bedeb64d6f8cf39797f14c Author: Theodore Ts'o Date: Wed Jan 5 23:59:56 2022 -0500 ext4: don't use the orphan list when migrating an inode commit 6eeaf88fd586f05aaf1d48cb3a139d2a5c6eb055 upstream. We probably want to remove the indirect block to extents migration feature after a deprecation window, but until then, let's fix a potential data loss problem caused by the fact that we put the tmp_inode on the orphan list. In the unlikely case where we crash and do a journal recovery, the data blocks belonging to the inode being migrated are also represented in the tmp_inode on the orphan list --- and so its data blocks will get marked unallocated, and available for reuse. Instead, stop putting the tmp_inode on the oprhan list. So in the case where we crash while migrating the inode, we'll leak an inode, which is not a disaster. It will be easily fixed the next time we run fsck, and it's better than potentially having blocks getting claimed by two different files, and losing data as a result. Signed-off-by: Theodore Ts'o Reviewed-by: Lukas Czerner Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman commit 26a9eb40681d6de3cc83cac3a2d17959fbdcc80b Author: Ye Bin Date: Thu Dec 23 09:55:06 2021 +0800 ext4: Fix BUG_ON in ext4_bread when write quota data commit 380a0091cab482489e9b19e07f2a166ad2b76d5c upstream. We got issue as follows when run syzkaller: [ 167.936972] EXT4-fs error (device loop0): __ext4_remount:6314: comm rep: Abort forced by user [ 167.938306] EXT4-fs (loop0): Remounting filesystem read-only [ 167.981637] Assertion failure in ext4_getblk() at fs/ext4/inode.c:847: '(EXT4_SB(inode->i_sb)->s_mount_state & EXT4_FC_REPLAY) || handle != NULL || create == 0' [ 167.983601] ------------[ cut here ]------------ [ 167.984245] kernel BUG at fs/ext4/inode.c:847! [ 167.984882] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI [ 167.985624] CPU: 7 PID: 2290 Comm: rep Tainted: G B 5.16.0-rc5-next-20211217+ #123 [ 167.986823] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014 [ 167.988590] RIP: 0010:ext4_getblk+0x17e/0x504 [ 167.989189] Code: c6 01 74 28 49 c7 c0 a0 a3 5c 9b b9 4f 03 00 00 48 c7 c2 80 9c 5c 9b 48 c7 c6 40 b6 5c 9b 48 c7 c7 20 a4 5c 9b e8 77 e3 fd ff <0f> 0b 8b 04 244 [ 167.991679] RSP: 0018:ffff8881736f7398 EFLAGS: 00010282 [ 167.992385] RAX: 0000000000000094 RBX: 1ffff1102e6dee75 RCX: 0000000000000000 [ 167.993337] RDX: 0000000000000001 RSI: ffffffff9b6e29e0 RDI: ffffed102e6dee66 [ 167.994292] RBP: ffff88816a076210 R08: 0000000000000094 R09: ffffed107363fa09 [ 167.995252] R10: ffff88839b1fd047 R11: ffffed107363fa08 R12: ffff88816a0761e8 [ 167.996205] R13: 0000000000000000 R14: 0000000000000021 R15: 0000000000000001 [ 167.997158] FS: 00007f6a1428c740(0000) GS:ffff88839b000000(0000) knlGS:0000000000000000 [ 167.998238] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 167.999025] CR2: 00007f6a140716c8 CR3: 0000000133216000 CR4: 00000000000006e0 [ 167.999987] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 168.000944] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 168.001899] Call Trace: [ 168.002235] [ 168.007167] ext4_bread+0xd/0x53 [ 168.007612] ext4_quota_write+0x20c/0x5c0 [ 168.010457] write_blk+0x100/0x220 [ 168.010944] remove_free_dqentry+0x1c6/0x440 [ 168.011525] free_dqentry.isra.0+0x565/0x830 [ 168.012133] remove_tree+0x318/0x6d0 [ 168.014744] remove_tree+0x1eb/0x6d0 [ 168.017346] remove_tree+0x1eb/0x6d0 [ 168.019969] remove_tree+0x1eb/0x6d0 [ 168.022128] qtree_release_dquot+0x291/0x340 [ 168.023297] v2_release_dquot+0xce/0x120 [ 168.023847] dquot_release+0x197/0x3e0 [ 168.024358] ext4_release_dquot+0x22a/0x2d0 [ 168.024932] dqput.part.0+0x1c9/0x900 [ 168.025430] __dquot_drop+0x120/0x190 [ 168.025942] ext4_clear_inode+0x86/0x220 [ 168.026472] ext4_evict_inode+0x9e8/0xa22 [ 168.028200] evict+0x29e/0x4f0 [ 168.028625] dispose_list+0x102/0x1f0 [ 168.029148] evict_inodes+0x2c1/0x3e0 [ 168.030188] generic_shutdown_super+0xa4/0x3b0 [ 168.030817] kill_block_super+0x95/0xd0 [ 168.031360] deactivate_locked_super+0x85/0xd0 [ 168.031977] cleanup_mnt+0x2bc/0x480 [ 168.033062] task_work_run+0xd1/0x170 [ 168.033565] do_exit+0xa4f/0x2b50 [ 168.037155] do_group_exit+0xef/0x2d0 [ 168.037666] __x64_sys_exit_group+0x3a/0x50 [ 168.038237] do_syscall_64+0x3b/0x90 [ 168.038751] entry_SYSCALL_64_after_hwframe+0x44/0xae In order to reproduce this problem, the following conditions need to be met: 1. Ext4 filesystem with no journal; 2. Filesystem image with incorrect quota data; 3. Abort filesystem forced by user; 4. umount filesystem; As in ext4_quota_write: ... if (EXT4_SB(sb)->s_journal && !handle) { ext4_msg(sb, KERN_WARNING, "Quota write (off=%llu, len=%llu)" " cancelled because transaction is not started", (unsigned long long)off, (unsigned long long)len); return -EIO; } ... We only check handle if NULL when filesystem has journal. There is need check handle if NULL even when filesystem has no journal. Signed-off-by: Ye Bin Reviewed-by: Jan Kara Link: https://lore.kernel.org/r/20211223015506.297766-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman commit df63a7148c4287e9811fbcf7f5db6685b1d7bb1c Author: Luís Henriques Date: Tue Dec 14 17:50:58 2021 +0000 ext4: set csum seed in tmp inode while migrating to extents commit e81c9302a6c3c008f5c30beb73b38adb0170ff2d upstream. When migrating to extents, the temporary inode will have it's own checksum seed. This means that, when swapping the inodes data, the inode checksums will be incorrect. This can be fixed by recalculating the extents checksums again. Or simply by copying the seed into the temporary inode. Link: https://bugzilla.kernel.org/show_bug.cgi?id=213357 Reported-by: Jeroen van Wolffelaar Signed-off-by: Luís Henriques Link: https://lore.kernel.org/r/20211214175058.19511-1-lhenriques@suse.de Signed-off-by: Theodore Ts'o Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman commit 2113be378430ea84bafdff7491ccd3575e4bcb32 Author: Jan Kara Date: Thu Oct 7 17:53:35 2021 +0200 ext4: make sure quota gets properly shutdown on error commit 15fc69bbbbbc8c72e5f6cc4e1be0f51283c5448e upstream. When we hit an error when enabling quotas and setting inode flags, we do not properly shutdown quota subsystem despite returning error from Q_QUOTAON quotactl. This can lead to some odd situations like kernel using quota file while it is still writeable for userspace. Make sure we properly cleanup the quota subsystem in case of error. Signed-off-by: Jan Kara Cc: stable@kernel.org Link: https://lore.kernel.org/r/20211007155336.12493-2-jack@suse.cz Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman commit 7fbfe68aaea2ac30edf640a46e4a6e6c6ea483ba Author: Ilan Peer Date: Fri Dec 10 09:06:21 2021 +0200 iwlwifi: mvm: Increase the scan timeout guard to 30 seconds commit ced50f1133af12f7521bb777fcf4046ca908fb77 upstream. With the introduction of 6GHz channels the scan guard timeout should be adjusted to account for the following extreme case: - All 6GHz channels are scanned passively: 58 channels. - The scan is fragmented with the following parameters: 3 fragments, 95 TUs suspend time, 44 TUs maximal out of channel time. The above would result with scan time of more than 24 seconds. Thus, set the timeout to 30 seconds. Cc: stable@vger.kernel.org Signed-off-by: Ilan Peer Signed-off-by: Luca Coelho Link: https://lore.kernel.org/r/iwlwifi.20211210090244.3c851b93aef5.I346fa2e1d79220a6770496e773c6f87a2ad9e6c4@changeid Signed-off-by: Luca Coelho Signed-off-by: Greg Kroah-Hartman commit 50ee62f5fedcb708774e7ef9c3194388d1d2f209 Author: Andrey Ryabinin Date: Mon Nov 15 19:46:04 2021 +0300 cputime, cpuacct: Include guest time in user time in cpuacct.stat commit 9731698ecb9c851f353ce2496292ff9fcea39dff upstream. cpuacct.stat in no-root cgroups shows user time without guest time included int it. This doesn't match with user time shown in root cpuacct.stat and /proc//stat. This also affects cgroup2's cpu.stat in the same way. Make account_guest_time() to add user time to cgroup's cpustat to fix this. Fixes: ef12fefabf94 ("cpuacct: add per-cgroup utime/stime statistics") Signed-off-by: Andrey Ryabinin Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Daniel Jordan Acked-by: Tejun Heo Cc: Link: https://lore.kernel.org/r/20211115164607.23784-1-arbn@yandex-team.com Signed-off-by: Greg Kroah-Hartman commit 830c9ee8e43b5160ef8ea772d78922cc302d2f29 Author: Lukas Wunner Date: Sat Dec 18 10:58:56 2021 +0100 serial: Fix incorrect rs485 polarity on uart open commit d3b3404df318504ec084213ab1065b73f49b0f1d upstream. Commit a6845e1e1b78 ("serial: core: Consider rs485 settings to drive RTS") sought to deassert RTS when opening an rs485-enabled uart port. That way, the transceiver does not occupy the bus until it transmits data. Unfortunately, the commit mixed up the logic and *asserted* RTS instead of *deasserting* it: The commit amended uart_port_dtr_rts(), which raises DTR and RTS when opening an rs232 port. "Raising" actually means lowering the signal that's coming out of the uart, because an rs232 transceiver not only changes a signal's voltage level, it also *inverts* the signal. See the simplified schematic in the MAX232 datasheet for an example: https://www.ti.com/lit/ds/symlink/max232.pdf So, to raise RTS on an rs232 port, TIOCM_RTS is *set* in port->mctrl and that results in the signal being driven low. In contrast to rs232, the signal level for rs485 Transmit Enable is the identity, not the inversion: If the transceiver expects a "high" RTS signal for Transmit Enable, the signal coming out of the uart must also be high, so TIOCM_RTS must be *cleared* in port->mctrl. The commit did the exact opposite, but it's easy to see why given the confusing semantics of rs232 and rs485. Fix it. Fixes: a6845e1e1b78 ("serial: core: Consider rs485 settings to drive RTS") Cc: stable@vger.kernel.org # v4.14+ Cc: Rafael Gago Castano Cc: Jan Kiszka Cc: Su Bao Cheng Signed-off-by: Lukas Wunner Link: https://lore.kernel.org/r/9395767847833f2f3193c49cde38501eeb3b5669.1639821059.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman commit 5fba5c5d0ca33b5ab4a8166d4aed6ea7c4ee777e Author: Petr Cvachoucek Date: Mon Aug 30 21:20:37 2021 +0200 ubifs: Error path in ubifs_remount_rw() seems to wrongly free write buffers commit 3fea4d9d160186617ff40490ae01f4f4f36b28ff upstream. it seems freeing the write buffers in the error path of the ubifs_remount_rw() is wrong. It leads later to a kernel oops like this: [10016.431274] UBIFS (ubi0:0): start fixing up free space [10090.810042] UBIFS (ubi0:0): free space fixup complete [10090.814623] UBIFS error (ubi0:0 pid 512): ubifs_remount_fs: cannot spawn "ubifs_bgt0_0", error -4 [10101.915108] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 517 [10105.275498] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030 [10105.284352] Mem abort info: [10105.287160] ESR = 0x96000006 [10105.290252] EC = 0x25: DABT (current EL), IL = 32 bits [10105.295592] SET = 0, FnV = 0 [10105.298652] EA = 0, S1PTW = 0 [10105.301848] Data abort info: [10105.304723] ISV = 0, ISS = 0x00000006 [10105.308573] CM = 0, WnR = 0 [10105.311564] user pgtable: 4k pages, 48-bit VAs, pgdp=00000000f03d1000 [10105.318034] [0000000000000030] pgd=00000000f6cee003, pud=00000000f4884003, pmd=0000000000000000 [10105.326783] Internal error: Oops: 96000006 [#1] PREEMPT SMP [10105.332355] Modules linked in: ath10k_pci ath10k_core ath mac80211 libarc4 cfg80211 nvme nvme_core cryptodev(O) [10105.342468] CPU: 3 PID: 518 Comm: touch Tainted: G O 5.4.3 #1 [10105.349517] Hardware name: HYPEX CPU (DT) [10105.353525] pstate: 40000005 (nZcv daif -PAN -UAO) [10105.358324] pc : atomic64_try_cmpxchg_acquire.constprop.22+0x8/0x34 [10105.364596] lr : mutex_lock+0x1c/0x34 [10105.368253] sp : ffff000075633aa0 [10105.371563] x29: ffff000075633aa0 x28: 0000000000000001 [10105.376874] x27: ffff000076fa80c8 x26: 0000000000000004 [10105.382185] x25: 0000000000000030 x24: 0000000000000000 [10105.387495] x23: 0000000000000000 x22: 0000000000000038 [10105.392807] x21: 000000000000000c x20: ffff000076fa80c8 [10105.398119] x19: ffff000076fa8000 x18: 0000000000000000 [10105.403429] x17: 0000000000000000 x16: 0000000000000000 [10105.408741] x15: 0000000000000000 x14: fefefefefefefeff [10105.414052] x13: 0000000000000000 x12: 0000000000000fe0 [10105.419364] x11: 0000000000000fe0 x10: ffff000076709020 [10105.424675] x9 : 0000000000000000 x8 : 00000000000000a0 [10105.429986] x7 : ffff000076fa80f4 x6 : 0000000000000030 [10105.435297] x5 : 0000000000000000 x4 : 0000000000000000 [10105.440609] x3 : 0000000000000000 x2 : ffff00006f276040 [10105.445920] x1 : ffff000075633ab8 x0 : 0000000000000030 [10105.451232] Call trace: [10105.453676] atomic64_try_cmpxchg_acquire.constprop.22+0x8/0x34 [10105.459600] ubifs_garbage_collect+0xb4/0x334 [10105.463956] ubifs_budget_space+0x398/0x458 [10105.468139] ubifs_create+0x50/0x180 [10105.471712] path_openat+0x6a0/0x9b0 [10105.475284] do_filp_open+0x34/0x7c [10105.478771] do_sys_open+0x78/0xe4 [10105.482170] __arm64_sys_openat+0x1c/0x24 [10105.486180] el0_svc_handler+0x84/0xc8 [10105.489928] el0_svc+0x8/0xc [10105.492808] Code: 52800013 17fffffb d2800003 f9800011 (c85ffc05) [10105.498903] ---[ end trace 46b721d93267a586 ]--- To reproduce the problem: 1. Filesystem initially mounted read-only, free space fixup flag set. 2. mount -o remount,rw 3. it takes some time (free space fixup running) ... try to terminate running mount by CTRL-C ... does not respond, only after free space fixup is complete ... then "ubifs_remount_fs: cannot spawn "ubifs_bgt0_0", error -4" 4. mount -o remount,rw ... now finished instantly (fixup already done). 5. Create file or just unmount the filesystem and we get the oops. Cc: Fixes: b50b9f408502 ("UBIFS: do not free write-buffers when in R/O mode") Signed-off-by: Petr Cvachoucek Signed-off-by: Richard Weinberger Signed-off-by: Greg Kroah-Hartman commit a5eae259db3500d36db601e73a68abb7f7de1ad6 Author: Yauhen Kharuzhy Date: Sun Nov 7 23:20:01 2021 +0300 power: bq25890: Enable continuous conversion for ADC at charging [ Upstream commit 80211be1b9dec04cc2805d3d81e2091ecac289a1 ] Instead of one shot run of ADC at beginning of charging, run continuous conversion to ensure that all charging-related values are monitored properly (input voltage, input current, themperature etc.). Signed-off-by: Yauhen Kharuzhy Reviewed-by: Hans de Goede Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin commit 00d65478a0c4b28baf4506ed6415fd4f8fe01e56 Author: Tzung-Bi Shih Date: Fri Dec 24 14:47:16 2021 +0800 ASoC: mediatek: mt8173: fix device_node leak [ Upstream commit 493433785df0075afc0c106ab65f10a605d0b35d ] Fixes the device_node leak. Signed-off-by: Tzung-Bi Shih Link: https://lore.kernel.org/r/20211224064719.2031210-2-tzungbi@google.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit a38b8e81bb9069b41a53c2c99122d717aadc83db Author: Christoph Hellwig Date: Wed Dec 22 10:08:42 2021 +0100 scsi: sr: Don't use GFP_DMA [ Upstream commit d94d94969a4ba07a43d62429c60372320519c391 ] The allocated buffers are used as a command payload, for which the block layer and/or DMA API do the proper bounce buffering if needed. Link: https://lore.kernel.org/r/20211222090842.920724-1-hch@lst.de Reported-by: Baoquan He Reviewed-by: Baoquan He Signed-off-by: Christoph Hellwig Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit c091b0bb568b1f2205b9fa7caa13474e316f554c Author: Tianjia Zhang Date: Thu Dec 16 17:50:14 2021 +0800 MIPS: Octeon: Fix build errors using clang [ Upstream commit 95339b70677dc6f9a2d669c4716058e71b8dc1c7 ] A large number of the following errors is reported when compiling with clang: cvmx-bootinfo.h:326:3: error: adding 'int' to a string does not append to the string [-Werror,-Wstring-plus-int] ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_NULL) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cvmx-bootinfo.h:321:20: note: expanded from macro 'ENUM_BRD_TYPE_CASE' case x: return(#x + 16); /* Skip CVMX_BOARD_TYPE_ */ ~~~^~~~ cvmx-bootinfo.h:326:3: note: use array indexing to silence this warning cvmx-bootinfo.h:321:20: note: expanded from macro 'ENUM_BRD_TYPE_CASE' case x: return(#x + 16); /* Skip CVMX_BOARD_TYPE_ */ ^ Follow the prompts to use the address operator '&' to fix this error. Signed-off-by: Tianjia Zhang Reviewed-by: Nathan Chancellor Reviewed-by: Philippe Mathieu-Daudé Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin commit 9bd00e66b20f3f8e9df75b94af48e3e336cc4479 Author: Lakshmi Sowjanya D Date: Wed Dec 15 17:12:01 2021 +0200 i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters [ Upstream commit d52097010078c1844348dc0e467305e5f90fd317 ] The data type of hcnt and lcnt in the struct dw_i2c_dev is of type u16. It's better to have same data type in struct dw_scl_sda_cfg as well. Reported-by: Wolfram Sang Signed-off-by: Lakshmi Sowjanya D Signed-off-by: Andy Shevchenko Signed-off-by: Jarkko Nikula Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin commit 45ff29d49dc47ceb541f8253310429575ada7333 Author: Ye Guojin Date: Tue Nov 16 08:10:51 2021 +0000 MIPS: OCTEON: add put_device() after of_find_device_by_node() [ Upstream commit 858779df1c0787d3fec827fb705708df9ebdb15b ] This was found by coccicheck: ./arch/mips/cavium-octeon/octeon-platform.c, 332, 1-7, ERROR missing put_device; call of_find_device_by_node on line 324, but without a corresponding object release within this function. ./arch/mips/cavium-octeon/octeon-platform.c, 395, 1-7, ERROR missing put_device; call of_find_device_by_node on line 387, but without a corresponding object release within this function. ./arch/mips/cavium-octeon/octeon-usb.c, 512, 3-9, ERROR missing put_device; call of_find_device_by_node on line 515, but without a corresponding object release within this function. ./arch/mips/cavium-octeon/octeon-usb.c, 543, 1-7, ERROR missing put_device; call of_find_device_by_node on line 515, but without a corresponding object release within this function. Reported-by: Zeal Robot Signed-off-by: Ye Guojin Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin commit d8d4b1f7a2ecb1a5fb5d62cbd6667d117ac52572 Author: Takashi Iwai Date: Tue Dec 7 17:51:46 2021 +0100 ALSA: seq: Set upper limit of processed events [ Upstream commit 6fadb494a638d8b8a55864ecc6ac58194f03f327 ] Currently ALSA sequencer core tries to process the queued events as much as possible when they become dispatchable. If applications try to queue too massive events to be processed at the very same timing, the sequencer core would still try to process such all events, either in the interrupt context or via some notifier; in either away, it might be a cause of RCU stall or such problems. As a potential workaround for those problems, this patch adds the upper limit of the amount of events to be processed. The remaining events are processed in the next batch, so they won't be lost. For the time being, it's limited up to 1000 events per queue, which should be high enough for any normal usages. Reported-by: Zqiang Reported-by: syzbot+bb950e68b400ab4f65f8@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20211102033222.3849-1-qiang.zhang1211@gmail.com Link: https://lore.kernel.org/r/20211207165146.2888-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit c4f1a46d4660a1759c0ac01fe1f13be96f2dede3 Author: Christophe Leroy Date: Fri Nov 26 18:06:46 2021 +0100 w1: Misuse of get_user()/put_user() reported by sparse [ Upstream commit 33dc3e3e99e626ce51f462d883b05856c6c30b1d ] sparse warnings: (new ones prefixed by >>) >> drivers/w1/slaves/w1_ds28e04.c:342:13: sparse: sparse: incorrect type in initializer (different address spaces) @@ expected char [noderef] __user *_pu_addr @@ got char *buf @@ drivers/w1/slaves/w1_ds28e04.c:342:13: sparse: expected char [noderef] __user *_pu_addr drivers/w1/slaves/w1_ds28e04.c:342:13: sparse: got char *buf >> drivers/w1/slaves/w1_ds28e04.c:356:13: sparse: sparse: incorrect type in initializer (different address spaces) @@ expected char const [noderef] __user *_gu_addr @@ got char const *buf @@ drivers/w1/slaves/w1_ds28e04.c:356:13: sparse: expected char const [noderef] __user *_gu_addr drivers/w1/slaves/w1_ds28e04.c:356:13: sparse: got char const *buf The buffer buf is a failsafe buffer in kernel space, it's not user memory hence doesn't deserve the use of get_user() or put_user(). Access 'buf' content directly. Link: https://lore.kernel.org/lkml/202111190526.K5vb7NWC-lkp@intel.com/T/ Reported-by: kernel test robot Signed-off-by: Christophe Leroy Link: https://lore.kernel.org/r/d14ed8d71ad4372e6839ae427f91441d3ba0e94d.1637946316.git.christophe.leroy@csgroup.eu Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 69ee867860a018ffe4f6c7ed256bcf7369c602c8 Author: Joakim Tjernlund Date: Thu May 11 14:20:33 2017 +0200 i2c: mpc: Correct I2C reset procedure [ Upstream commit ebe82cf92cd4825c3029434cabfcd2f1780e64be ] Current I2C reset procedure is broken in two ways: 1) It only generate 1 START instead of 9 STARTs and STOP. 2) It leaves the bus Busy so every I2C xfer after the first fixup calls the reset routine again, for every xfer there after. This fixes both errors. Signed-off-by: Joakim Tjernlund Acked-by: Scott Wood Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin commit da1e7601b142ca67006d59fd3c902e0277e04488 Author: Michael Ellerman Date: Wed Nov 24 20:32:53 2021 +1100 powerpc/smp: Move setup_profiling_timer() under CONFIG_PROFILING [ Upstream commit a4ac0d249a5db80e79d573db9e4ad29354b643a8 ] setup_profiling_timer() is only needed when CONFIG_PROFILING is enabled. Fixes the following W=1 warning when CONFIG_PROFILING=n: linux/arch/powerpc/kernel/smp.c:1638:5: error: no previous prototype for ‘setup_profiling_timer’ Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20211124093254.1054750-5-mpe@ellerman.id.au Signed-off-by: Sasha Levin commit 202d0e22fe512df0f1cb6253d40ce1058e373247 Author: Heiner Kallweit Date: Sun Nov 7 22:57:00 2021 +0100 i2c: i801: Don't silently correct invalid transfer size [ Upstream commit effa453168a7eeb8a562ff4edc1dbf9067360a61 ] If an invalid block size is provided, reject it instead of silently changing it to a supported value. Especially critical I see the case of a write transfer with block length 0. In this case we have no guarantee that the byte we would write is valid. When silently reducing a read to 32 bytes then we don't return an error and the caller may falsely assume that we returned the full requested data. If this change should break any (broken) caller, then I think we should fix the caller. Signed-off-by: Heiner Kallweit Reviewed-by: Jean Delvare Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin commit bb0304a352c2ebee5ee140ad08910746add9bbd9 Author: Nicholas Piggin Date: Wed Nov 10 12:50:53 2021 +1000 powerpc/watchdog: Fix missed watchdog reset due to memory ordering race [ Upstream commit 5dad4ba68a2483fc80d70b9dc90bbe16e1f27263 ] It is possible for all CPUs to miss the pending cpumask becoming clear, and then nobody resetting it, which will cause the lockup detector to stop working. It will eventually expire, but watchdog_smp_panic will avoid doing anything if the pending mask is clear and it will never be reset. Order the cpumask clear vs the subsequent test to close this race. Add an extra check for an empty pending mask when the watchdog fires and finds its bit still clear, to try to catch any other possible races or bugs here and keep the watchdog working. The extra test in arch_touch_nmi_watchdog is required to prevent the new warning from firing off. Signed-off-by: Nicholas Piggin Reviewed-by: Laurent Dufour Debugged-by: Laurent Dufour Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20211110025056.2084347-2-npiggin@gmail.com Signed-off-by: Sasha Levin commit 69591d7f0414799f438830ffa4c6a94860c42062 Author: Julia Lawall Date: Fri Nov 20 20:33:23 2015 +0000 powerpc/btext: add missing of_node_put [ Upstream commit a1d2b210ffa52d60acabbf7b6af3ef7e1e69cda0 ] for_each_node_by_type performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // @@ local idexpression n; expression e; @@ for_each_node_by_type(n,...) { ... ( of_node_put(n); | e = n | + of_node_put(n); ? break; ) ... } ... when != n // Signed-off-by: Julia Lawall Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/1448051604-25256-6-git-send-email-Julia.Lawall@lip6.fr Signed-off-by: Sasha Levin commit 75169cbd75b53ad13bf138c50c3ed1ee50c3dba3 Author: Julia Lawall Date: Fri Nov 20 21:33:24 2015 +0100 powerpc/cell: add missing of_node_put [ Upstream commit a841fd009e51c8c0a8f07c942e9ab6bb48da8858 ] for_each_node_by_name performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // @@ expression e,e1; local idexpression n; @@ for_each_node_by_name(n, e1) { ... when != of_node_put(n) when != e = n ( return n; | + of_node_put(n); ? return ...; ) ... } // Signed-off-by: Julia Lawall Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/1448051604-25256-7-git-send-email-Julia.Lawall@lip6.fr Signed-off-by: Sasha Levin commit d3a141cdd596fcd720c0f4c979e84aadd7bd58c5 Author: Julia Lawall Date: Fri Nov 20 20:33:21 2015 +0000 powerpc/powernv: add missing of_node_put [ Upstream commit 7d405a939ca960162eb30c1475759cb2fdf38f8c ] for_each_compatible_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // @@ local idexpression n; expression e; @@ for_each_compatible_node(n,...) { ... ( of_node_put(n); | e = n | + of_node_put(n); ? break; ) ... } ... when != n // Signed-off-by: Julia Lawall Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/1448051604-25256-4-git-send-email-Julia.Lawall@lip6.fr Signed-off-by: Sasha Levin commit 0ae18b1efe4233806d8c3841b57184fb2130a726 Author: Julia Lawall Date: Fri Nov 20 20:33:19 2015 +0000 powerpc/6xx: add missing of_node_put [ Upstream commit f6e82647ff71d427d4148964b71f239fba9d7937 ] for_each_compatible_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // @@ expression e; local idexpression n; @@ @@ local idexpression n; expression e; @@ for_each_compatible_node(n,...) { ... ( of_node_put(n); | e = n | + of_node_put(n); ? break; ) ... } ... when != n // Signed-off-by: Julia Lawall Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/1448051604-25256-2-git-send-email-Julia.Lawall@lip6.fr Signed-off-by: Sasha Levin commit 99aa80c815e9fc1910e9e2368ef5a616f1a36d24 Author: John David Anglin Date: Wed Dec 22 16:52:26 2021 +0000 parisc: Avoid calling faulthandler_disabled() twice [ Upstream commit 9e9d4b460f23bab61672eae397417d03917d116c ] In handle_interruption(), we call faulthandler_disabled() to check whether the fault handler is not disabled. If the fault handler is disabled, we immediately call do_page_fault(). It then calls faulthandler_disabled(). If disabled, do_page_fault() attempts to fixup the exception by jumping to no_context: no_context: if (!user_mode(regs) && fixup_exception(regs)) { return; } parisc_terminate("Bad Address (null pointer deref?)", regs, code, address); Apart from the error messages, the two blocks of code perform the same function. We can avoid two calls to faulthandler_disabled() by a simple revision to the code in handle_interruption(). Note: I didn't try to fix the formatting of this code block. Signed-off-by: John David Anglin Signed-off-by: Helge Deller Signed-off-by: Sasha Levin commit 66a78d1de341aa32837699175e38ed879896e37b Author: Lukas Wunner Date: Sun Jan 2 18:52:44 2022 +0100 serial: core: Keep mctrl register state and cached copy in sync [ Upstream commit 93a770b7e16772530196674ffc79bb13fa927dc6 ] struct uart_port contains a cached copy of the Modem Control signals. It is used to skip register writes in uart_update_mctrl() if the new signal state equals the old signal state. It also avoids a register read to obtain the current state of output signals. When a uart_port is registered, uart_configure_port() changes signal state but neglects to keep the cached copy in sync. That may cause a subsequent register write to be incorrectly skipped. Fix it before it trips somebody up. This behavior has been present ever since the serial core was introduced in 2002: https://git.kernel.org/history/history/c/33c0d1b0c3eb So far it was never an issue because the cached copy is initialized to 0 by kzalloc() and when uart_configure_port() is executed, at most DTR has been set by uart_set_options() or sunsu_console_setup(). Therefore, a stable designation seems unnecessary. Signed-off-by: Lukas Wunner Link: https://lore.kernel.org/r/bceeaba030b028ed810272d55d5fc6f3656ddddb.1641129752.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit ed783500474e66e696e60bed366f5345afa6083c Author: Lukas Wunner Date: Sun Jan 2 18:42:44 2022 +0100 serial: pl010: Drop CR register reset on set_termios [ Upstream commit 08a0c6dff91c965e39905cf200d22db989203ccb ] pl010_set_termios() briefly resets the CR register to zero. Where does this register write come from? The PL010 driver's IRQ handler ambauart_int() originally modified the CR register without holding the port spinlock. ambauart_set_termios() also modified that register. To prevent concurrent read-modify-writes by the IRQ handler and to prevent transmission while changing baudrate, ambauart_set_termios() had to disable interrupts. That is achieved by writing zero to the CR register. However in 2004 the PL010 driver was amended to acquire the port spinlock in the IRQ handler, obviating the need to disable interrupts in ->set_termios(): https://git.kernel.org/history/history/c/157c0342e591 That rendered the CR register write obsolete. Drop it. Cc: Russell King Signed-off-by: Lukas Wunner Link: https://lore.kernel.org/r/fcaff16e5b1abb4cc3da5a2879ac13f278b99ed0.1641128728.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 9a4300a91ef8fe126a28c42311a0716e6919253f Author: Russell King (Oracle) Date: Tue Jan 4 16:38:19 2022 +0000 net: phy: marvell: configure RGMII delays for 88E1118 [ Upstream commit f22725c95ececb703c3f741e8f946d23705630b7 ] Corentin Labbe reports that the SSI 1328 does not work when allowing the PHY to operate at gigabit speeds, but does work with the generic PHY driver. This appears to be because m88e1118_config_init() writes a fixed value to the MSCR register, claiming that this is to enable 1G speeds. However, this always sets bits 4 and 5, enabling RGMII transmit and receive delays. The suspicion is that the original board this was added for required the delays to make 1G speeds work. Add the necessary configuration for RGMII delays for the 88E1118 to bring this into line with the requirements for RGMII support, and thus make the SSI 1328 work. Corentin Labbe has tested this on gemini-ssi1328 and gemini-ns2502. Reported-by: Corentin Labbe Tested-by: Corentin Labbe Signed-off-by: Russell King (Oracle) Reviewed-by: Andrew Lunn Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit cda3458337b94a60915f45835c6507bee6c4868e Author: Joe Thornber Date: Fri Dec 10 13:49:53 2021 +0000 dm space map common: add bounds check to sm_ll_lookup_bitmap() [ Upstream commit cba23ac158db7f3cd48a923d6861bee2eb7a2978 ] Corrupted metadata could warrant returning error from sm_ll_lookup_bitmap(). Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer Signed-off-by: Sasha Levin commit 74b16f895b47cce7b6a6d6830c8a41b51f3fa04f Author: Joe Thornber Date: Fri Dec 10 13:44:13 2021 +0000 dm btree: add a defensive bounds check to insert_at() [ Upstream commit 85bca3c05b6cca31625437eedf2060e846c4bbad ] Corrupt metadata could trigger an out of bounds write. Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer Signed-off-by: Sasha Levin commit eafd73401a692744b342cbf0e77a3d7d640be687 Author: Ping-Ke Shih Date: Mon Jan 3 09:36:21 2022 +0800 mac80211: allow non-standard VHT MCS-10/11 [ Upstream commit 04be6d337d37400ad5b3d5f27ca87645ee5a18a3 ] Some AP can possibly try non-standard VHT rate and mac80211 warns and drops packets, and leads low TCP throughput. Rate marked as a VHT rate but data is invalid: MCS: 10, NSS: 2 WARNING: CPU: 1 PID: 7817 at net/mac80211/rx.c:4856 ieee80211_rx_list+0x223/0x2f0 [mac8021 Since commit c27aa56a72b8 ("cfg80211: add VHT rate entries for MCS-10 and MCS-11") has added, mac80211 adds this support as well. After this patch, throughput is good and iw can get the bitrate: rx bitrate: 975.1 MBit/s VHT-MCS 10 80MHz short GI VHT-NSS 2 or rx bitrate: 1083.3 MBit/s VHT-MCS 11 80MHz short GI VHT-NSS 2 Buglink: https://bugzilla.suse.com/show_bug.cgi?id=1192891 Reported-by: Goldwyn Rodrigues Signed-off-by: Ping-Ke Shih Link: https://lore.kernel.org/r/20220103013623.17052-1-pkshih@realtek.com Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin commit c78017764c7d2c7b9ea42fd1aadd78f07b3ec403 Author: Florian Fainelli Date: Mon Jan 3 11:40:24 2022 -0800 net: mdio: Demote probed message to debug print [ Upstream commit 7590fc6f80ac2cbf23e6b42b668bbeded070850b ] On systems with large numbers of MDIO bus/muxes the message indicating that a given MDIO bus has been successfully probed is repeated for as many buses we have, which can eat up substantial boot time for no reason, demote to a debug print. Reported-by: Maxime Bizon Signed-off-by: Florian Fainelli Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20220103194024.2620-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit ddb2abdaa3b0fb99835129e4c7892b25fc7cc5a1 Author: Josef Bacik Date: Fri Nov 5 16:45:35 2021 -0400 btrfs: remove BUG_ON(!eie) in find_parent_nodes [ Upstream commit 9f05c09d6baef789726346397438cca4ec43c3ee ] If we're looking for leafs that point to a data extent we want to record the extent items that point at our bytenr. At this point we have the reference and we know for a fact that this leaf should have a reference to our bytenr. However if there's some sort of corruption we may not find any references to our leaf, and thus could end up with eie == NULL. Replace this BUG_ON() with an ASSERT() and then return -EUCLEAN for the mortals. Signed-off-by: Josef Bacik Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Sasha Levin commit a8dcf313882539edca8eb0f4043269de9c3722f0 Author: Josef Bacik Date: Fri Nov 5 16:45:34 2021 -0400 btrfs: remove BUG_ON() in find_parent_nodes() [ Upstream commit fcba0120edf88328524a4878d1d6f4ad39f2ec81 ] We search for an extent entry with .offset = -1, which shouldn't be a thing, but corruption happens. Add an ASSERT() for the developers, return -EUCLEAN for mortals. Signed-off-by: Josef Bacik Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Sasha Levin commit d015901589a3b96d670ffe04abec2fa085dfee3c Author: Kirill A. Shutemov Date: Wed Dec 22 17:33:51 2021 +0100 ACPICA: Hardware: Do not flush CPU cache when entering S4 and S5 [ Upstream commit 1d4e0b3abb168b2ee1eca99c527cffa1b80b6161 ] ACPICA commit 3dd7e1f3996456ef81bfe14cba29860e8d42949e According to ACPI 6.4, Section 16.2, the CPU cache flushing is required on entering to S1, S2, and S3, but the ACPICA code flushes the CPU cache regardless of the sleep state. Blind cache flush on entering S5 causes problems for TDX. Flushing happens with WBINVD that is not supported in the TDX environment. TDX only supports S5 and adjusting ACPICA code to conform to the spec more strictly fixes the issue. Link: https://github.com/acpica/acpica/commit/3dd7e1f3 Signed-off-by: Kirill A. Shutemov [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki Signed-off-by: Bob Moore Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin commit e8fdece02544a39b692f3bbb727bf445f2613df7 Author: Rafael J. Wysocki Date: Wed Dec 22 17:31:05 2021 +0100 ACPICA: Executer: Fix the REFCLASS_REFOF case in acpi_ex_opcode_1A_0T_1R() [ Upstream commit 24ea5f90ec9548044a6209685c5010edd66ffe8f ] ACPICA commit d984f12041392fa4156b52e2f7e5c5e7bc38ad9e If Operand[0] is a reference of the ACPI_REFCLASS_REFOF class, acpi_ex_opcode_1A_0T_1R () calls acpi_ns_get_attached_object () to obtain return_desc which may require additional resolution with the help of acpi_ex_read_data_from_field (). If the latter fails, the reference counter of the original return_desc is decremented which is incorrect, because acpi_ns_get_attached_object () does not increment the reference counter of the object returned by it. This issue may lead to premature deletion of the attached object while it is still attached and a use-after-free and crash in the host OS. For example, this may happen when on evaluation of ref_of() a local region field where there is no registered handler for the given Operation Region. Fix it by making acpi_ex_opcode_1A_0T_1R () return Status right away after a acpi_ex_read_data_from_field () failure. Link: https://github.com/acpica/acpica/commit/d984f120 Link: https://github.com/acpica/acpica/pull/685 Reported-by: Lenny Szubowicz Signed-off-by: Rafael J. Wysocki Signed-off-by: Bob Moore Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin commit 2e87cd46946027a81d2341eaf77eda2f09884395 Author: Rafael J. Wysocki Date: Wed Dec 22 17:29:45 2021 +0100 ACPICA: Utilities: Avoid deleting the same object twice in a row [ Upstream commit 1cdfe9e346b4c5509ffe19ccde880fd259d9f7a3 ] ACPICA commit c11af67d8f7e3d381068ce7771322f2b5324d687 If original_count is 0 in acpi_ut_update_ref_count (), acpi_ut_delete_internal_obj () is invoked for the target object, which is incorrect, because that object has been deleted once already and the memory allocated to store it may have been reclaimed and allocated for a different purpose by the host OS. Moreover, a confusing debug message following the "Reference Count is already zero, cannot decrement" warning is printed in that case. To fix this issue, make acpi_ut_update_ref_count () return after finding that original_count is 0 and printing the above warning. Link: https://github.com/acpica/acpica/commit/c11af67d Link: https://github.com/acpica/acpica/pull/652 Reported-by: Mark Asselstine Signed-off-by: Rafael J. Wysocki Signed-off-by: Bob Moore Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin commit 20f8c02cdcf7fa006008ad17fcc774ba700b5a75 Author: Mark Langsdorf Date: Wed Dec 22 16:57:34 2021 +0100 ACPICA: actypes.h: Expand the ACPI_ACCESS_ definitions [ Upstream commit f81bdeaf816142e0729eea0cc84c395ec9673151 ] ACPICA commit bc02c76d518135531483dfc276ed28b7ee632ce1 The current ACPI_ACCESS_*_WIDTH defines do not provide a way to test that size is small enough to not cause an overflow when applied to a 32-bit integer. Rather than adding more magic numbers, add ACPI_ACCESS_*_SHIFT, ACPI_ACCESS_*_MAX, and ACPI_ACCESS_*_DEFAULT #defines and redefine ACPI_ACCESS_*_WIDTH in terms of the new #defines. This was inititally reported on Linux where a size of 102 in ACPI_ACCESS_BIT_WIDTH caused an overflow error in the SPCR initialization code. Link: https://github.com/acpica/acpica/commit/bc02c76d Signed-off-by: Mark Langsdorf Signed-off-by: Bob Moore Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin commit 193753fffcca2a932328ce78069113d558fbeacc Author: Kyeong Yoo Date: Tue Jul 4 16:22:38 2017 +1200 jffs2: GC deadlock reading a page that is used in jffs2_write_begin() [ Upstream commit aa39cc675799bc92da153af9a13d6f969c348e82 ] GC task can deadlock in read_cache_page() because it may attempt to release a page that is actually allocated by another task in jffs2_write_begin(). The reason is that in jffs2_write_begin() there is a small window a cache page is allocated for use but not set Uptodate yet. This ends up with a deadlock between two tasks: 1) A task (e.g. file copy) - jffs2_write_begin() locks a cache page - jffs2_write_end() tries to lock "alloc_sem" from jffs2_reserve_space() <-- STUCK 2) GC task (jffs2_gcd_mtd3) - jffs2_garbage_collect_pass() locks "alloc_sem" - try to lock the same cache page in read_cache_page() <-- STUCK So to avoid this deadlock, hold "alloc_sem" in jffs2_write_begin() while reading data in a cache page. Signed-off-by: Kyeong Yoo Signed-off-by: Richard Weinberger Signed-off-by: Sasha Levin commit 2dfbcb55aeb308af6048b4348a4c8443b2f61492 Author: Randy Dunlap Date: Sun Sep 12 23:12:52 2021 -0700 um: registers: Rename function names to avoid conflicts and build problems [ Upstream commit 077b7320942b64b0da182aefd83c374462a65535 ] The function names init_registers() and restore_registers() are used in several net/ethernet/ and gpu/drm/ drivers for other purposes (not calls to UML functions), so rename them. This fixes multiple build errors. Signed-off-by: Randy Dunlap Cc: Jeff Dike Cc: Richard Weinberger Cc: Anton Ivanov Cc: linux-um@lists.infradead.org Signed-off-by: Richard Weinberger Signed-off-by: Sasha Levin commit 1b8b4167496cf77db15e55d54e32a42f0c983fc4 Author: Johannes Berg Date: Fri Dec 10 11:12:45 2021 +0200 iwlwifi: remove module loading failure message [ Upstream commit 6518f83ffa51131daaf439b66094f684da3fb0ae ] When CONFIG_DEBUG_TEST_DRIVER_REMOVE is set, iwlwifi crashes when the opmode module cannot be loaded, due to completing the completion before using drv->dev, which can then already be freed. Fix this by removing the (fairly useless) message. Moving the completion later causes a deadlock instead, so that's not an option. Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho Link: https://lore.kernel.org/r/20211210091245.289008-2-luca@coelho.fi Signed-off-by: Luca Coelho Signed-off-by: Sasha Levin commit 8e10749fa1a454c1e7214f36cec83241f5a36ef1 Author: Johannes Berg Date: Fri Dec 10 11:12:42 2021 +0200 iwlwifi: fix leaks/bad data after failed firmware load [ Upstream commit ab07506b0454bea606095951e19e72c282bfbb42 ] If firmware load fails after having loaded some parts of the firmware, e.g. the IML image, then this would leak. For the host command list we'd end up running into a WARN on the next attempt to load another firmware image. Fix this by calling iwl_dealloc_ucode() on failures, and make that also clear the data so we start fresh on the next round. Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho Link: https://lore.kernel.org/r/iwlwifi.20211210110539.1f742f0eb58a.I1315f22f6aa632d94ae2069f85e1bca5e734dce0@changeid Signed-off-by: Luca Coelho Signed-off-by: Sasha Levin commit 1d153d82e55f1cd2f32f5de72859a2608f05a0dc Author: Zekun Shen Date: Thu Oct 28 18:21:42 2021 -0400 ath9k: Fix out-of-bound memcpy in ath9k_hif_usb_rx_stream [ Upstream commit 6ce708f54cc8d73beca213cec66ede5ce100a781 ] Large pkt_len can lead to out-out-bound memcpy. Current ath9k_hif_usb_rx_stream allows combining the content of two urb inputs to one pkt. The first input can indicate the size of the pkt. Any remaining size is saved in hif_dev->rx_remain_len. While processing the next input, memcpy is used with rx_remain_len. 4-byte pkt_len can go up to 0xffff, while a single input is 0x4000 maximum in size (MAX_RX_BUF_SIZE). Thus, the patch adds a check for pkt_len which must not exceed 2 * MAX_RX_BUG_SIZE. BUG: KASAN: slab-out-of-bounds in ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc] Read of size 46393 at addr ffff888018798000 by task kworker/0:1/23 CPU: 0 PID: 23 Comm: kworker/0:1 Not tainted 5.6.0 #63 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014 Workqueue: events request_firmware_work_func Call Trace: dump_stack+0x76/0xa0 print_address_description.constprop.0+0x16/0x200 ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc] ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc] __kasan_report.cold+0x37/0x7c ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc] kasan_report+0xe/0x20 check_memory_region+0x15a/0x1d0 memcpy+0x20/0x50 ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc] ? hif_usb_mgmt_cb+0x2d9/0x2d9 [ath9k_htc] ? _raw_spin_lock_irqsave+0x7b/0xd0 ? _raw_spin_trylock_bh+0x120/0x120 ? __usb_unanchor_urb+0x12f/0x210 __usb_hcd_giveback_urb+0x1e4/0x380 usb_giveback_urb_bh+0x241/0x4f0 ? __hrtimer_run_queues+0x316/0x740 ? __usb_hcd_giveback_urb+0x380/0x380 tasklet_action_common.isra.0+0x135/0x330 __do_softirq+0x18c/0x634 irq_exit+0x114/0x140 smp_apic_timer_interrupt+0xde/0x380 apic_timer_interrupt+0xf/0x20 I found the bug using a custome USBFuzz port. It's a research work to fuzz USB stack/drivers. I modified it to fuzz ath9k driver only, providing hand-crafted usb descriptors to QEMU. After fixing the value of pkt_tag to ATH_USB_RX_STREAM_MODE_TAG in QEMU emulation, I found the KASAN report. The bug is triggerable whenever pkt_len is above two MAX_RX_BUG_SIZE. I used the same input that crashes to test the driver works when applying the patch. Signed-off-by: Zekun Shen Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/YXsidrRuK6zBJicZ@10-18-43-117.dynapool.wireless.nyu.edu Signed-off-by: Sasha Levin commit 90cefafe95fd80c75128ba201227cf2c31c64f82 Author: Kai-Heng Feng Date: Wed Dec 15 20:01:06 2021 +0800 usb: hub: Add delay for SuperSpeed hub resume to let links transit to U0 [ Upstream commit 00558586382891540c59c9febc671062425a6e47 ] When a new USB device gets plugged to nested hubs, the affected hub, which connects to usb 2-1.4-port2, doesn't report there's any change, hence the nested hubs go back to runtime suspend like nothing happened: [ 281.032951] usb usb2: usb wakeup-resume [ 281.032959] usb usb2: usb auto-resume [ 281.032974] hub 2-0:1.0: hub_resume [ 281.033011] usb usb2-port1: status 0263 change 0000 [ 281.033077] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000 [ 281.049797] usb 2-1: usb wakeup-resume [ 281.069800] usb 2-1: Waited 0ms for CONNECT [ 281.069810] usb 2-1: finish resume [ 281.070026] hub 2-1:1.0: hub_resume [ 281.070250] usb 2-1-port4: status 0203 change 0000 [ 281.070272] usb usb2-port1: resume, status 0 [ 281.070282] hub 2-1:1.0: state 7 ports 4 chg 0010 evt 0000 [ 281.089813] usb 2-1.4: usb wakeup-resume [ 281.109792] usb 2-1.4: Waited 0ms for CONNECT [ 281.109801] usb 2-1.4: finish resume [ 281.109991] hub 2-1.4:1.0: hub_resume [ 281.110147] usb 2-1.4-port2: status 0263 change 0000 [ 281.110234] usb 2-1-port4: resume, status 0 [ 281.110239] usb 2-1-port4: status 0203, change 0000, 10.0 Gb/s [ 281.110266] hub 2-1.4:1.0: state 7 ports 4 chg 0000 evt 0000 [ 281.110426] hub 2-1.4:1.0: hub_suspend [ 281.110565] usb 2-1.4: usb auto-suspend, wakeup 1 [ 281.130998] hub 2-1:1.0: hub_suspend [ 281.137788] usb 2-1: usb auto-suspend, wakeup 1 [ 281.142935] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000 [ 281.177828] usb 2-1: usb wakeup-resume [ 281.197839] usb 2-1: Waited 0ms for CONNECT [ 281.197850] usb 2-1: finish resume [ 281.197984] hub 2-1:1.0: hub_resume [ 281.198203] usb 2-1-port4: status 0203 change 0000 [ 281.198228] usb usb2-port1: resume, status 0 [ 281.198237] hub 2-1:1.0: state 7 ports 4 chg 0010 evt 0000 [ 281.217835] usb 2-1.4: usb wakeup-resume [ 281.237834] usb 2-1.4: Waited 0ms for CONNECT [ 281.237845] usb 2-1.4: finish resume [ 281.237990] hub 2-1.4:1.0: hub_resume [ 281.238067] usb 2-1.4-port2: status 0263 change 0000 [ 281.238148] usb 2-1-port4: resume, status 0 [ 281.238152] usb 2-1-port4: status 0203, change 0000, 10.0 Gb/s [ 281.238166] hub 2-1.4:1.0: state 7 ports 4 chg 0000 evt 0000 [ 281.238385] hub 2-1.4:1.0: hub_suspend [ 281.238523] usb 2-1.4: usb auto-suspend, wakeup 1 [ 281.258076] hub 2-1:1.0: hub_suspend [ 281.265744] usb 2-1: usb auto-suspend, wakeup 1 [ 281.285976] hub 2-0:1.0: hub_suspend [ 281.285988] usb usb2: bus auto-suspend, wakeup 1 USB 3.2 spec, 9.2.5.4 "Changing Function Suspend State" says that "If the link is in a non-U0 state, then the device must transition the link to U0 prior to sending the remote wake message", but the hub only transits the link to U0 after signaling remote wakeup. So be more forgiving and use a 20ms delay to let the link transit to U0 for remote wakeup. Suggested-by: Alan Stern Acked-by: Alan Stern Signed-off-by: Kai-Heng Feng Link: https://lore.kernel.org/r/20211215120108.336597-1-kai.heng.feng@canonical.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 0c5a680e9fa066a481de8efbf999afe560cf9a07 Author: Thierry Reding Date: Tue Dec 7 14:28:29 2021 +0100 arm64: tegra: Adjust length of CCPLEX cluster MMIO region [ Upstream commit 2b14cbd643feea5fc17c6e8bead4e71088c69acd ] The Tegra186 CCPLEX cluster register region is 4 MiB is length, not 4 MiB - 1. This was likely presumed to be the "limit" rather than length. Fix it up. Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin commit 171166700e6ce3b131c4890f91e3cd7d069f3109 Author: Ulf Hansson Date: Wed Nov 10 18:17:09 2021 +0100 mmc: core: Fixup storing of OCR for MMC_QUIRK_NONSTD_SDIO [ Upstream commit 8c3e5b74b9e2146f564905e50ca716591c76d4f1 ] The mmc core takes a specific path to support initializing of a non-standard SDIO card. This is triggered by looking for the card-quirk, MMC_QUIRK_NONSTD_SDIO. In mmc_sdio_init_card() this gets rather messy, as it causes the code to bail out earlier, compared to the usual path. This leads to that the OCR doesn't get saved properly in card->ocr. Fortunately, only omap_hsmmc has been using the MMC_QUIRK_NONSTD_SDIO and is dealing with the issue, by assigning a hardcoded value (0x80) to card->ocr from an ->init_card() ops. To make the behaviour consistent, let's instead rely on the core to save the OCR in card->ocr during initialization. Reported-by: H. Nikolaus Schaller Signed-off-by: Ulf Hansson Signed-off-by: H. Nikolaus Schaller Link: https://lore.kernel.org/r/e7936cff7fc24d187ef2680d3b4edb0ade58f293.1636564631.git.hns@goldelico.com Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin commit 17d0fb15a2841b8b77f6105165a63137103cc2e2 Author: Zhou Qingyang Date: Fri Dec 3 16:40:30 2021 +0100 media: saa7146: hexium_gemini: Fix a NULL pointer dereference in hexium_attach() [ Upstream commit 3af86b046933ba513d08399dba0d4d8b50d607d0 ] In hexium_attach(dev, info), saa7146_vv_init() is called to allocate a new memory for dev->vv_data. saa7146_vv_release() will be called on failure of saa7146_register_device(). There is a dereference of dev->vv_data in saa7146_vv_release(), which could lead to a NULL pointer dereference on failure of saa7146_vv_init(). Fix this bug by adding a check of saa7146_vv_init(). This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_VIDEO_HEXIUM_GEMINI=m show no new warnings, and our static analyzer no longer warns about this code. Link: https://lore.kernel.org/linux-media/20211203154030.111210-1-zhou1615@umn.edu Signed-off-by: Zhou Qingyang Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit 04f7a23c5ac9b74d54ba056773c63f0aa7b40ba5 Author: Sean Young Date: Tue Nov 30 23:58:19 2021 +0100 media: igorplugusb: receiver overflow should be reported [ Upstream commit 8fede658e7ddb605bbd68ed38067ddb0af033db4 ] Without this, some IR will be missing mid-stream and we might decode something which never really occurred. Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit 40674a53860b605843a8a1a7357d94c45542ff03 Author: Paolo Abeni Date: Tue Nov 30 11:08:06 2021 +0100 bpf: Do not WARN in bpf_warn_invalid_xdp_action() [ Upstream commit 2cbad989033bff0256675c38f96f5faab852af4b ] The WARN_ONCE() in bpf_warn_invalid_xdp_action() can be triggered by any bugged program, and even attaching a correct program to a NIC not supporting the given action. The resulting splat, beyond polluting the logs, fouls automated tools: e.g. a syzkaller reproducers using an XDP program returning an unsupported action will never pass validation. Replace the WARN_ONCE with a less intrusive pr_warn_once(). Signed-off-by: Paolo Abeni Signed-off-by: Daniel Borkmann Acked-by: Toke Høiland-Jørgensen Link: https://lore.kernel.org/bpf/016ceec56e4817ebb2a9e35ce794d5c917df572c.1638189075.git.pabeni@redhat.com Signed-off-by: Sasha Levin commit e2b3411acdd3c3adefcea2634c6c43eb7fc99689 Author: Suresh Kumar Date: Mon Dec 13 11:17:09 2021 +0530 net: bonding: debug: avoid printing debug logs when bond is not notifying peers [ Upstream commit fee32de284ac277ba434a2d59f8ce46528ff3946 ] Currently "bond_should_notify_peers: slave ..." messages are printed whenever "bond_should_notify_peers" function is called. +++ Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): Received LACPDU on port 1 Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): Rx Machine: Port=1, Last State=6, Curr State=6 Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): partner sync=1 Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 ... Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): Received LACPDU on port 2 Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): Rx Machine: Port=2, Last State=6, Curr State=6 Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): partner sync=1 Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 +++ This is confusing and can also clutter up debug logs. Print logs only when the peer notification happens. Signed-off-by: Suresh Kumar Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 8e7bb8e59e2d29f74e3c96954a9648411879434d Author: Sebastian Gottschall Date: Wed May 5 15:58:06 2021 +0700 ath10k: Fix tx hanging [ Upstream commit e8a91863eba3966a447d2daa1526082d52b5db2a ] While running stress tests in roaming scenarios (switching ap's every 5 seconds, we discovered a issue which leads to tx hangings of exactly 5 seconds while or after scanning for new accesspoints. We found out that this hanging is triggered by ath10k_mac_wait_tx_complete since the empty_tx_wq was not wake when the num_tx_pending counter reaches zero. To fix this, we simply move the wake_up call to htt_tx_dec_pending, since this call was missed on several locations within the ath10k code. Signed-off-by: Sebastian Gottschall Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20210505085806.11474-1-s.gottschall@dd-wrt.com Signed-off-by: Sasha Levin commit 1f0e4b7a5dbe30164e0193614b679fd0d88bf90e Author: Johannes Berg Date: Sat Dec 4 08:35:45 2021 +0200 iwlwifi: mvm: synchronize with FW after multicast commands [ Upstream commit db66abeea3aefed481391ecc564fb7b7fb31d742 ] If userspace installs a lot of multicast groups very quickly, then we may run out of command queue space as we send the updates in an asynchronous fashion (due to locking concerns), and the CPU can create them faster than the firmware can process them. This is true even when mac80211 has a work struct that gets scheduled. Fix this by synchronizing with the firmware after sending all those commands - outside of the iteration we can send a synchronous echo command that just has the effect of the CPU waiting for the prior asynchronous commands to finish. This also will cause fewer of the commands to be sent to the firmware overall, because the work will only run once when rescheduled multiple times while it's running. Link: https://bugzilla.kernel.org/show_bug.cgi?id=213649 Suggested-by: Emmanuel Grumbach Reported-by: Maximilian Ernestus Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho Link: https://lore.kernel.org/r/iwlwifi.20211204083238.51aea5b79ea4.I88a44798efda16e9fe480fb3e94224931d311b29@changeid Signed-off-by: Luca Coelho Signed-off-by: Sasha Levin commit 82ce3084892c0c0e006ec61f6144f2cc4e5ece88 Author: Mauro Carvalho Chehab Date: Mon Dec 6 15:34:19 2021 +0100 media: m920x: don't use stack on USB reads [ Upstream commit a2ab06d7c4d6bfd0b545a768247a70463e977e27 ] Using stack-allocated pointers for USB message data don't work. This driver is almost OK with that, except for the I2C read logic. Fix it by using a temporary read buffer, just like on all other calls to m920x_read(). Link: https://lore.kernel.org/all/ccc99e48-de4f-045e-0fe4-61e3118e3f74@mida.se/ Reported-by: rkardell@mida.se Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit 1552e475ebd2d79d1cdc348e39e4920c2517c3b0 Author: Zhou Qingyang Date: Tue Nov 30 17:25:49 2021 +0100 media: saa7146: hexium_orion: Fix a NULL pointer dereference in hexium_attach() [ Upstream commit 348df8035301dd212e3cc2860efe4c86cb0d3303 ] In hexium_attach(dev, info), saa7146_vv_init() is called to allocate a new memory for dev->vv_data. In hexium_detach(), saa7146_vv_release() will be called and there is a dereference of dev->vv_data in saa7146_vv_release(), which could lead to a NULL pointer dereference on failure of saa7146_vv_init() according to the following logic. Both hexium_attach() and hexium_detach() are callback functions of the variable 'extension', so there exists a possible call chain directly from hexium_attach() to hexium_detach(): hexium_attach(dev, info) -- fail to alloc memory to dev->vv_data | in saa7146_vv_init(). | | hexium_detach() -- a dereference of dev->vv_data in saa7146_vv_release() Fix this bug by adding a check of saa7146_vv_init(). This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_VIDEO_HEXIUM_ORION=m show no new warnings, and our static analyzer no longer warns about this code. Signed-off-by: Zhou Qingyang Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit bcfbcea2f917a94f186ffb78a1314c23d4ac6986 Author: James Hilliard Date: Sun Nov 14 09:52:36 2021 +0100 media: uvcvideo: Increase UVC_CTRL_CONTROL_TIMEOUT to 5 seconds. [ Upstream commit c8ed7d2f614cd8b315981d116c7a2fb01829500d ] Some uvc devices appear to require the maximum allowed USB timeout for GET_CUR/SET_CUR requests. So lets just bump the UVC control timeout to 5 seconds which is the same as the usb ctrl get/set defaults: USB_CTRL_GET_TIMEOUT 5000 USB_CTRL_SET_TIMEOUT 5000 It fixes the following runtime warnings: Failed to query (GET_CUR) UVC control 11 on unit 2: -110 (exp. 1). Failed to query (SET_CUR) UVC control 3 on unit 2: -110 (exp. 2). Signed-off-by: James Hilliard Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit 7f003c67fc036ba763ef2ec81167f12d75655255 Author: Xiongwei Song Date: Tue Nov 16 21:10:33 2021 +0800 floppy: Add max size check for user space request [ Upstream commit 545a32498c536ee152331cd2e7d2416aa0f20e01 ] We need to check the max request size that is from user space before allocating pages. If the request size exceeds the limit, return -EINVAL. This check can avoid the warning below from page allocator. WARNING: CPU: 3 PID: 16525 at mm/page_alloc.c:5344 current_gfp_context include/linux/sched/mm.h:195 [inline] WARNING: CPU: 3 PID: 16525 at mm/page_alloc.c:5344 __alloc_pages+0x45d/0x500 mm/page_alloc.c:5356 Modules linked in: CPU: 3 PID: 16525 Comm: syz-executor.3 Not tainted 5.15.0-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 RIP: 0010:__alloc_pages+0x45d/0x500 mm/page_alloc.c:5344 Code: be c9 00 00 00 48 c7 c7 20 4a 97 89 c6 05 62 32 a7 0b 01 e8 74 9a 42 07 e9 6a ff ff ff 0f 0b e9 a0 fd ff ff 40 80 e5 3f eb 88 <0f> 0b e9 18 ff ff ff 4c 89 ef 44 89 e6 45 31 ed e8 1e 76 ff ff e9 RSP: 0018:ffffc90023b87850 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 1ffff92004770f0b RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000033 RDI: 0000000000010cc1 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001 R10: ffffffff81bb4686 R11: 0000000000000001 R12: ffffffff902c1960 R13: 0000000000000033 R14: 0000000000000000 R15: ffff88804cf64a30 FS: 0000000000000000(0000) GS:ffff88802cd00000(0063) knlGS:00000000f44b4b40 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 000000002c921000 CR3: 000000004f507000 CR4: 0000000000150ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: alloc_pages+0x1a7/0x300 mm/mempolicy.c:2191 __get_free_pages+0x8/0x40 mm/page_alloc.c:5418 raw_cmd_copyin drivers/block/floppy.c:3113 [inline] raw_cmd_ioctl drivers/block/floppy.c:3160 [inline] fd_locked_ioctl+0x12e5/0x2820 drivers/block/floppy.c:3528 fd_ioctl drivers/block/floppy.c:3555 [inline] fd_compat_ioctl+0x891/0x1b60 drivers/block/floppy.c:3869 compat_blkdev_ioctl+0x3b8/0x810 block/ioctl.c:662 __do_compat_sys_ioctl+0x1c7/0x290 fs/ioctl.c:972 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178 do_fast_syscall_32+0x2f/0x70 arch/x86/entry/common.c:203 entry_SYSENTER_compat_after_hwframe+0x4d/0x5c Reported-by: syzbot+23a02c7df2cf2bc93fa2@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20211116131033.27685-1-sxwjean@me.com Signed-off-by: Xiongwei Song Signed-off-by: Denis Efremov Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit 3c752321c71f27e32533876c2681350bfd20bd13 Author: Neal Liu Date: Fri Nov 26 18:00:21 2021 +0800 usb: uhci: add aspeed ast2600 uhci support [ Upstream commit 554abfe2eadec97d12c71d4a69da1518478f69eb ] Enable ast2600 uhci quirks. Signed-off-by: Neal Liu Link: https://lore.kernel.org/r/20211126100021.2331024-1-neal_liu@aspeedtech.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 8c9261b84c9b90d130d97fc7d13727706253af87 Author: Zekun Shen Date: Sat Oct 30 22:42:50 2021 -0400 mwifiex: Fix skb_over_panic in mwifiex_usb_recv() [ Upstream commit 04d80663f67ccef893061b49ec8a42ff7045ae84 ] Currently, with an unknown recv_type, mwifiex_usb_recv just return -1 without restoring the skb. Next time mwifiex_usb_rx_complete is invoked with the same skb, calling skb_put causes skb_over_panic. The bug is triggerable with a compromised/malfunctioning usb device. After applying the patch, skb_over_panic no longer shows up with the same input. Attached is the panic report from fuzzing. skbuff: skb_over_panic: text:000000003bf1b5fa len:2048 put:4 head:00000000dd6a115b data:000000000a9445d8 tail:0x844 end:0x840 dev: kernel BUG at net/core/skbuff.c:109! invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 0 PID: 198 Comm: in:imklog Not tainted 5.6.0 #60 RIP: 0010:skb_panic+0x15f/0x161 Call Trace: ? mwifiex_usb_rx_complete+0x26b/0xfcd [mwifiex_usb] skb_put.cold+0x24/0x24 mwifiex_usb_rx_complete+0x26b/0xfcd [mwifiex_usb] __usb_hcd_giveback_urb+0x1e4/0x380 usb_giveback_urb_bh+0x241/0x4f0 ? __hrtimer_run_queues+0x316/0x740 ? __usb_hcd_giveback_urb+0x380/0x380 tasklet_action_common.isra.0+0x135/0x330 __do_softirq+0x18c/0x634 irq_exit+0x114/0x140 smp_apic_timer_interrupt+0xde/0x380 apic_timer_interrupt+0xf/0x20 Reported-by: Brendan Dolan-Gavitt Signed-off-by: Zekun Shen Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/YX4CqjfRcTa6bVL+@Zekuns-MBP-16.fios-router.home Signed-off-by: Sasha Levin commit 0d71b4d184c759af5f2d3eefb7fbb9bfd66b3191 Author: Chengfeng Ye Date: Fri Nov 5 06:45:07 2021 -0700 HSI: core: Fix return freed object in hsi_new_client [ Upstream commit a1ee1c08fcd5af03187dcd41dcab12fd5b379555 ] cl is freed on error of calling device_register, but this object is return later, which will cause uaf issue. Fix it by return NULL on error. Signed-off-by: Chengfeng Ye Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin commit 9e4b0e11d06c9562c97383d75cfa9d50c5c428ff Author: Hans de Goede Date: Thu Nov 25 21:30:10 2021 +0100 gpiolib: acpi: Do not set the IRQ type if the IRQ is already in use [ Upstream commit bdfd6ab8fdccd8b138837efff66f4a1911496378 ] If the IRQ is already in use, then acpi_dev_gpio_irq_get_by() really should not change the type underneath the current owner. I specifically hit an issue with this an a Chuwi Hi8 Super (CWI509) Bay Trail tablet, when the Boot OS selection in the BIOS is set to Android. In this case _STA for a MAX17047 ACPI I2C device wrongly returns 0xf and the _CRS resources for this device include a GpioInt pointing to a GPIO already in use by an _AEI handler, with a different type then specified in the _CRS for the MAX17047 device. Leading to the acpi_dev_gpio_irq_get() call done by the i2c-core-acpi.c code changing the type breaking the _AEI handler. Now this clearly is a bug in the DSDT of this tablet (in Android mode), but in general calling irq_set_irq_type() on an IRQ which already is in use seems like a bad idea. Signed-off-by: Hans de Goede Signed-off-by: Andy Shevchenko Signed-off-by: Sasha Levin commit 7649972d97fb98578fbc4a351416cf72895e7c4d Author: Martyn Welch Date: Thu Nov 25 10:53:02 2021 +0000 drm/bridge: megachips: Ensure both bridges are probed before registration [ Upstream commit 11632d4aa2b3f126790e81a4415d6c23103cf8bb ] In the configuration used by the b850v3, the STDP2690 is used to read EDID data whilst it's the STDP4028 which can detect when monitors are connected. This can result in problems at boot with monitors connected when the STDP4028 is probed first, a monitor is detected and an attempt is made to read the EDID data before the STDP2690 has probed: [ 3.795721] Unable to handle kernel NULL pointer dereference at virtual address 00000018 [ 3.803845] pgd = (ptrval) [ 3.806581] [00000018] *pgd=00000000 [ 3.810180] Internal error: Oops: 5 [#1] SMP ARM [ 3.814813] Modules linked in: [ 3.817879] CPU: 0 PID: 64 Comm: kworker/u4:1 Not tainted 5.15.0 #1 [ 3.824161] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 3.830705] Workqueue: events_unbound deferred_probe_work_func [ 3.836565] PC is at stdp2690_get_edid+0x44/0x19c [ 3.841286] LR is at ge_b850v3_lvds_get_modes+0x2c/0x5c [ 3.846526] pc : [<805eae10>] lr : [<805eb138>] psr: 80000013 [ 3.852802] sp : 81c359d0 ip : 7dbb550b fp : 81c35a1c [ 3.858037] r10: 81c73840 r9 : 81c73894 r8 : 816d9800 [ 3.863270] r7 : 00000000 r6 : 81c34000 r5 : 00000000 r4 : 810c35f0 [ 3.869808] r3 : 80e3e294 r2 : 00000080 r1 : 00000cc0 r0 : 81401180 [ 3.876349] Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 3.883499] Control: 10c5387d Table: 1000404a DAC: 00000051 [ 3.889254] Register r0 information: slab kmem_cache start 81401180 pointer offset 0 [ 3.897034] Register r1 information: non-paged memory [ 3.902097] Register r2 information: non-paged memory [ 3.907160] Register r3 information: non-slab/vmalloc memory [ 3.912832] Register r4 information: non-slab/vmalloc memory [ 3.918503] Register r5 information: NULL pointer [ 3.923217] Register r6 information: non-slab/vmalloc memory [ 3.928887] Register r7 information: NULL pointer [ 3.933601] Register r8 information: slab kmalloc-1k start 816d9800 pointer offset 0 size 1024 [ 3.942244] Register r9 information: slab kmalloc-2k start 81c73800 pointer offset 148 size 2048 [ 3.951058] Register r10 information: slab kmalloc-2k start 81c73800 pointer offset 64 size 2048 [ 3.959873] Register r11 information: non-slab/vmalloc memory [ 3.965632] Register r12 information: non-paged memory [ 3.970781] Process kworker/u4:1 (pid: 64, stack limit = 0x(ptrval)) [ 3.977148] Stack: (0x81c359d0 to 0x81c36000) [ 3.981517] 59c0: 80b2b668 80b2b5bc 000002e2 0000034e [ 3.989712] 59e0: 81c35a8c 816d98e8 81c35a14 7dbb550b 805bfcd0 810c35f0 81c73840 824addc0 [ 3.997906] 5a00: 00001000 816d9800 81c73894 81c73840 81c35a34 81c35a20 805eb138 805eadd8 [ 4.006099] 5a20: 810c35f0 00000045 81c35adc 81c35a38 80594188 805eb118 80d7c788 80dd1848 [ 4.014292] 5a40: 00000000 81c35a50 80dca950 811194d3 80dca7c4 80dca944 80dca91c 816d9800 [ 4.022485] 5a60: 81c34000 81c760a8 816d9800 80c58c98 810c35f0 816d98e8 00001000 00001000 [ 4.030678] 5a80: 00000000 00000000 8017712c 81c60000 00000002 00000001 00000000 00000000 [ 4.038870] 5aa0: 816d9900 816d9900 00000000 7dbb550b 805c700c 00000008 826282c8 826282c8 [ 4.047062] 5ac0: 00001000 81e1ce40 00001000 00000002 81c35bf4 81c35ae0 805d9694 80593fc0 [ 4.055255] 5ae0: 8017a970 80179ad8 00000179 00000000 81c35bcc 81c35b00 80177108 8017a950 [ 4.063447] 5b00: 00000000 81c35b10 81c34000 00000000 81004fd8 81010a38 00000000 00000059 [ 4.071639] 5b20: 816d98d4 81fbb718 00000013 826282c8 8017a940 81c35b40 81134448 00000400 [ 4.079831] 5b40: 00000178 00000000 e063b9c1 00000000 c2000049 00000040 00000000 00000008 [ 4.088024] 5b60: 82628300 82628380 00000000 00000000 81c34000 00000000 81fbb700 82628340 [ 4.096216] 5b80: 826283c0 00001000 00000000 00000010 816d9800 826282c0 801766f8 00000000 [ 4.104408] 5ba0: 00000000 81004fd8 00000049 00000000 00000000 00000001 80dcf940 80178de4 [ 4.112601] 5bc0: 81c35c0c 7dbb550b 80178de4 81fbb700 00000010 00000010 810c35f4 81e1ce40 [ 4.120793] 5be0: 81c40908 0000000c 81c35c64 81c35bf8 805a7f18 805d94a0 81c35c3c 816d9800 [ 4.128985] 5c00: 00000010 81c34000 81c35c2c 81c35c18 8012fce0 805be90c 81c35c3c 81c35c28 [ 4.137178] 5c20: 805be90c 80173210 81fbb600 81fbb6b4 81c35c5c 7dbb550b 81c35c64 81fbb700 [ 4.145370] 5c40: 816d9800 00000010 810c35f4 81e1ce40 81c40908 0000000c 81c35c84 81c35c68 [ 4.153565] 5c60: 805a8c78 805a7ed0 816d9800 81fbb700 00000010 00000000 81c35cac 81c35c88 [ 4.161758] 5c80: 805a8dc4 805a8b68 816d9800 00000000 816d9800 00000000 8179f810 810c42d0 [ 4.169950] 5ca0: 81c35ccc 81c35cb0 805e47b0 805a8d18 824aa240 81e1ea80 81c40908 81126b60 [ 4.178144] 5cc0: 81c35d14 81c35cd0 8060db1c 805e46cc 81c35d14 81c35ce0 80dd90f8 810c4d58 [ 4.186338] 5ce0: 80dd90dc 81fe9740 fffffffe 81fe9740 81e1ea80 00000000 810c4d6c 80c4b95c [ 4.194531] 5d00: 80dd9a3c 815c6810 81c35d34 81c35d18 8060dc9c 8060d8fc 8246b440 815c6800 [ 4.202724] 5d20: 815c6810 eefd8e00 81c35d44 81c35d38 8060dd80 8060dbec 81c35d6c 81c35d48 [ 4.210918] 5d40: 805e98a4 8060dd70 00000000 815c6810 810c45b0 81126e90 81126e90 80dd9a3c [ 4.219112] 5d60: 81c35d8c 81c35d70 80619574 805e9808 815c6810 00000000 810c45b0 81126e90 [ 4.227305] 5d80: 81c35db4 81c35d90 806168dc 80619514 80625df0 80623c80 815c6810 810c45b0 [ 4.235498] 5da0: 81c35e6c 815c6810 81c35dec 81c35db8 80616d04 80616800 81c35de4 81c35dc8 [ 4.243691] 5dc0: 808382b0 80b2f444 8116e310 8116e314 81c35e6c 815c6810 00000003 80dd9a3c [ 4.251884] 5de0: 81c35e14 81c35df0 80616ec8 80616c60 00000001 810c45b0 81c35e6c 815c6810 [ 4.260076] 5e00: 00000001 80dd9a3c 81c35e34 81c35e18 80617338 80616e90 00000000 81c35e6c [ 4.268269] 5e20: 80617284 81c34000 81c35e64 81c35e38 80614730 80617290 81c35e64 8171a06c [ 4.276461] 5e40: 81e220b8 7dbb550b 815c6810 81c34000 815c6854 81126e90 81c35e9c 81c35e68 [ 4.284654] 5e60: 8061673c 806146a8 8060f5e0 815c6810 00000001 7dbb550b 00000000 810c5080 [ 4.292847] 5e80: 810c5320 815c6810 81126e90 00000000 81c35eac 81c35ea0 80617554 80616650 [ 4.301040] 5ea0: 81c35ecc 81c35eb0 80615694 80617544 810c5080 810c5080 810c5094 81126e90 [ 4.309233] 5ec0: 81c35efc 81c35ed0 80615c6c 8061560c 80615bc0 810c50c0 817eeb00 81412800 [ 4.317425] 5ee0: 814c3000 00000000 814c300d 81119a60 81c35f3c 81c35f00 80141488 80615bcc [ 4.325618] 5f00: 81c60000 81c34000 81c35f24 81c35f18 80143078 817eeb00 81412800 817eeb18 [ 4.333811] 5f20: 81412818 81003d00 00000088 81412800 81c35f74 81c35f40 80141a48 80141298 [ 4.342005] 5f40: 81c35f74 81c34000 801481ac 817efa40 817efc00 801417d8 817eeb00 00000000 [ 4.350199] 5f60: 815a7e7c 81c34000 81c35fac 81c35f78 80149b1c 801417e4 817efc20 817efc20 [ 4.358391] 5f80: ffffe000 817efa40 801499a8 00000000 00000000 00000000 00000000 00000000 [ 4.366583] 5fa0: 00000000 81c35fb0 80100130 801499b4 00000000 00000000 00000000 00000000 [ 4.374774] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 4.382966] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 4.391155] Backtrace: [ 4.393613] [<805eadcc>] (stdp2690_get_edid) from [<805eb138>] (ge_b850v3_lvds_get_modes+0x2c/0x5c) [ 4.402691] r10:81c73840 r9:81c73894 r8:816d9800 r7:00001000 r6:824addc0 r5:81c73840 [ 4.410534] r4:810c35f0 [ 4.413073] [<805eb10c>] (ge_b850v3_lvds_get_modes) from [<80594188>] (drm_helper_probe_single_connector_modes+0x1d4/0x84c) [ 4.424240] r5:00000045 r4:810c35f0 [ 4.427822] [<80593fb4>] (drm_helper_probe_single_connector_modes) from [<805d9694>] (drm_client_modeset_probe+0x200/0x1384) [ 4.439074] r10:00000002 r9:00001000 r8:81e1ce40 r7:00001000 r6:826282c8 r5:826282c8 [ 4.446917] r4:00000008 [ 4.449455] [<805d9494>] (drm_client_modeset_probe) from [<805a7f18>] (__drm_fb_helper_initial_config_and_unlock+0x54/0x5b4) [ 4.460713] r10:0000000c r9:81c40908 r8:81e1ce40 r7:810c35f4 r6:00000010 r5:00000010 [ 4.468556] r4:81fbb700 [ 4.471095] [<805a7ec4>] (__drm_fb_helper_initial_config_and_unlock) from [<805a8c78>] (drm_fbdev_client_hotplug+0x11c/0x1b0) [ 4.482434] r10:0000000c r9:81c40908 r8:81e1ce40 r7:810c35f4 r6:00000010 r5:816d9800 [ 4.490276] r4:81fbb700 [ 4.492814] [<805a8b5c>] (drm_fbdev_client_hotplug) from [<805a8dc4>] (drm_fbdev_generic_setup+0xb8/0x1a4) [ 4.502494] r7:00000000 r6:00000010 r5:81fbb700 r4:816d9800 [ 4.508160] [<805a8d0c>] (drm_fbdev_generic_setup) from [<805e47b0>] (imx_drm_bind+0xf0/0x130) [ 4.516805] r7:810c42d0 r6:8179f810 r5:00000000 r4:816d9800 [ 4.522474] [<805e46c0>] (imx_drm_bind) from [<8060db1c>] (try_to_bring_up_master+0x22c/0x2f0) [ 4.531116] r7:81126b60 r6:81c40908 r5:81e1ea80 r4:824aa240 [ 4.536783] [<8060d8f0>] (try_to_bring_up_master) from [<8060dc9c>] (__component_add+0xbc/0x184) [ 4.545597] r10:815c6810 r9:80dd9a3c r8:80c4b95c r7:810c4d6c r6:00000000 r5:81e1ea80 [ 4.553440] r4:81fe9740 [ 4.555980] [<8060dbe0>] (__component_add) from [<8060dd80>] (component_add+0x1c/0x20) [ 4.563921] r7:eefd8e00 r6:815c6810 r5:815c6800 r4:8246b440 [ 4.569589] [<8060dd64>] (component_add) from [<805e98a4>] (dw_hdmi_imx_probe+0xa8/0xe8) [ 4.577702] [<805e97fc>] (dw_hdmi_imx_probe) from [<80619574>] (platform_probe+0x6c/0xc8) [ 4.585908] r9:80dd9a3c r8:81126e90 r7:81126e90 r6:810c45b0 r5:815c6810 r4:00000000 [ 4.593662] [<80619508>] (platform_probe) from [<806168dc>] (really_probe+0xe8/0x460) [ 4.601524] r7:81126e90 r6:810c45b0 r5:00000000 r4:815c6810 [ 4.607191] [<806167f4>] (really_probe) from [<80616d04>] (__driver_probe_device+0xb0/0x230) [ 4.615658] r7:815c6810 r6:81c35e6c r5:810c45b0 r4:815c6810 [ 4.621326] [<80616c54>] (__driver_probe_device) from [<80616ec8>] (driver_probe_device+0x44/0xe0) [ 4.630313] r9:80dd9a3c r8:00000003 r7:815c6810 r6:81c35e6c r5:8116e314 r4:8116e310 [ 4.638068] [<80616e84>] (driver_probe_device) from [<80617338>] (__device_attach_driver+0xb4/0x12c) [ 4.647227] r9:80dd9a3c r8:00000001 r7:815c6810 r6:81c35e6c r5:810c45b0 r4:00000001 [ 4.654981] [<80617284>] (__device_attach_driver) from [<80614730>] (bus_for_each_drv+0x94/0xd8) [ 4.663794] r7:81c34000 r6:80617284 r5:81c35e6c r4:00000000 [ 4.669461] [<8061469c>] (bus_for_each_drv) from [<8061673c>] (__device_attach+0xf8/0x190) [ 4.677753] r7:81126e90 r6:815c6854 r5:81c34000 r4:815c6810 [ 4.683419] [<80616644>] (__device_attach) from [<80617554>] (device_initial_probe+0x1c/0x20) [ 4.691971] r8:00000000 r7:81126e90 r6:815c6810 r5:810c5320 r4:810c5080 [ 4.698681] [<80617538>] (device_initial_probe) from [<80615694>] (bus_probe_device+0x94/0x9c) [ 4.707318] [<80615600>] (bus_probe_device) from [<80615c6c>] (deferred_probe_work_func+0xac/0xf0) [ 4.716305] r7:81126e90 r6:810c5094 r5:810c5080 r4:810c5080 [ 4.721973] [<80615bc0>] (deferred_probe_work_func) from [<80141488>] (process_one_work+0x1fc/0x54c) [ 4.731139] r10:81119a60 r9:814c300d r8:00000000 r7:814c3000 r6:81412800 r5:817eeb00 [ 4.738981] r4:810c50c0 r3:80615bc0 [ 4.742563] [<8014128c>] (process_one_work) from [<80141a48>] (worker_thread+0x270/0x570) [ 4.750765] r10:81412800 r9:00000088 r8:81003d00 r7:81412818 r6:817eeb18 r5:81412800 [ 4.758608] r4:817eeb00 [ 4.761147] [<801417d8>] (worker_thread) from [<80149b1c>] (kthread+0x174/0x190) [ 4.768574] r10:81c34000 r9:815a7e7c r8:00000000 r7:817eeb00 r6:801417d8 r5:817efc00 [ 4.776417] r4:817efa40 [ 4.778955] [<801499a8>] (kthread) from [<80100130>] (ret_from_fork+0x14/0x24) [ 4.786201] Exception stack(0x81c35fb0 to 0x81c35ff8) [ 4.791266] 5fa0: 00000000 00000000 00000000 00000000 [ 4.799459] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 4.807651] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 4.814279] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:801499a8 [ 4.822120] r4:817efa40 [ 4.824664] Code: e3a02080 e593001c e3a01d33 e3a05000 (e5979018) Split the registration from the STDP4028 probe routine and only perform registration once both the STDP4028 and STDP2690 have probed. Signed-off-by: Martyn Welch CC: Peter Senna Tschudin CC: Martyn Welch CC: Neil Armstrong CC: Robert Foss CC: Laurent Pinchart CC: Jonas Karlman CC: Jernej Skrabec Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/43552c3404e8fdf92d8bc5658fac24e9f03c2c57.1637836606.git.martyn.welch@collabora.com Signed-off-by: Sasha Levin commit 9d170a7ecb9edce9b520df76d001f856b47367e0 Author: Danielle Ratson Date: Tue Nov 23 09:54:47 2021 +0200 mlxsw: pci: Add shutdown method in PCI driver [ Upstream commit c1020d3cf4752f61a6a413f632ea2ce2370e150d ] On an arm64 platform with the Spectrum ASIC, after loading and executing a new kernel via kexec, the following trace [1] is observed. This seems to be caused by the fact that the device is not properly shutdown before executing the new kernel. Fix this by implementing a shutdown method which mirrors the remove method, as recommended by the kexec maintainer [2][3]. [1] BUG: Bad page state in process devlink pfn:22f73d page:fffffe00089dcf40 refcount:-1 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x2ffff00000000000() raw: 2ffff00000000000 0000000000000000 ffffffff089d0201 0000000000000000 raw: 0000000000000000 0000000000000000 ffffffffffffffff 0000000000000000 page dumped because: nonzero _refcount Modules linked in: CPU: 1 PID: 16346 Comm: devlink Tainted: G B 5.8.0-rc6-custom-273020-gac6b365b1bf5 #44 Hardware name: Marvell Armada 7040 TX4810M (DT) Call trace: dump_backtrace+0x0/0x1d0 show_stack+0x1c/0x28 dump_stack+0xbc/0x118 bad_page+0xcc/0xf8 check_free_page_bad+0x80/0x88 __free_pages_ok+0x3f8/0x418 __free_pages+0x38/0x60 kmem_freepages+0x200/0x2a8 slab_destroy+0x28/0x68 slabs_destroy+0x60/0x90 ___cache_free+0x1b4/0x358 kfree+0xc0/0x1d0 skb_free_head+0x2c/0x38 skb_release_data+0x110/0x1a0 skb_release_all+0x2c/0x38 consume_skb+0x38/0x130 __dev_kfree_skb_any+0x44/0x50 mlxsw_pci_rdq_fini+0x8c/0xb0 mlxsw_pci_queue_fini.isra.0+0x28/0x58 mlxsw_pci_queue_group_fini+0x58/0x88 mlxsw_pci_aqs_fini+0x2c/0x60 mlxsw_pci_fini+0x34/0x50 mlxsw_core_bus_device_unregister+0x104/0x1d0 mlxsw_devlink_core_bus_device_reload_down+0x2c/0x48 devlink_reload+0x44/0x158 devlink_nl_cmd_reload+0x270/0x290 genl_rcv_msg+0x188/0x2f0 netlink_rcv_skb+0x5c/0x118 genl_rcv+0x3c/0x50 netlink_unicast+0x1bc/0x278 netlink_sendmsg+0x194/0x390 __sys_sendto+0xe0/0x158 __arm64_sys_sendto+0x2c/0x38 el0_svc_common.constprop.0+0x70/0x168 do_el0_svc+0x28/0x88 el0_sync_handler+0x88/0x190 el0_sync+0x140/0x180 [2] https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1195432.html [3] https://patchwork.kernel.org/project/linux-scsi/patch/20170212214920.28866-1-anton@ozlabs.org/#20116693 Cc: Eric Biederman Signed-off-by: Danielle Ratson Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 2b1bdafcef74458c3b22ec0ebef0999113233619 Author: Zheyu Ma Date: Tue May 11 10:00:03 2021 +0100 media: b2c2: Add missing check in flexcop_pci_isr: [ Upstream commit b13203032e679674c7c518f52a7ec0801ca3a829 ] A out-of-bounds bug can be triggered by an interrupt, the reason for this bug is the lack of checking of register values. In flexcop_pci_isr, the driver reads value from a register and uses it as a dma address. Finally, this address will be passed to the count parameter of find_next_packet. If this value is larger than the size of dma, the index of buffer will be out-of-bounds. Fix this by adding a check after reading the value of the register. The following KASAN report reveals it: BUG: KASAN: slab-out-of-bounds in find_next_packet drivers/media/dvb-core/dvb_demux.c:528 [inline] BUG: KASAN: slab-out-of-bounds in _dvb_dmx_swfilter drivers/media/dvb-core/dvb_demux.c:572 [inline] BUG: KASAN: slab-out-of-bounds in dvb_dmx_swfilter+0x3fa/0x420 drivers/media/dvb-core/dvb_demux.c:603 Read of size 1 at addr ffff8880608c00a0 by task swapper/2/0 CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef #25 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xec/0x156 lib/dump_stack.c:118 print_address_description+0x78/0x290 mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report+0x25b/0x380 mm/kasan/report.c:412 __asan_report_load1_noabort+0x19/0x20 mm/kasan/report.c:430 find_next_packet drivers/media/dvb-core/dvb_demux.c:528 [inline] _dvb_dmx_swfilter drivers/media/dvb-core/dvb_demux.c:572 [inline] dvb_dmx_swfilter+0x3fa/0x420 drivers/media/dvb-core/dvb_demux.c:603 flexcop_pass_dmx_data+0x2e/0x40 drivers/media/common/b2c2/flexcop.c:167 flexcop_pci_isr+0x3d1/0x5d0 drivers/media/pci/b2c2/flexcop-pci.c:212 __handle_irq_event_percpu+0xfb/0x770 kernel/irq/handle.c:149 handle_irq_event_percpu+0x79/0x150 kernel/irq/handle.c:189 handle_irq_event+0xac/0x140 kernel/irq/handle.c:206 handle_fasteoi_irq+0x232/0x5c0 kernel/irq/chip.c:725 generic_handle_irq_desc include/linux/irqdesc.h:155 [inline] handle_irq+0x230/0x3a0 arch/x86/kernel/irq_64.c:87 do_IRQ+0xa7/0x1e0 arch/x86/kernel/irq.c:247 common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670 RIP: 0010:native_safe_halt+0x28/0x30 arch/x86/include/asm/irqflags.h:61 Code: 00 00 55 be 04 00 00 00 48 c7 c7 00 62 2f 8c 48 89 e5 e8 fb 31 e8 f8 8b 05 75 4f 8e 03 85 c0 7e 07 0f 00 2d 8a 61 66 00 fb f4 <5d> c3 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 RSP: 0018:ffff88806b71fcc8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde RAX: 0000000000000000 RBX: ffffffff8bde44c8 RCX: ffffffff88a11285 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff8c2f6200 RBP: ffff88806b71fcc8 R08: fffffbfff185ec40 R09: fffffbfff185ec40 R10: 0000000000000001 R11: fffffbfff185ec40 R12: 0000000000000002 R13: ffffffff8be9d6e0 R14: 0000000000000000 R15: 0000000000000000 arch_safe_halt arch/x86/include/asm/paravirt.h:94 [inline] default_idle+0x6f/0x360 arch/x86/kernel/process.c:557 arch_cpu_idle+0xf/0x20 arch/x86/kernel/process.c:548 default_idle_call+0x3b/0x60 kernel/sched/idle.c:93 cpuidle_idle_call kernel/sched/idle.c:153 [inline] do_idle+0x2ab/0x3c0 kernel/sched/idle.c:263 cpu_startup_entry+0xcb/0xe0 kernel/sched/idle.c:369 start_secondary+0x3b8/0x4e0 arch/x86/kernel/smpboot.c:271 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243 Allocated by task 1: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:553 kasan_slab_alloc+0x11/0x20 mm/kasan/kasan.c:490 slab_post_alloc_hook mm/slab.h:445 [inline] slab_alloc_node mm/slub.c:2741 [inline] slab_alloc mm/slub.c:2749 [inline] kmem_cache_alloc+0xeb/0x280 mm/slub.c:2754 kmem_cache_zalloc include/linux/slab.h:699 [inline] __kernfs_new_node+0xe2/0x6f0 fs/kernfs/dir.c:633 kernfs_new_node+0x9a/0x120 fs/kernfs/dir.c:693 __kernfs_create_file+0x5f/0x340 fs/kernfs/file.c:992 sysfs_add_file_mode_ns+0x22a/0x4e0 fs/sysfs/file.c:306 create_files fs/sysfs/group.c:63 [inline] internal_create_group+0x34e/0xc30 fs/sysfs/group.c:147 sysfs_create_group fs/sysfs/group.c:173 [inline] sysfs_create_groups+0x9c/0x140 fs/sysfs/group.c:200 driver_add_groups+0x3e/0x50 drivers/base/driver.c:129 bus_add_driver+0x3a5/0x790 drivers/base/bus.c:684 driver_register+0x1cd/0x410 drivers/base/driver.c:170 __pci_register_driver+0x197/0x200 drivers/pci/pci-driver.c:1411 cx88_audio_pci_driver_init+0x23/0x25 drivers/media/pci/cx88/cx88-alsa.c: 1017 do_one_initcall+0xe0/0x610 init/main.c:884 do_initcall_level init/main.c:952 [inline] do_initcalls init/main.c:960 [inline] do_basic_setup init/main.c:978 [inline] kernel_init_freeable+0x4d0/0x592 init/main.c:1145 kernel_init+0x18/0x190 init/main.c:1062 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:415 Freed by task 0: (stack is not available) The buggy address belongs to the object at ffff8880608c0000 which belongs to the cache kernfs_node_cache of size 160 The buggy address is located 0 bytes to the right of 160-byte region [ffff8880608c0000, ffff8880608c00a0) The buggy address belongs to the page: page:ffffea0001823000 count:1 mapcount:0 mapping:ffff88806bed1e00 index:0x0 compound_mapcount: 0 flags: 0x100000000008100(slab|head) raw: 0100000000008100 dead000000000100 dead000000000200 ffff88806bed1e00 raw: 0000000000000000 0000000000240024 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880608bff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8880608c0000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff8880608c0080: 00 00 00 00 fc fc fc fc fc fc fc fc 00 00 00 00 ^ ffff8880608c0100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8880608c0180: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00 ================================================================== Link: https://lore.kernel.org/linux-media/1620723603-30912-1-git-send-email-zheyuma97@gmail.com Reported-by: Zheyu Ma Signed-off-by: Zheyu Ma Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit b4303a22ee66080b5275943f6c770b2560a3e005 Author: José Expósito Date: Thu Nov 18 08:29:53 2021 +0100 HID: apple: Do not reset quirks when the Fn key is not found [ Upstream commit a5fe7864d8ada170f19cc47d176bf8260ffb4263 ] When a keyboard without a function key is detected, instead of removing all quirks, remove only the APPLE_HAS_FN quirk. Signed-off-by: José Expósito Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin commit e74a5b78c45ff97f41554c49115237954e5ea27e Author: Pavankumar Kondeti Date: Fri Nov 12 15:54:40 2021 +0530 usb: gadget: f_fs: Use stream_open() for endpoint files [ Upstream commit c76ef96fc00eb398c8fc836b0eb2f82bcc619dc7 ] Function fs endpoint file operations are synchronized via an interruptible mutex wait. However we see threads that do ep file operations concurrently are getting blocked for the mutex lock in __fdget_pos(). This is an uninterruptible wait and we see hung task warnings and kernel panic if hung_task_panic systcl is enabled if host does not send/receive the data for long time. The reason for threads getting blocked in __fdget_pos() is due to the file position protection introduced by the commit 9c225f2655e3 ("vfs: atomic f_pos accesses as per POSIX"). Since function fs endpoint files does not have the notion of the file position, switch to the stream mode. This will bypass the file position mutex and threads will be blocked in interruptible state for the function fs mutex. It should not affects user space as we are only changing the task state changes the task state from UNINTERRUPTIBLE to INTERRUPTIBLE while waiting for the USB transfers to be finished. However there is a slight change to the O_NONBLOCK behavior. Earlier threads that are using O_NONBLOCK are also getting blocked inside fdget_pos(). Now they reach to function fs and error code is returned. The non blocking behavior is actually honoured now. Reviewed-by: John Keeping Signed-off-by: Pavankumar Kondeti Link: https://lore.kernel.org/r/1636712682-1226-1-git-send-email-quic_pkondeti@quicinc.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit acef791cdbfae4110fd6ed35c64b80f558dc9099 Author: Ben Skeggs Date: Wed Feb 24 19:29:52 2021 +1000 drm/nouveau/pmu/gm200-: avoid touching PMU outside of DEVINIT/PREOS/ACR [ Upstream commit 1d2271d2fb85e54bfc9630a6c30ac0feb9ffb983 ] There have been reports of the WFI timing out on some boards, and a patch was proposed to just remove it. This stuff is rather fragile, and I believe the WFI might be needed with our FW prior to GM200. However, we probably should not be touching PMU during init on GPUs where we depend on NVIDIA FW, outside of limited circumstances, so this should be a somewhat safer change that achieves the desired result. Reported-by: Diego Viola Signed-off-by: Ben Skeggs Reviewed-by: Karol Herbst Signed-off-by: Karol Herbst Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10 Signed-off-by: Sasha Levin commit 105f110a3632c89cf19b2227dfb4f70cd10c9799 Author: Zekun Shen Date: Thu Oct 28 18:37:49 2021 -0400 ar5523: Fix null-ptr-deref with unexpected WDCMSG_TARGET_START reply [ Upstream commit ae80b6033834342601e99f74f6a62ff5092b1cee ] Unexpected WDCMSG_TARGET_START replay can lead to null-ptr-deref when ar->tx_cmd->odata is NULL. The patch adds a null check to prevent such case. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] ar5523_cmd+0x46a/0x581 [ar5523] ar5523_probe.cold+0x1b7/0x18da [ar5523] ? ar5523_cmd_rx_cb+0x7a0/0x7a0 [ar5523] ? __pm_runtime_set_status+0x54a/0x8f0 ? _raw_spin_trylock_bh+0x120/0x120 ? pm_runtime_barrier+0x220/0x220 ? __pm_runtime_resume+0xb1/0xf0 usb_probe_interface+0x25b/0x710 really_probe+0x209/0x5d0 driver_probe_device+0xc6/0x1b0 device_driver_attach+0xe2/0x120 I found the bug using a custome USBFuzz port. It's a research work to fuzz USB stack/drivers. I modified it to fuzz ath9k driver only, providing hand-crafted usb descriptors to QEMU. After fixing the code (fourth byte in usb packet) to WDCMSG_TARGET_START, I got the null-ptr-deref bug. I believe the bug is triggerable whenever cmd->odata is NULL. After patching, I tested with the same input and no longer see the KASAN report. This was NOT tested on a real device. Signed-off-by: Zekun Shen Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/YXsmPQ3awHFLuAj2@10-18-43-117.dynapool.wireless.nyu.edu Signed-off-by: Sasha Levin commit 71c9be2bea899fbfd3d1202091fed9d1ba587785 Author: Alexander Aring Date: Tue Nov 2 15:17:24 2021 -0400 fs: dlm: filter user dlm messages for kernel locks [ Upstream commit 6c2e3bf68f3e5e5a647aa52be246d5f552d7496d ] This patch fixes the following crash by receiving a invalid message: [ 160.672220] ================================================================== [ 160.676206] BUG: KASAN: user-memory-access in dlm_user_add_ast+0xc3/0x370 [ 160.679659] Read of size 8 at addr 00000000deadbeef by task kworker/u32:13/319 [ 160.681447] [ 160.681824] CPU: 10 PID: 319 Comm: kworker/u32:13 Not tainted 5.14.0-rc2+ #399 [ 160.683472] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.14.0-1.module+el8.6.0+12648+6ede71a5 04/01/2014 [ 160.685574] Workqueue: dlm_recv process_recv_sockets [ 160.686721] Call Trace: [ 160.687310] dump_stack_lvl+0x56/0x6f [ 160.688169] ? dlm_user_add_ast+0xc3/0x370 [ 160.689116] kasan_report.cold.14+0x116/0x11b [ 160.690138] ? dlm_user_add_ast+0xc3/0x370 [ 160.690832] dlm_user_add_ast+0xc3/0x370 [ 160.691502] _receive_unlock_reply+0x103/0x170 [ 160.692241] _receive_message+0x11df/0x1ec0 [ 160.692926] ? rcu_read_lock_sched_held+0xa1/0xd0 [ 160.693700] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 160.694427] ? lock_acquire+0x175/0x400 [ 160.695058] ? do_purge.isra.51+0x200/0x200 [ 160.695744] ? lock_acquired+0x360/0x5d0 [ 160.696400] ? lock_contended+0x6a0/0x6a0 [ 160.697055] ? lock_release+0x21d/0x5e0 [ 160.697686] ? lock_is_held_type+0xe0/0x110 [ 160.698352] ? lock_is_held_type+0xe0/0x110 [ 160.699026] ? ___might_sleep+0x1cc/0x1e0 [ 160.699698] ? dlm_wait_requestqueue+0x94/0x140 [ 160.700451] ? dlm_process_requestqueue+0x240/0x240 [ 160.701249] ? down_write_killable+0x2b0/0x2b0 [ 160.701988] ? do_raw_spin_unlock+0xa2/0x130 [ 160.702690] dlm_receive_buffer+0x1a5/0x210 [ 160.703385] dlm_process_incoming_buffer+0x726/0x9f0 [ 160.704210] receive_from_sock+0x1c0/0x3b0 [ 160.704886] ? dlm_tcp_shutdown+0x30/0x30 [ 160.705561] ? lock_acquire+0x175/0x400 [ 160.706197] ? rcu_read_lock_sched_held+0xa1/0xd0 [ 160.706941] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 160.707681] process_recv_sockets+0x32/0x40 [ 160.708366] process_one_work+0x55e/0xad0 [ 160.709045] ? pwq_dec_nr_in_flight+0x110/0x110 [ 160.709820] worker_thread+0x65/0x5e0 [ 160.710423] ? process_one_work+0xad0/0xad0 [ 160.711087] kthread+0x1ed/0x220 [ 160.711628] ? set_kthread_struct+0x80/0x80 [ 160.712314] ret_from_fork+0x22/0x30 The issue is that we received a DLM message for a user lock but the destination lock is a kernel lock. Note that the address which is trying to derefence is 00000000deadbeef, which is in a kernel lock lkb->lkb_astparam, this field should never be derefenced by the DLM kernel stack. In case of a user lock lkb->lkb_astparam is lkb->lkb_ua (memory is shared by a union field). The struct lkb_ua will be handled by the DLM kernel stack but on a kernel lock it will contain invalid data and ends in most likely crashing the kernel. It can be reproduced with two cluster nodes. node 2: dlm_tool join test echo "862 fooobaar 1 2 1" > /sys/kernel/debug/dlm/test_locks echo "862 3 1" > /sys/kernel/debug/dlm/test_waiters node 1: dlm_tool join test python: foo = DLM(h_cmd=3, o_nextcmd=1, h_nodeid=1, h_lockspace=0x77222027, \ m_type=7, m_flags=0x1, m_remid=0x862, m_result=0xFFFEFFFE) newFile = open("/sys/kernel/debug/dlm/comms/2/rawmsg", "wb") newFile.write(bytes(foo)) Signed-off-by: Alexander Aring Signed-off-by: David Teigland Signed-off-by: Sasha Levin commit 91c1a802d09bed451009d82336e1216e7f3adc84 Author: Wei Yongjun Date: Wed Oct 13 16:55:46 2021 +0800 Bluetooth: Fix debugfs entry leak in hci_register_dev() [ Upstream commit 5a4bb6a8e981d3d0d492aa38412ee80b21033177 ] Fault injection test report debugfs entry leak as follows: debugfs: Directory 'hci0' with parent 'bluetooth' already present! When register_pm_notifier() failed in hci_register_dev(), the debugfs create by debugfs_create_dir() do not removed in the error handing path. Add the remove debugfs code to fix it. Signed-off-by: Wei Yongjun Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin commit 001d3327cc77e85f3185fe0c1e793bba387fe2ab Author: Kamal Heib Date: Mon Dec 20 17:25:30 2021 +0200 RDMA/cxgb4: Set queue pair state when being queried [ Upstream commit e375b9c92985e409c4bb95dd43d34915ea7f5e28 ] The API for ib_query_qp requires the driver to set cur_qp_state on return, add the missing set. Fixes: 67bbc05512d8 ("RDMA/cxgb4: Add query_qp support") Link: https://lore.kernel.org/r/20211220152530.60399-1-kamalheib1@gmail.com Signed-off-by: Kamal Heib Reviewed-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin commit e1d6fe5cb221b542f66e156ebda991396c393fca Author: Randy Dunlap Date: Tue Dec 28 16:05:53 2021 -0800 mips: bcm63xx: add support for clk_set_parent() [ Upstream commit 6f03055d508ff4feb8db02ba3df9303a1db8d381 ] The MIPS BMC63XX subarch does not provide/support clk_set_parent(). This causes build errors in a few drivers, so add a simple implementation of that function so that callers of it will build without errors. Fixes these build errors: ERROR: modpost: "clk_set_parent" [sound/soc/jz4740/snd-soc-jz4740-i2s.ko] undefined! ERROR: modpost: "clk_set_parent" [sound/soc/atmel/snd-soc-atmel-i2s.ko] undefined! Fixes: e7300d04bd08 ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs." ) Signed-off-by: Randy Dunlap Reviewed-by: Jonathan Cameron Acked-by: Florian Fainelli Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin commit 11d7ec39c78a660c8fc821f00a858e629c26bed1 Author: Randy Dunlap Date: Tue Dec 28 16:03:45 2021 -0800 mips: lantiq: add support for clk_set_parent() [ Upstream commit 76f66dfd60dc5d2f9dec22d99091fea1035c5d03 ] Provide a simple implementation of clk_set_parent() in the lantiq subarch so that callers of it will build without errors. Fixes these build errors: ERROR: modpost: "clk_set_parent" [sound/soc/jz4740/snd-soc-jz4740-i2s.ko] undefined! ERROR: modpost: "clk_set_parent" [sound/soc/atmel/snd-soc-atmel-i2s.ko] undefined! Fixes: 171bb2f19ed6 ("MIPS: Lantiq: Add initial support for Lantiq SoCs") Signed-off-by: Randy Dunlap Reported-by: kernel test robot --to=linux-mips@vger.kernel.org --cc="John Crispin " --cc="Jonathan Cameron " --cc="Russell King " --cc="Andy Shevchenko " --cc=alsa-devel@alsa-project.org --to="Thomas Bogendoerfer " Reviewed-by: Jonathan Cameron Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin commit a39efff50c2efb843115ff5e94f0fb425f329b5e Author: Wei Yongjun Date: Tue Dec 28 12:55:22 2021 +0000 misc: lattice-ecp3-config: Fix task hung when firmware load failed [ Upstream commit fcee5ce50bdb21116711e38635e3865594af907e ] When firmware load failed, kernel report task hung as follows: INFO: task xrun:5191 blocked for more than 147 seconds. Tainted: G W 5.16.0-rc5-next-20211220+ #11 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:xrun state:D stack: 0 pid: 5191 ppid: 270 flags:0x00000004 Call Trace: __schedule+0xc12/0x4b50 kernel/sched/core.c:4986 schedule+0xd7/0x260 kernel/sched/core.c:6369 (discriminator 1) schedule_timeout+0x7aa/0xa80 kernel/time/timer.c:1857 wait_for_completion+0x181/0x290 kernel/sched/completion.c:85 lattice_ecp3_remove+0x32/0x40 drivers/misc/lattice-ecp3-config.c:221 spi_remove+0x72/0xb0 drivers/spi/spi.c:409 lattice_ecp3_remove() wait for signals from firmware loading, but when load failed, firmware_load() does not send this signal. This cause device remove hung. Fix it by sending signal even if load failed. Fixes: 781551df57c7 ("misc: Add Lattice ECP3 FPGA configuration via SPI") Reported-by: Hulk Robot Signed-off-by: Wei Yongjun Link: https://lore.kernel.org/r/20211228125522.3122284-1-weiyongjun1@huawei.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 279d7d97710feba23ed1bde3edc16542333996a5 Author: Jiasheng Jiang Date: Tue Dec 28 11:40:26 2021 +0800 ASoC: samsung: idma: Check of ioremap return value [ Upstream commit 3ecb46755eb85456b459a1a9f952c52986bce8ec ] Because of the potential failure of the ioremap(), the buf->area could be NULL. Therefore, we need to check it and return -ENOMEM in order to transfer the error. Fixes: f09aecd50f39 ("ASoC: SAMSUNG: Add I2S0 internal dma driver") Signed-off-by: Jiasheng Jiang Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20211228034026.1659385-1-jiasheng@iscas.ac.cn Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit cfcaff4bcb994d01021bd9950eb1b7f7d27544ba Author: Xiongfeng Wang Date: Fri Dec 17 15:30:55 2021 +0000 iommu/iova: Fix race between FQ timeout and teardown [ Upstream commit d7061627d701c90e1cac1e1e60c45292f64f3470 ] It turns out to be possible for hotplugging out a device to reach the stage of tearing down the device's group and default domain before the domain's flush queue has drained naturally. At this point, it is then possible for the timeout to expire just before the del_timer() call in free_iova_flush_queue(), such that we then proceed to free the FQ resources while fq_flush_timeout() is still accessing them on another CPU. Crashes due to this have been observed in the wild while removing NVMe devices. Close the race window by using del_timer_sync() to safely wait for any active timeout handler to finish before we start to free things. We already avoid any locking in free_iova_flush_queue() since the FQ is supposed to be inactive anyway, so the potential deadlock scenario does not apply. Fixes: 9a005a800ae8 ("iommu/iova: Add flush timer") Reviewed-by: John Garry Signed-off-by: Xiongfeng Wang [ rm: rewrite commit message ] Signed-off-by: Robin Murphy Link: https://lore.kernel.org/r/0a365e5b07f14b7344677ad6a9a734966a8422ce.1639753638.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel Signed-off-by: Sasha Levin commit 63cb12e2bd06d3ffc2e663bc56848e3716bb6505 Author: Arnd Bergmann Date: Mon Nov 22 23:21:58 2021 +0100 dmaengine: pxa/mmp: stop referencing config->slave_id [ Upstream commit 134c37fa250a87a7e77c80a7c59ae16c462e46e0 ] The last driver referencing the slave_id on Marvell PXA and MMP platforms was the SPI driver, but this stopped doing so a long time ago, so the TODO from the earlier patch can no be removed. Fixes: b729bf34535e ("spi/pxa2xx: Don't use slave_id of dma_slave_config") Fixes: 13b3006b8ebd ("dma: mmp_pdma: add filter function") Signed-off-by: Arnd Bergmann Acked-by: Mark Brown Link: https://lore.kernel.org/r/20211122222203.4103644-7-arnd@kernel.org Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin commit cb916e7da9a46779c174a0e1c3f5331c32373ce9 Author: Avihai Horon Date: Thu Dec 9 15:16:06 2021 +0200 RDMA/core: Let ib_find_gid() continue search even after empty entry [ Upstream commit 483d805191a23191f8294bbf9b4e94836f5d92e4 ] Currently, ib_find_gid() will stop searching after encountering the first empty GID table entry. This behavior is wrong since neither IB nor RoCE spec enforce tightly packed GID tables. For example, when a valid GID entry exists at index N, and if a GID entry is empty at index N-1, ib_find_gid() will fail to find the valid entry. Fix it by making ib_find_gid() continue searching even after encountering missing entries. Fixes: 5eb620c81ce3 ("IB/core: Add helpers for uncached GID and P_Key searches") Link: https://lore.kernel.org/r/e55d331b96cecfc2cf19803d16e7109ea966882d.1639055490.git.leonro@nvidia.com Signed-off-by: Avihai Horon Reviewed-by: Mark Zhang Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin commit 002e94a721a90886dc4c5632a6338be2e8d8bfb2 Author: Bart Van Assche Date: Fri Dec 3 15:19:39 2021 -0800 scsi: ufs: Fix race conditions related to driver data [ Upstream commit 21ad0e49085deb22c094f91f9da57319a97188e4 ] The driver data pointer must be set before any callbacks are registered that use that pointer. Hence move the initialization of that pointer from after the ufshcd_init() call to inside ufshcd_init(). Link: https://lore.kernel.org/r/20211203231950.193369-7-bvanassche@acm.org Fixes: 3b1d05807a9a ("[SCSI] ufs: Segregate PCI Specific Code") Reported-by: Alexey Dobriyan Tested-by: Bean Huo Reviewed-by: Bean Huo Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit c1b0ab208e542a36fe376ce0c5676e23be2aa59d Author: Kees Cook Date: Fri Dec 3 00:42:06 2021 -0800 char/mwave: Adjust io port register size [ Upstream commit f5912cc19acd7c24b2dbf65a6340bf194244f085 ] Using MKWORD() on a byte-sized variable results in OOB read. Expand the size of the reserved area so both MKWORD and MKBYTE continue to work without overflow. Silences this warning on a -Warray-bounds build: drivers/char/mwave/3780i.h:346:22: error: array subscript 'short unsigned int[0]' is partly outside array bounds of 'DSP_ISA_SLAVE_CONTROL[1]' [-Werror=array-bounds] 346 | #define MKWORD(var) (*((unsigned short *)(&var))) | ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/char/mwave/3780i.h:356:40: note: in definition of macro 'OutWordDsp' 356 | #define OutWordDsp(index,value) outw(value,usDspBaseIO+index) | ^~~~~ drivers/char/mwave/3780i.c:373:41: note: in expansion of macro 'MKWORD' 373 | OutWordDsp(DSP_IsaSlaveControl, MKWORD(rSlaveControl)); | ^~~~~~ drivers/char/mwave/3780i.c:358:31: note: while referencing 'rSlaveControl' 358 | DSP_ISA_SLAVE_CONTROL rSlaveControl; | ^~~~~~~~~~~~~ Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kees Cook Link: https://lore.kernel.org/r/20211203084206.3104326-1-keescook@chromium.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 9a5ec0d1a4123aad53eb261c7712c63a6f30db08 Author: Bixuan Cui Date: Wed Dec 1 16:58:54 2021 +0800 ALSA: oss: fix compile error when OSS_DEBUG is enabled [ Upstream commit 8e7daf318d97f25e18b2fc7eb5909e34cd903575 ] Fix compile error when OSS_DEBUG is enabled: sound/core/oss/pcm_oss.c: In function 'snd_pcm_oss_set_trigger': sound/core/oss/pcm_oss.c:2055:10: error: 'substream' undeclared (first use in this function); did you mean 'csubstream'? pcm_dbg(substream->pcm, "pcm_oss: trigger = 0x%x\n", trigger); ^ Fixes: 61efcee8608c ("ALSA: oss: Use standard printk helpers") Signed-off-by: Bixuan Cui Link: https://lore.kernel.org/r/1638349134-110369-1-git-send-email-cuibixuan@linux.alibaba.com Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit b2655590dcdd9863972149446e6e31dc14c0ad7c Author: Peiwei Hu Date: Fri Nov 19 17:12:18 2021 +0800 powerpc/prom_init: Fix improper check of prom_getprop() [ Upstream commit 869fb7e5aecbc163003f93f36dcc26d0554319f6 ] prom_getprop() can return PROM_ERROR. Binary operator can not identify it. Fixes: 94d2dde738a5 ("[POWERPC] Efika: prune fixups and make them more carefull") Signed-off-by: Peiwei Hu Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/tencent_BA28CC6897B7C95A92EB8C580B5D18589105@qq.com Signed-off-by: Sasha Levin commit 3407ffb35c696b57d6e5f4a34cca52893a2f3798 Author: Kamal Heib Date: Wed Nov 17 16:59:54 2021 +0200 RDMA/hns: Validate the pkey index [ Upstream commit 2a67fcfa0db6b4075515bd23497750849b88850f ] Before query pkey, make sure that the queried index is valid. Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver") Link: https://lore.kernel.org/r/20211117145954.123893-1-kamalheib1@gmail.com Signed-off-by: Kamal Heib Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin commit 492feaef41d4ae1f6c72f239c39bb7aba70a8493 Author: Takashi Iwai Date: Tue Nov 16 08:13:14 2021 +0100 ALSA: hda: Add missing rwsem around snd_ctl_remove() calls [ Upstream commit 80bd64af75b4bb11c0329bc66c35da2ddfb66d88 ] snd_ctl_remove() has to be called with card->controls_rwsem held (when called after the card instantiation). This patch add the missing rwsem calls around it. Fixes: d13bd412dce2 ("ALSA: hda - Manage kcontrol lists") Link: https://lore.kernel.org/r/20211116071314.15065-3-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit 64c5b9de1a0cb5f8bc5b05f58c44e956030dad86 Author: Takashi Iwai Date: Tue Nov 16 08:13:13 2021 +0100 ALSA: PCM: Add missing rwsem around snd_ctl_remove() calls [ Upstream commit 5471e9762e1af4b7df057a96bfd46cc250979b88 ] snd_ctl_remove() has to be called with card->controls_rwsem held (when called after the card instantiation). This patch add the missing rwsem calls around it. Fixes: a8ff48cb7083 ("ALSA: pcm: Free chmap at PCM free callback, too") Link: https://lore.kernel.org/r/20211116071314.15065-2-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit 9df0662aa5c5969eabaf46b2505ce3b3be00fc0f Author: Takashi Iwai Date: Tue Nov 16 08:13:12 2021 +0100 ALSA: jack: Add missing rwsem around snd_ctl_remove() calls [ Upstream commit 06764dc931848c3a9bc01a63bbf76a605408bb54 ] snd_ctl_remove() has to be called with card->controls_rwsem held (when called after the card instantiation). This patch add the missing rwsem calls around it. Fixes: 9058cbe1eed2 ("ALSA: jack: implement kctl creating for jack devices") Link: https://lore.kernel.org/r/20211116071314.15065-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit 462711ea99c69a0f47b0876936ddc6eb56ad6ed8 Author: Jan Kara Date: Fri Nov 12 16:22:02 2021 +0100 ext4: avoid trim error on fs with small groups [ Upstream commit 173b6e383d2a204c9921ffc1eca3b87aa2106c33 ] A user reported FITRIM ioctl failing for him on ext4 on some devices without apparent reason. After some debugging we've found out that these devices (being LVM volumes) report rather large discard granularity of 42MB and the filesystem had 1k blocksize and thus group size of 8MB. Because ext4 FITRIM implementation puts discard granularity into minlen, ext4_trim_fs() declared the trim request as invalid. However just silently doing nothing seems to be a more appropriate reaction to such combination of parameters since user did not specify anything wrong. CC: Lukas Czerner Fixes: 5c2ed62fd447 ("ext4: Adjust minlen with discard_granularity in the FITRIM ioctl") Signed-off-by: Jan Kara Link: https://lore.kernel.org/r/20211112152202.26614-1-jack@suse.cz Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin commit beb4b1243c6f7a5d59545fe6a01a8e0bf43d5012 Author: Pavel Skripkin Date: Fri Jan 7 01:57:16 2022 +0300 net: mcs7830: handle usb read errors properly [ Upstream commit d668769eb9c52b150753f1653f7f5a0aeb8239d2 ] Syzbot reported uninit value in mcs7830_bind(). The problem was in missing validation check for bytes read via usbnet_read_cmd(). usbnet_read_cmd() internally calls usb_control_msg(), that returns number of bytes read. Code should validate that requested number of bytes was actually read. So, this patch adds missing size validation check inside mcs7830_get_reg() to prevent uninit value bugs Reported-and-tested-by: syzbot+003c0a286b9af5412510@syzkaller.appspotmail.com Fixes: 2a36d7083438 ("USB: driver for mcs7830 (aka DeLOCK) USB ethernet adapter") Signed-off-by: Pavel Skripkin Reviewed-by: Arnd Bergmann Link: https://lore.kernel.org/r/20220106225716.7425-1-paskripkin@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 27b76fc08e963f79d780e2f38dcf5f57ddba1084 Author: Dominik Brodowski Date: Sun Jan 9 10:02:51 2022 +0100 pcmcia: fix setting of kthread task states [ Upstream commit fbb3485f1f931102d8ba606f1c28123f5b48afa3 ] We need to set TASK_INTERRUPTIBLE before calling kthread_should_stop(). Otherwise, kthread_stop() might see that the pccardd thread is still in TASK_RUNNING state and fail to wake it up. Additionally, we only need to set the state back to TASK_RUNNING if kthread_should_stop() breaks the loop. Cc: Greg Kroah-Hartman Reported-by: Al Viro Reviewed-by: Matthew Wilcox (Oracle) Fixes: d3046ba809ce ("pcmcia: fix a boot time warning in pcmcia cs code") Signed-off-by: Dominik Brodowski Signed-off-by: Sasha Levin commit b4fb7d6db198bc5f1acdc5972670273eb07cd7b9 Author: Jiasheng Jiang Date: Fri Dec 24 10:13:24 2021 +0800 can: xilinx_can: xcan_probe(): check for error irq [ Upstream commit c6564c13dae25cd7f8e1de5127b4da4500ee5844 ] For the possible failure of the platform_get_irq(), the returned irq could be error number and will finally cause the failure of the request_irq(). Consider that platform_get_irq() can now in certain cases return -EPROBE_DEFER, and the consequences of letting request_irq() effectively convert that into -EINVAL, even at probe time rather than later on. So it might be better to check just now. Fixes: b1201e44f50b ("can: xilinx CAN controller support") Link: https://lore.kernel.org/all/20211224021324.1447494-1-jiasheng@iscas.ac.cn Signed-off-by: Jiasheng Jiang Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin commit cb802e214e372bd8df50706cc828e5137d8c3f7a Author: Marc Kleine-Budde Date: Sat Jan 8 21:57:51 2022 +0100 can: softing: softing_startstop(): fix set but not used variable warning [ Upstream commit 370d988cc529598ebaec6487d4f84c2115dc696b ] In the function softing_startstop() the variable error_reporting is assigned but not used. The code that uses this variable is commented out. Its stated that the functionality is not finally verified. To fix the warning: | drivers/net/can/softing/softing_fw.c:424:9: error: variable 'error_reporting' set but not used [-Werror,-Wunused-but-set-variable] remove the comment, activate the code, but add a "0 &&" to the if expression and rely on the optimizer rather than the preprocessor to remove the code. Link: https://lore.kernel.org/all/20220109103126.1872833-1-mkl@pengutronix.de Fixes: 03fd3cf5a179 ("can: add driver for Softing card") Cc: Kurt Van Dijck Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin commit f54e3054b9713967f95b7a3c142c899fe82b6356 Author: Chen Jun Date: Wed Oct 13 06:25:56 2021 +0000 tpm: add request_locality before write TPM_INT_ENABLE [ Upstream commit 0ef333f5ba7f24f5d8478425c163d3097f1c7afd ] Locality is not appropriately requested before writing the int mask. Add the missing boilerplate. Fixes: e6aef069b6e9 ("tpm_tis: convert to using locality callbacks") Signed-off-by: Chen Jun Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Sasha Levin commit 9a3cece86b2d22f8d354bae09f743896d8403175 Author: Miaoqian Lin Date: Fri Jan 7 07:54:24 2022 +0000 spi: spi-meson-spifc: Add missing pm_runtime_disable() in meson_spifc_probe [ Upstream commit 69c1b87516e327a60b39f96b778fe683259408bf ] If the probe fails, we should use pm_runtime_disable() to balance pm_runtime_enable(). Add missing pm_runtime_disable() for meson_spifc_probe. Fixes: c3e4bc5434d2 ("spi: meson: Add support for Amlogic Meson SPIFC") Signed-off-by: Miaoqian Lin Link: https://lore.kernel.org/r/20220107075424.7774-1-linmq006@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 7eb361b0dcc89e8707b3b767ccd9a48859ecea9c Author: Jiasheng Jiang Date: Thu Jan 6 18:04:10 2022 +0800 fsl/fman: Check for null pointer after calling devm_ioremap [ Upstream commit d5a73ec96cc57cf67e51b12820fc2354e7ca46f8 ] As the possible failure of the allocation, the devm_ioremap() may return NULL pointer. Take tgec_initialization() as an example. If allocation fails, the params->base_addr will be NULL pointer and will be assigned to tgec->regs in tgec_config(). Then it will cause the dereference of NULL pointer in set_mac_address(), which is called by tgec_init(). Therefore, it should be better to add the sanity check after the calling of the devm_ioremap(). Fixes: 3933961682a3 ("fsl/fman: Add FMan MAC driver") Signed-off-by: Jiasheng Jiang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit f377b3a9618f53a6701fd48589c43e73169b60b9 Author: Eric Dumazet Date: Wed Jan 5 03:48:42 2022 -0800 ppp: ensure minimum packet size in ppp_write() [ Upstream commit 44073187990d5629804ce0627525f6ea5cfef171 ] It seems pretty clear ppp layer assumed user space would always be kind to provide enough data in their write() to a ppp device. This patch makes sure user provides at least 2 bytes. It adds PPP_PROTO_LEN macro that could replace in net-next many occurrences of hard-coded 2 value. I replaced only one occurrence to ease backports to stable kernels. The bug manifests in the following report: BUG: KMSAN: uninit-value in ppp_send_frame+0x28d/0x27c0 drivers/net/ppp/ppp_generic.c:1740 ppp_send_frame+0x28d/0x27c0 drivers/net/ppp/ppp_generic.c:1740 __ppp_xmit_process+0x23e/0x4b0 drivers/net/ppp/ppp_generic.c:1640 ppp_xmit_process+0x1fe/0x480 drivers/net/ppp/ppp_generic.c:1661 ppp_write+0x5cb/0x5e0 drivers/net/ppp/ppp_generic.c:513 do_iter_write+0xb0c/0x1500 fs/read_write.c:853 vfs_writev fs/read_write.c:924 [inline] do_writev+0x645/0xe00 fs/read_write.c:967 __do_sys_writev fs/read_write.c:1040 [inline] __se_sys_writev fs/read_write.c:1037 [inline] __x64_sys_writev+0xe5/0x120 fs/read_write.c:1037 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was created at: slab_post_alloc_hook mm/slab.h:524 [inline] slab_alloc_node mm/slub.c:3251 [inline] __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974 kmalloc_reserve net/core/skbuff.c:354 [inline] __alloc_skb+0x545/0xf90 net/core/skbuff.c:426 alloc_skb include/linux/skbuff.h:1126 [inline] ppp_write+0x11d/0x5e0 drivers/net/ppp/ppp_generic.c:501 do_iter_write+0xb0c/0x1500 fs/read_write.c:853 vfs_writev fs/read_write.c:924 [inline] do_writev+0x645/0xe00 fs/read_write.c:967 __do_sys_writev fs/read_write.c:1040 [inline] __se_sys_writev fs/read_write.c:1037 [inline] __x64_sys_writev+0xe5/0x120 fs/read_write.c:1037 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet Cc: Paul Mackerras Cc: linux-ppp@vger.kernel.org Reported-by: syzbot Acked-by: Guillaume Nault Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 75a50eb8c50714a03131993a9c609e9f0b5e930b Author: Zhou Qingyang Date: Wed Dec 1 02:11:40 2021 +0800 pcmcia: rsrc_nonstatic: Fix a NULL pointer dereference in nonstatic_find_mem_region() [ Upstream commit 977d2e7c63c3d04d07ba340b39987742e3241554 ] In nonstatic_find_mem_region(), pcmcia_make_resource() is assigned to res and used in pci_bus_alloc_resource(). There a dereference of res in pci_bus_alloc_resource(), which could lead to a NULL pointer dereference on failure of pcmcia_make_resource(). Fix this bug by adding a check of res. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_PCCARD_NONSTATIC=y show no new warnings, and our static analyzer no longer warns about this code. Fixes: 49b1153adfe1 ("pcmcia: move all pcmcia_resource_ops providers into one module") Signed-off-by: Zhou Qingyang Signed-off-by: Dominik Brodowski Signed-off-by: Sasha Levin commit 73af27a0ac1d9a2ce23faaeed8d26e165340a6e0 Author: Zhou Qingyang Date: Wed Dec 1 00:59:23 2021 +0800 pcmcia: rsrc_nonstatic: Fix a NULL pointer dereference in __nonstatic_find_io_region() [ Upstream commit ca0fe0d7c35c97528bdf621fdca75f13157c27af ] In __nonstatic_find_io_region(), pcmcia_make_resource() is assigned to res and used in pci_bus_alloc_resource(). There is a dereference of res in pci_bus_alloc_resource(), which could lead to a NULL pointer dereference on failure of pcmcia_make_resource(). Fix this bug by adding a check of res. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_PCCARD_NONSTATIC=y show no new warnings, and our static analyzer no longer warns about this code. Fixes: 49b1153adfe1 ("pcmcia: move all pcmcia_resource_ops providers into one module") Signed-off-by: Zhou Qingyang [linux@dominikbrodowski.net: Fix typo in commit message] Signed-off-by: Dominik Brodowski Signed-off-by: Sasha Levin commit b287eb85e51a04fb26ad3db1b73a17fbdaa11e17 Author: Zhang Zixun Date: Mon Dec 27 22:02:49 2021 +0100 x86/mce/inject: Avoid out-of-bounds write when setting flags [ Upstream commit de768416b203ac84e02a757b782a32efb388476f ] A contrived zero-length write, for example, by using write(2): ... ret = write(fd, str, 0); ... to the "flags" file causes: BUG: KASAN: stack-out-of-bounds in flags_write Write of size 1 at addr ffff888019be7ddf by task writefile/3787 CPU: 4 PID: 3787 Comm: writefile Not tainted 5.16.0-rc7+ #12 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 due to accessing buf one char before its start. Prevent such out-of-bounds access. [ bp: Productize into a proper patch. Link below is the next best thing because the original mail didn't get archived on lore. ] Fixes: 0451d14d0561 ("EDAC, mce_amd_inj: Modify flags attribute to use string arguments") Signed-off-by: Zhang Zixun Signed-off-by: Borislav Petkov Link: https://lore.kernel.org/linux-edac/YcnePfF1OOqoQwrX@zn.tnic/ Signed-off-by: Sasha Levin commit a4d09f2f2f4922b15e317e39db54606ffe912602 Author: Wei Yongjun Date: Fri Dec 17 16:34:28 2021 +0800 usb: ftdi-elan: fix memory leak on device disconnect [ Upstream commit 1646566b5e0c556f779180a8514e521ac735de1e ] 'ftdi' is alloced when probe device, but not free on device disconnect, this cause a memory leak as follows: unreferenced object 0xffff88800d584000 (size 8400): comm "kworker/0:2", pid 3809, jiffies 4295453055 (age 13.784s) hex dump (first 32 bytes): 00 40 58 0d 80 88 ff ff 00 40 58 0d 80 88 ff ff .@X......@X..... 00 00 00 00 00 00 00 00 00 00 00 00 ad 4e ad de .............N.. backtrace: [<000000000d47f947>] kmalloc_order_trace+0x19/0x110 mm/slab_common.c:960 [<000000008548ac68>] ftdi_elan_probe+0x8c/0x880 drivers/usb/misc/ftdi-elan.c:2647 [<000000007f73e422>] usb_probe_interface+0x31b/0x800 drivers/usb/core/driver.c:396 [<00000000fe8d07fc>] really_probe+0x299/0xc30 drivers/base/dd.c:517 [<0000000005da7d32>] __driver_probe_device+0x357/0x500 drivers/base/dd.c:751 [<000000003c2c9579>] driver_probe_device+0x4e/0x140 drivers/base/dd.c:781 Fix it by freeing 'ftdi' after nobody use it. Fixes: a5c66e4b2418 ("USB: ftdi-elan: client driver for ELAN Uxxx adapters") Reported-by: Hulk Robot Signed-off-by: Wei Yongjun Link: https://lore.kernel.org/r/20211217083428.2441-1-weiyongjun1@huawei.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 6e8a52d0ce89f836d9869f8edc0172723455bb90 Author: Wang Hai Date: Tue Oct 26 13:23:48 2021 +0200 media: msi001: fix possible null-ptr-deref in msi001_probe() [ Upstream commit 3d5831a40d3464eea158180eb12cbd81c5edfb6a ] I got a null-ptr-deref report: BUG: kernel NULL pointer dereference, address: 0000000000000060 ... RIP: 0010:v4l2_ctrl_auto_cluster+0x57/0x270 ... Call Trace: msi001_probe+0x13b/0x24b [msi001] spi_probe+0xeb/0x130 ... do_syscall_64+0x35/0xb0 In msi001_probe(), if the creation of control for bandwidth_auto fails, there will be a null-ptr-deref issue when it is used in v4l2_ctrl_auto_cluster(). Check dev->hdl.error before v4l2_ctrl_auto_cluster() to fix this bug. Link: https://lore.kernel.org/linux-media/20211026112348.2878040-1-wanghai38@huawei.com Fixes: 93203dd6c7c4 ("[media] msi001: Mirics MSi001 silicon tuner driver") Reported-by: Hulk Robot Signed-off-by: Wang Hai Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit 4aa3acfc3d957698fcecbc27462848710c363fe7 Author: Anton Vasilyev Date: Thu Aug 22 12:41:47 2019 +0200 media: dw2102: Fix use after free [ Upstream commit 589a9f0eb799f77de2c09583bf5bad221fa5d685 ] dvb_usb_device_init stores parts of properties at d->props and d->desc and uses it on dvb_usb_device_exit. Free of properties on module probe leads to use after free. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204597 The patch makes properties static instead of allocated on heap to prevent memleak and use after free. Also fixes s421_properties.devices initialization to have 2 element instead of 6 copied from p7500_properties. [mchehab: fix function call alignments] Link: https://lore.kernel.org/linux-media/20190822104147.4420-1-vasilyev@ispras.ru Signed-off-by: Anton Vasilyev Fixes: 299c7007e936 ("media: dw2102: Fix memleak on sequence of probes") Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit 29e8ce3c265043ea4a29b6d6bd4bf12df1384b4c Author: Li Hua Date: Fri Dec 3 03:36:18 2021 +0000 sched/rt: Try to restart rt period timer when rt runtime exceeded [ Upstream commit 9b58e976b3b391c0cf02e038d53dd0478ed3013c ] When rt_runtime is modified from -1 to a valid control value, it may cause the task to be throttled all the time. Operations like the following will trigger the bug. E.g: 1. echo -1 > /proc/sys/kernel/sched_rt_runtime_us 2. Run a FIFO task named A that executes while(1) 3. echo 950000 > /proc/sys/kernel/sched_rt_runtime_us When rt_runtime is -1, The rt period timer will not be activated when task A enqueued. And then the task will be throttled after setting rt_runtime to 950,000. The task will always be throttled because the rt period timer is not activated. Fixes: d0b27fa77854 ("sched: rt-group: synchonised bandwidth period") Reported-by: Hulk Robot Signed-off-by: Li Hua Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20211203033618.11895-1-hucool.lihua@huawei.com Signed-off-by: Sasha Levin commit 928a814738d92bdac7bd99c28bf4e862bc2fbee9 Author: Robert Schlabbach Date: Wed Dec 1 22:08:43 2021 +0100 media: si2157: Fix "warm" tuner state detection [ Upstream commit a6441ea29cb2c9314654e093a1cd8020b9b851c8 ] Commit e955f959ac52 ("media: si2157: Better check for running tuner in init") completely broke the "warm" tuner detection of the si2157 driver due to a simple endian error: The Si2157 CRYSTAL_TRIM property code is 0x0402 and needs to be transmitted LSB first. However, it was inserted MSB first, causing the warm detection to always fail and spam the kernel log with tuner initialization messages each time the DVB frontend device was closed and reopened: [ 312.215682] si2157 16-0060: found a 'Silicon Labs Si2157-A30' [ 312.264334] si2157 16-0060: firmware version: 3.0.5 [ 342.248593] si2157 16-0060: found a 'Silicon Labs Si2157-A30' [ 342.295743] si2157 16-0060: firmware version: 3.0.5 [ 372.328574] si2157 16-0060: found a 'Silicon Labs Si2157-A30' [ 372.385035] si2157 16-0060: firmware version: 3.0.5 Also, the reinitializations were observed disturb _other_ tuners on multi-tuner cards such as the Hauppauge WinTV-QuadHD, leading to missed or errored packets when one of the other DVB frontend devices on that card was opened. Fix the order of the property code bytes to make the warm detection work again, also reducing the tuner initialization message in the kernel log to once per power-on, as well as fixing the interference with other tuners. Link: https://lore.kernel.org/linux-media/trinity-2a86eb9d-6264-4387-95e1-ba7b79a4050f-1638392923493@3c-app-gmx-bap03 Fixes: e955f959ac52 ("media: si2157: Better check for running tuner in init") Reported-by: Robert Schlabbach Signed-off-by: Robert Schlabbach Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit c598a9e5f5af5763792b8011a919b53be33b5f15 Author: Zhou Qingyang Date: Tue Nov 30 17:34:44 2021 +0100 media: saa7146: mxb: Fix a NULL pointer dereference in mxb_attach() [ Upstream commit 0407c49ebe330333478440157c640fffd986f41b ] In mxb_attach(dev, info), saa7146_vv_init() is called to allocate a new memory for dev->vv_data. saa7146_vv_release() will be called on failure of mxb_probe(dev). There is a dereference of dev->vv_data in saa7146_vv_release(), which could lead to a NULL pointer dereference on failure of saa7146_vv_init(). Fix this bug by adding a check of saa7146_vv_init(). This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_VIDEO_MXB=m show no new warnings, and our static analyzer no longer warns about this code. Fixes: 03b1930efd3c ("V4L/DVB: saa7146: fix regression of the av7110/budget-av driver") Signed-off-by: Zhou Qingyang Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit 9976f17614ec9e907f2cd4a625003fdf071f0b7b Author: Zhou Qingyang Date: Tue Nov 30 16:38:05 2021 +0100 media: dib8000: Fix a memleak in dib8000_init() [ Upstream commit 8dbdcc7269a83305ee9d677b75064d3530a48ee2 ] In dib8000_init(), the variable fe is not freed or passed out on the failure of dib8000_identify(&state->i2c), which could lead to a memleak. Fix this bug by adding a kfree of fe in the error path. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_DVB_DIB8000=m show no new warnings, and our static analyzer no longer warns about this code. Fixes: 77e2c0f5d471 ("V4L/DVB (12900): DiB8000: added support for DiBcom ISDB-T/ISDB-Tsb demodulator DiB8000") Signed-off-by: Zhou Qingyang Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit bb751a9e3c87fb1c408f3ef181acfde39fe14bde Author: Tasos Sahanidis Date: Fri Sep 3 09:47:58 2021 +0300 floppy: Fix hang in watchdog when disk is ejected [ Upstream commit fb48febce7e30baed94dd791e19521abd2c3fd83 ] When the watchdog detects a disk change, it calls cancel_activity(), which in turn tries to cancel the fd_timer delayed work. In the above scenario, fd_timer_fn is set to fd_watchdog(), meaning it is trying to cancel its own work. This results in a hang as cancel_delayed_work_sync() is waiting for the watchdog (itself) to return, which never happens. This can be reproduced relatively consistently by attempting to read a broken floppy, and ejecting it while IO is being attempted and retried. To resolve this, this patch calls cancel_delayed_work() instead, which cancels the work without waiting for the watchdog to return and finish. Before this regression was introduced, the code in this section used del_timer(), and not del_timer_sync() to delete the watchdog timer. Link: https://lore.kernel.org/r/399e486c-6540-db27-76aa-7a271b061f76@tasossah.com Fixes: 070ad7e793dc ("floppy: convert to delayed work and single-thread wq") Signed-off-by: Tasos Sahanidis Signed-off-by: Denis Efremov Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit b351683baf05b1da006b92578d68fc49679848e5 Author: Lino Sanfilippo Date: Mon Nov 29 18:42:38 2021 +0100 serial: amba-pl011: do not request memory region twice [ Upstream commit d1180405c7b5c7a1c6bde79d5fc24fe931430737 ] With commit 3873e2d7f63a ("drivers: PL011: refactor pl011_probe()") the function devm_ioremap() called from pl011_setup_port() was replaced with devm_ioremap_resource(). Since this function not only remaps but also requests the ports io memory region it now collides with the .config_port() callback which requests the same region at uart port registration. Since devm_ioremap_resource() already claims the memory successfully, the request in .config_port() fails. Later at uart port deregistration the attempt to release the unclaimed memory also fails. The failure results in a “Trying to free nonexistent resource" warning. Fix these issues by removing the callbacks that implement the redundant memory allocation/release. Also make sure that changing the drivers io memory base address via TIOCSSERIAL is not allowed any more. Fixes: 3873e2d7f63a ("drivers: PL011: refactor pl011_probe()") Signed-off-by: Lino Sanfilippo Link: https://lore.kernel.org/r/20211129174238.8333-1-LinoSanfilippo@gmx.de Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit cada8b5b894acaadef104311e97b193a65ba8197 Author: Zhou Qingyang Date: Wed Dec 1 23:13:10 2021 +0800 drm/radeon/radeon_kms: Fix a NULL pointer dereference in radeon_driver_open_kms() [ Upstream commit ab50cb9df8896b39aae65c537a30de2c79c19735 ] In radeon_driver_open_kms(), radeon_vm_bo_add() is assigned to vm->ib_bo_va and passes and used in radeon_vm_bo_set_addr(). In radeon_vm_bo_set_addr(), there is a dereference of vm->ib_bo_va, which could lead to a NULL pointer dereference on failure of radeon_vm_bo_add(). Fix this bug by adding a check of vm->ib_bo_va. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_DRM_RADEON=m show no new warnings, and our static analyzer no longer warns about this code. Fixes: cc9e67e3d700 ("drm/radeon: fix VM IB handling") Reviewed-by: Christian König Signed-off-by: Zhou Qingyang Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit 5354ff0a5dfb7d92a93fec497819c7035957b1f1 Author: Zhou Qingyang Date: Fri Dec 3 00:17:36 2021 +0800 drm/amdgpu: Fix a NULL pointer dereference in amdgpu_connector_lcd_native_mode() [ Upstream commit b220110e4cd442156f36e1d9b4914bb9e87b0d00 ] In amdgpu_connector_lcd_native_mode(), the return value of drm_mode_duplicate() is assigned to mode, and there is a dereference of it in amdgpu_connector_lcd_native_mode(), which will lead to a NULL pointer dereference on failure of drm_mode_duplicate(). Fix this bug add a check of mode. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_DRM_AMDGPU=m show no new warnings, and our static analyzer no longer warns about this code. Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)") Signed-off-by: Zhou Qingyang Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit 66edf048ef9598ed907709eca8f459220efd9d68 Author: Dmitry Baryshkov Date: Wed Dec 1 05:05:59 2021 +0300 arm64: dts: qcom: msm8916: fix MMC controller aliases [ Upstream commit b0293c19d42f6d6951c2fab9a47fed50baf2c14d ] Change sdhcN aliases to mmcN to make them actually work. Currently the board uses non-standard aliases sdhcN, which do not work, resulting in mmc0 and mmc1 hosts randomly changing indices between boots. Fixes: c4da5a561627 ("arm64: dts: qcom: Add msm8916 sdhci configuration nodes") Signed-off-by: Dmitry Baryshkov Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211201020559.1611890-1-dmitry.baryshkov@linaro.org Signed-off-by: Sasha Levin commit 271bf4601ec7ef1c670632f90951cb9445896b20 Author: Florian Westphal Date: Tue Nov 23 12:50:31 2021 +0100 netfilter: bridge: add support for pppoe filtering [ Upstream commit 28b78ecffea8078d81466b2e01bb5a154509f1ba ] This makes 'bridge-nf-filter-pppoe-tagged' sysctl work for bridged traffic. Looking at the original commit it doesn't appear this ever worked: static unsigned int br_nf_post_routing(unsigned int hook, struct sk_buff **pskb, [..] if (skb->protocol == htons(ETH_P_8021Q)) { skb_pull(skb, VLAN_HLEN); skb->network_header += VLAN_HLEN; + } else if (skb->protocol == htons(ETH_P_PPP_SES)) { + skb_pull(skb, PPPOE_SES_HLEN); + skb->network_header += PPPOE_SES_HLEN; } [..] NF_HOOK(... POST_ROUTING, ...) ... but the adjusted offsets are never restored. The alternative would be to rip this code out for good, but otoh we'd have to keep this anyway for the vlan handling (which works because vlan tag info is in the skb, not the packet payload). Reported-and-tested-by: Amish Chana Fixes: 516299d2f5b6f97 ("[NETFILTER]: bridge-nf: filter bridged IPv4/IPv6 encapsulated in pppoe traffic") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 5f53dff458a91f83ab75e5852f2c3a891da46d80 Author: Dafna Hirschfeld Date: Wed Nov 17 14:06:30 2021 +0100 media: mtk-vcodec: call v4l2_m2m_ctx_release first when file is released [ Upstream commit 9f89c881bffbdffe4060ffaef3489a2830a6dd9c ] The func v4l2_m2m_ctx_release waits for currently running jobs to finish and then stop streaming both queues and frees the buffers. All this should be done before the call to mtk_vcodec_enc_release which frees the encoder handler. This fixes null-pointer dereference bug: [ 638.028076] Mem abort info: [ 638.030932] ESR = 0x96000004 [ 638.033978] EC = 0x25: DABT (current EL), IL = 32 bits [ 638.039293] SET = 0, FnV = 0 [ 638.042338] EA = 0, S1PTW = 0 [ 638.045474] FSC = 0x04: level 0 translation fault [ 638.050349] Data abort info: [ 638.053224] ISV = 0, ISS = 0x00000004 [ 638.057055] CM = 0, WnR = 0 [ 638.060018] user pgtable: 4k pages, 48-bit VAs, pgdp=000000012b6db000 [ 638.066485] [00000000000001a0] pgd=0000000000000000, p4d=0000000000000000 [ 638.073277] Internal error: Oops: 96000004 [#1] SMP [ 638.078145] Modules linked in: rfkill mtk_vcodec_dec mtk_vcodec_enc uvcvideo mtk_mdp mtk_vcodec_common videobuf2_dma_contig v4l2_h264 cdc_ether v4l2_mem2mem videobuf2_vmalloc usbnet videobuf2_memops videobuf2_v4l2 r8152 videobuf2_common videodev cros_ec_sensors cros_ec_sensors_core industrialio_triggered_buffer kfifo_buf elan_i2c elants_i2c sbs_battery mc cros_usbpd_charger cros_ec_chardev cros_usbpd_logger crct10dif_ce mtk_vpu fuse ip_tables x_tables ipv6 [ 638.118583] CPU: 0 PID: 212 Comm: kworker/u8:5 Not tainted 5.15.0-06427-g58a1d4dcfc74-dirty #109 [ 638.127357] Hardware name: Google Elm (DT) [ 638.131444] Workqueue: mtk-vcodec-enc mtk_venc_worker [mtk_vcodec_enc] [ 638.137974] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 638.144925] pc : vp8_enc_encode+0x34/0x2b0 [mtk_vcodec_enc] [ 638.150493] lr : venc_if_encode+0xac/0x1b0 [mtk_vcodec_enc] [ 638.156060] sp : ffff8000124d3c40 [ 638.159364] x29: ffff8000124d3c40 x28: 0000000000000000 x27: 0000000000000000 [ 638.166493] x26: 0000000000000000 x25: ffff0000e7f252d0 x24: ffff8000124d3d58 [ 638.173621] x23: ffff8000124d3d58 x22: ffff8000124d3d60 x21: 0000000000000001 [ 638.180750] x20: ffff80001137e000 x19: 0000000000000000 x18: 0000000000000001 [ 638.187878] x17: 000000040044ffff x16: 00400032b5503510 x15: 0000000000000000 [ 638.195006] x14: ffff8000118536c0 x13: ffff8000ee1da000 x12: 0000000030d4d91d [ 638.202134] x11: 0000000000000000 x10: 0000000000000980 x9 : ffff8000124d3b20 [ 638.209262] x8 : ffff0000c18d4ea0 x7 : ffff0000c18d44c0 x6 : ffff0000c18d44c0 [ 638.216391] x5 : ffff80000904a3b0 x4 : ffff8000124d3d58 x3 : ffff8000124d3d60 [ 638.223519] x2 : ffff8000124d3d78 x1 : 0000000000000001 x0 : ffff80001137efb8 [ 638.230648] Call trace: [ 638.233084] vp8_enc_encode+0x34/0x2b0 [mtk_vcodec_enc] [ 638.238304] venc_if_encode+0xac/0x1b0 [mtk_vcodec_enc] [ 638.243525] mtk_venc_worker+0x110/0x250 [mtk_vcodec_enc] [ 638.248918] process_one_work+0x1f8/0x498 [ 638.252923] worker_thread+0x140/0x538 [ 638.256664] kthread+0x148/0x158 [ 638.259884] ret_from_fork+0x10/0x20 [ 638.263455] Code: f90023f9 2a0103f5 aa0303f6 aa0403f8 (f940d277) [ 638.269538] ---[ end trace e374fc10f8e181f5 ]--- [gst-master] root@debian:~/gst-build# [ 638.019193] Unable to handle kernel NULL pointer dereference at virtual address 00000000000001a0 Fixes: 4e855a6efa547 ("[media] vcodec: mediatek: Add Mediatek V4L2 Video Encoder Driver") Signed-off-by: Dafna Hirschfeld Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit ba69399a374d367368a761a1be76b812a5ff7736 Author: Tudor Ambarus Date: Thu Nov 25 11:00:18 2021 +0200 tty: serial: atmel: Call dma_async_issue_pending() [ Upstream commit 4f4b9b5895614eb2e2b5f4cab7858f44bd113e1b ] The driver wrongly assummed that tx_submit() will start the transfer, which is not the case, now that the at_xdmac driver is fixed. tx_submit is supposed to push the current transaction descriptor to a pending queue, waiting for issue_pending to be called. issue_pending must start the transfer, not tx_submit. Fixes: 34df42f59a60 ("serial: at91: add rx dma support") Fixes: 08f738be88bb ("serial: at91: add tx dma support") Signed-off-by: Tudor Ambarus Link: https://lore.kernel.org/r/20211125090028.786832-4-tudor.ambarus@microchip.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit a170e9f8512ae61d6490d477daae2bfdcd66e0cb Author: Tudor Ambarus Date: Thu Nov 25 11:00:17 2021 +0200 tty: serial: atmel: Check return code of dmaengine_submit() [ Upstream commit 1e67bd2b8cb90b66e89562598e9c2046246832d3 ] The tx_submit() method of struct dma_async_tx_descriptor is entitled to do sanity checks and return errors if encountered. It's not the case for the DMA controller drivers that this client is using (at_h/xdmac), because they currently don't do sanity checks and always return a positive cookie at tx_submit() method. In case the controller drivers will implement sanity checks and return errors, print a message so that the client will be informed that something went wrong at tx_submit() level. Fixes: 08f738be88bb ("serial: at91: add tx dma support") Signed-off-by: Tudor Ambarus Acked-by: Richard Genoud Link: https://lore.kernel.org/r/20211125090028.786832-3-tudor.ambarus@microchip.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit d8002fab3eb47e690a378b459e67d73b95d9c0ef Author: Chengfeng Ye Date: Thu Nov 4 06:38:31 2021 -0700 crypto: qce - fix uaf on qce_ahash_register_one [ Upstream commit b4cb4d31631912842eb7dce02b4350cbb7562d5e ] Pointer base points to sub field of tmpl, it is dereferenced after tmpl is freed. Fix this by accessing base before free tmpl. Fixes: ec8f5d8f ("crypto: qce - Qualcomm crypto engine driver") Signed-off-by: Chengfeng Ye Acked-by: Thara Gopinath Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin commit cde0f1a0a486fb47017ef74e79f31aaf3444fff9 Author: Wang Hai Date: Fri Oct 15 16:57:41 2021 +0800 media: dmxdev: fix UAF when dvb_register_device() fails [ Upstream commit ab599eb11882f834951c436cc080c3455ba32b9b ] I got a use-after-free report: dvbdev: dvb_register_device: failed to create device dvb1.dvr0 (-12) ... ================================================================== BUG: KASAN: use-after-free in dvb_dmxdev_release+0xce/0x2f0 ... Call Trace: dump_stack_lvl+0x6c/0x8b print_address_description.constprop.0+0x48/0x70 kasan_report.cold+0x82/0xdb __asan_load4+0x6b/0x90 dvb_dmxdev_release+0xce/0x2f0 ... Allocated by task 7666: kasan_save_stack+0x23/0x50 __kasan_kmalloc+0x83/0xa0 kmem_cache_alloc_trace+0x22e/0x470 dvb_register_device+0x12f/0x980 dvb_dmxdev_init+0x1f3/0x230 ... Freed by task 7666: kasan_save_stack+0x23/0x50 kasan_set_track+0x20/0x30 kasan_set_free_info+0x24/0x40 __kasan_slab_free+0xf2/0x130 kfree+0xd1/0x5c0 dvb_register_device.cold+0x1ac/0x1fa dvb_dmxdev_init+0x1f3/0x230 ... When dvb_register_device() in dvb_dmxdev_init() fails, dvb_dmxdev_init() does not return a failure, and the memory pointed to by dvbdev or dvr_dvbdev is invalid at this point. If they are used subsequently, it will result in UFA or null-ptr-deref. If dvb_register_device() in dvb_dmxdev_init() fails, fix the bug by making dvb_dmxdev_init() return an error as well. Link: https://lore.kernel.org/linux-media/20211015085741.1203283-1-wanghai38@huawei.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Hulk Robot Signed-off-by: Wang Hai Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit 185c77cbb53bc7481acc5a0b4e6119bbe393d561 Author: Pavel Skripkin Date: Mon Nov 1 10:12:12 2021 +0300 Bluetooth: stop proccessing malicious adv data [ Upstream commit 3a56ef719f0b9682afb8a86d64b2399e36faa4e6 ] Syzbot reported slab-out-of-bounds read in hci_le_adv_report_evt(). The problem was in missing validaion check. We should check if data is not malicious and we can read next data block. If we won't check ptr validness, code can read a way beyond skb->end and it can cause problems, of course. Fixes: e95beb414168 ("Bluetooth: hci_le_adv_report_evt code refactoring") Reported-and-tested-by: syzbot+e3fcb9c4f3c2a931dc40@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin commit 5fcc98170056a7c4a156a5b32e3df5a9db9d8299 Author: Dongliang Mu Date: Mon Nov 1 09:55:39 2021 +0000 media: em28xx: fix memory leak in em28xx_init_dev [ Upstream commit 22be5a10d0b24eec9e45decd15d7e6112b25f080 ] In the em28xx_init_rev, if em28xx_audio_setup fails, this function fails to deallocate the media_dev allocated in the em28xx_media_device_init. Fix this by adding em28xx_unregister_media_device to free media_dev. BTW, this patch is tested in my local syzkaller instance, and it can prevent the memory leak from occurring again. CC: Pavel Skripkin Fixes: 37ecc7b1278f ("[media] em28xx: add media controller support") Signed-off-by: Dongliang Mu Reported-by: syzkaller Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit f8c81c5f47d31877e16724c1376a8c8c076a4f69 Author: Bryan O'Donoghue Date: Thu Oct 28 00:25:29 2021 +0100 wcn36xx: Indicate beacon not connection loss on MISSED_BEACON_IND [ Upstream commit 588b45c88ae130fe373a8c50edaf54735c3f4fe3 ] Firmware can trigger a missed beacon indication, this is not the same as a lost signal. Flag to Linux the missed beacon and let the WiFi stack decide for itself if the link is up or down by sending its own probe to determine this. We should only be signalling the link is lost when the firmware indicates Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware") Signed-off-by: Bryan O'Donoghue Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20211027232529.657764-1-bryan.odonoghue@linaro.org Signed-off-by: Sasha Levin commit fc96d5bb0e981f1168de8f2b86f29804114b829b Author: Maxime Ripard Date: Wed Sep 22 14:54:16 2021 +0200 clk: bcm-2835: Remove rounding up the dividers [ Upstream commit 8ca011ef4af48a7af7b15afd8a4a44039dd04cea ] The driver, once it found a divider, tries to round it up by increasing the least significant bit of the fractional part by one when the round_up argument is set and there's a remainder. However, since it increases the divider it will actually reduce the clock rate below what we were asking for, leading to issues with clk_set_min_rate() that will complain that our rounded clock rate is below the minimum of the rate. Since the dividers are fairly precise already, let's remove that part so that we can have clk_set_min_rate() working. This is effectively a revert of 9c95b32ca093 ("clk: bcm2835: add a round up ability to the clock divisor"). Fixes: 9c95b32ca093 ("clk: bcm2835: add a round up ability to the clock divisor") Signed-off-by: Maxime Ripard Acked-by: Stephen Boyd Reviewed-by: Nicolas Saenz Julienne Tested-by: Nicolas Saenz Julienne # boot and basic functionality Tested-by: Michael Stapelberg Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-3-maxime@cerno.tech Signed-off-by: Sasha Levin commit 33ed51d35774ae82048b1fc1f4c7e40ee20f01ac Author: Maxime Ripard Date: Wed Sep 22 14:54:15 2021 +0200 clk: bcm-2835: Pick the closest clock rate [ Upstream commit 5517357a4733d7cf7c17fc79d0530cfa47add372 ] The driver currently tries to pick the closest rate that is lower than the rate being requested. This causes an issue with clk_set_min_rate() since it actively checks for the rounded rate to be above the minimum that was just set. Let's change the logic a bit to pick the closest rate to the requested rate, no matter if it's actually higher or lower. Fixes: 6d18b8adbe67 ("clk: bcm2835: Support for clock parent selection") Signed-off-by: Maxime Ripard Acked-by: Stephen Boyd Reviewed-by: Nicolas Saenz Julienne Tested-by: Nicolas Saenz Julienne # boot and basic functionality Tested-by: Michael Stapelberg Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-2-maxime@cerno.tech Signed-off-by: Sasha Levin commit f031637eb96cb16705dcae5117306a317a596d21 Author: Wang Hai Date: Mon Oct 25 21:10:12 2021 +0800 Bluetooth: cmtp: fix possible panic when cmtp_init_sockets() fails [ Upstream commit 2a7ca7459d905febf519163bd9e3eed894de6bb7 ] I got a kernel BUG report when doing fault injection test: ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:45! ... RIP: 0010:__list_del_entry_valid.cold+0x12/0x4d ... Call Trace: proto_unregister+0x83/0x220 cmtp_cleanup_sockets+0x37/0x40 [cmtp] cmtp_exit+0xe/0x1f [cmtp] do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae If cmtp_init_sockets() in cmtp_init() fails, cmtp_init() still returns success. This will cause a kernel bug when accessing uncreated ctmp related data when the module exits. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Hulk Robot Signed-off-by: Wang Hai Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin commit b86b8fa8a134aec2d0a3e3645e55f0470865ca6c Author: Yifeng Li Date: Thu Dec 2 06:35:21 2021 +0000 PCI: Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller commit e445375882883f69018aa669b67cbb37ec873406 upstream. Like other SATA controller chips in the Marvell 88SE91xx series, the Marvell 88SE9125 has the same DMA requester ID hardware bug that prevents it from working under IOMMU. Add it to the list of devices that need the quirk. Without this patch, device initialization fails with DMA errors: ata8: softreset failed (1st FIS failed) DMAR: DRHD: handling fault status reg 2 DMAR: [DMA Write NO_PASID] Request device [03:00.1] fault addr 0xfffc0000 [fault reason 0x02] Present bit in context entry is clear DMAR: DRHD: handling fault status reg 2 DMAR: [DMA Read NO_PASID] Request device [03:00.1] fault addr 0xfffc0000 [fault reason 0x02] Present bit in context entry is clear After applying the patch, the controller can be successfully initialized: ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 330) ata8.00: ATAPI: PIONEER BD-RW BDR-207M, 1.21, max UDMA/100 ata8.00: configured for UDMA/100 scsi 7:0:0:0: CD-ROM PIONEER BD-RW BDR-207M 1.21 PQ: 0 ANSI: 5 Link: https://lore.kernel.org/r/YahpKVR+McJVDdkD@work Reported-by: Sam Bingner Tested-by: Sam Bingner Tested-by: Yifeng Li Signed-off-by: Yifeng Li Signed-off-by: Bjorn Helgaas Reviewed-by: Krzysztof Wilczyński Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit d8d9559c468cfbc7283b566573eb8650872ae42c Author: Gang Li Date: Fri Jan 14 14:05:23 2022 -0800 shmem: fix a race between shmem_unused_huge_shrink and shmem_evict_inode commit 62c9827cbb996c2c04f615ecd783ce28bcea894b upstream. Fix a data race in commit 779750d20b93 ("shmem: split huge pages beyond i_size under memory pressure"). Here are call traces causing race: Call Trace 1: shmem_unused_huge_shrink+0x3ae/0x410 ? __list_lru_walk_one.isra.5+0x33/0x160 super_cache_scan+0x17c/0x190 shrink_slab.part.55+0x1ef/0x3f0 shrink_node+0x10e/0x330 kswapd+0x380/0x740 kthread+0xfc/0x130 ? mem_cgroup_shrink_node+0x170/0x170 ? kthread_create_on_node+0x70/0x70 ret_from_fork+0x1f/0x30 Call Trace 2: shmem_evict_inode+0xd8/0x190 evict+0xbe/0x1c0 do_unlinkat+0x137/0x330 do_syscall_64+0x76/0x120 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 A simple explanation: Image there are 3 items in the local list (@list). In the first traversal, A is not deleted from @list. 1) A->B->C ^ | pos (leave) In the second traversal, B is deleted from @list. Concurrently, A is deleted from @list through shmem_evict_inode() since last reference counter of inode is dropped by other thread. Then the @list is corrupted. 2) A->B->C ^ ^ | | evict pos (drop) We should make sure the inode is either on the global list or deleted from any local list before iput(). Fixed by moving inodes back to global list before we put them. [akpm@linux-foundation.org: coding style fixes] Link: https://lkml.kernel.org/r/20211125064502.99983-1-ligang.bdlg@bytedance.com Fixes: 779750d20b93 ("shmem: split huge pages beyond i_size under memory pressure") Signed-off-by: Gang Li Reviewed-by: Muchun Song Acked-by: Kirill A. Shutemov Cc: Hugh Dickins Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 7666692836348343ee0c3938eefee3311f4d8451 Author: Johan Hovold Date: Wed Dec 22 11:48:43 2021 +0100 can: softing_cs: softingcs_probe(): fix memleak on registration failure commit ced4913efb0acc844ed65cc01d091a85d83a2082 upstream. In case device registration fails during probe, the driver state and the embedded platform device structure needs to be freed using platform_device_put() to properly free all resources (e.g. the device name). Fixes: 0a0b7a5f7a04 ("can: add driver for Softing card") Link: https://lore.kernel.org/all/20211222104843.6105-1-johan@kernel.org Cc: stable@vger.kernel.org # 2.6.38 Signed-off-by: Johan Hovold Reviewed-by: Greg Kroah-Hartman Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman commit 523160a8392db8644974ce0ec9c025758eada062 Author: Johan Hovold Date: Mon Oct 25 13:16:41 2021 +0100 media: stk1160: fix control-message timeouts commit 6aa6e70cdb5b863a57bad61310bf89b6617a5d2d upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 9cb2173e6ea8 ("[media] media: Add stk1160 new driver (easycap replacement)") Cc: stable@vger.kernel.org # 3.7 Signed-off-by: Johan Hovold Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman commit 463c62bc4b732162d8c0aa4ee8ff797a9292d3ee Author: Johan Hovold Date: Mon Oct 25 13:16:39 2021 +0100 media: pvrusb2: fix control-message timeouts commit b82bf9b9dc305d7d3d93eab106d70dbf2171b43e upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: d855497edbfb ("V4L/DVB (4228a): pvrusb2 to kernel 2.6.18") Cc: stable@vger.kernel.org # 2.6.18 Signed-off-by: Johan Hovold Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman commit ac04370aee646e4f4b4d5fcfe53b88e4015210e7 Author: Johan Hovold Date: Mon Oct 25 13:16:35 2021 +0100 media: redrat3: fix control-message timeouts commit 2adc965c8bfa224e11ecccf9c92fd458c4236428 upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 2154be651b90 ("[media] redrat3: new rc-core IR transceiver device driver") Cc: stable@vger.kernel.org # 3.0 Signed-off-by: Johan Hovold Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman commit 5f167bb6fc3b5525fb1450e69b3a3005afb21c21 Author: Michael Kuron Date: Sun Sep 26 21:51:26 2021 +0100 media: dib0700: fix undefined behavior in tuner shutdown commit f7b77ebe6d2f49c7747b2d619586d1aa33f9ea91 upstream. This fixes a problem where closing the tuner would leave it in a state where it would not tune to any channel when reopened. This problem was discovered as part of https://github.com/hselasky/webcamd/issues/16. Since adap->id is 0 or 1, this bit-shift overflows, which is undefined behavior. The driver still worked in practice as the overflow would in most environments result in 0, which rendered the line a no-op. When running the driver as part of webcamd however, the overflow could lead to 0xff due to optimizations by the compiler, which would, in the end, improperly shut down the tuner. The bug is a regression introduced in the commit referenced below. The present patch causes identical behavior to before that commit for adap->id equal to 0 or 1. The driver does not contain support for dib0700 devices with more adapters, assuming such even exist. Tests have been performed with the Xbox One Digital TV Tuner on amd64. Not all dib0700 devices are expected to be affected by the regression; this code path is only taken by those with incorrect endpoint numbers. Link: https://lore.kernel.org/linux-media/1d2fc36d94ced6f67c7cc21dcc469d5e5bdd8201.1632689033.git.mchehab+huawei@kernel.org Cc: stable@vger.kernel.org Fixes: 7757ddda6f4f ("[media] DiB0700: add function to change I2C-speed") Signed-off-by: Michael Kuron Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman commit ae54830153ceac3a2ad705b0465774a8327465bc Author: Johan Hovold Date: Mon Oct 25 13:16:40 2021 +0100 media: s2255: fix control-message timeouts commit f71d272ad4e354097020a4e6b1dc6e4b59feb50f upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Use the common control-message timeout define for the five-second timeouts. Fixes: 38f993ad8b1f ("V4L/DVB (8125): This driver adds support for the Sensoray 2255 devices.") Cc: stable@vger.kernel.org # 2.6.27 Signed-off-by: Johan Hovold Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman commit a2829a70b93e8436de8934e210c78908fdafa2f1 Author: Johan Hovold Date: Mon Oct 25 13:16:37 2021 +0100 media: cpia2: fix control-message timeouts commit 10729be03327f53258cb196362015ad5c6eabe02 upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: ab33d5071de7 ("V4L/DVB (3376): Add cpia2 camera support") Cc: stable@vger.kernel.org # 2.6.17 Signed-off-by: Johan Hovold Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman commit bedd4a5daa3e7edf27c6464a132536b749df3377 Author: Johan Hovold Date: Mon Oct 25 13:16:38 2021 +0100 media: em28xx: fix control-message timeouts commit d9b7e8df3aa9b8c10708aab60e72e79ac08237e4 upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: a6c2ba283565 ("[PATCH] v4l: 716: support for em28xx board family") Cc: stable@vger.kernel.org # 2.6.16 Signed-off-by: Johan Hovold Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman commit c69238c8a198421e565fac2519561bccad9c885f Author: Johan Hovold Date: Mon Oct 25 13:16:34 2021 +0100 media: mceusb: fix control-message timeouts commit 16394e998cbb050730536bdf7e89f5a70efbd974 upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 66e89522aff7 ("V4L/DVB: IR: add mceusb IR receiver driver") Cc: stable@vger.kernel.org # 2.6.36 Signed-off-by: Johan Hovold Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman commit 18345e9cb26311260c7c48f6bd2ce614e9301a18 Author: Johan Hovold Date: Mon Oct 25 13:16:36 2021 +0100 media: flexcop-usb: fix control-message timeouts commit cd1798a387825cc4a51282f5a611ad05bb1ad75f upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Note that the driver was multiplying some of the timeout values with HZ twice resulting in 3000-second timeouts with HZ=1000. Also note that two of the timeout defines are currently unused. Fixes: 2154be651b90 ("[media] redrat3: new rc-core IR transceiver device driver") Cc: stable@vger.kernel.org # 3.0 Signed-off-by: Johan Hovold Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman commit 29a8923b70f8357011091bd8df99eeace6dc1a88 Author: Mateusz Jończyk Date: Fri Dec 10 21:01:23 2021 +0100 rtc: cmos: take rtc_lock while reading from CMOS commit 454f47ff464325223129b9b5b8d0b61946ec704d upstream. Reading from the CMOS involves writing to the index register and then reading from the data register. Therefore access to the CMOS has to be serialized with rtc_lock. This invocation of CMOS_READ was not serialized, which could cause trouble when other code is accessing CMOS at the same time. Use spin_lock_irq() like the rest of the function. Nothing in kernel modifies the RTC_DM_BINARY bit, so there could be a separate pair of spin_lock_irq() / spin_unlock_irq() before doing the math. Signed-off-by: Mateusz Jończyk Reviewed-by: Nobuhiro Iwamatsu Cc: Alessandro Zummo Cc: Alexandre Belloni Cc: stable@vger.kernel.org Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20211210200131.153887-2-mat.jonczyk@o2.pl Signed-off-by: Greg Kroah-Hartman commit af429e17b9de56458095a38720b96786b8f03412 Author: Krzysztof Kozlowski Date: Wed Jan 19 08:48:16 2022 +0100 nfc: llcp: fix NULL error pointer dereference on sendmsg() after failed bind() commit dded08927ca3c31a5c37f8e7f95fe98770475dd4 upstream. Syzbot detected a NULL pointer dereference of nfc_llcp_sock->dev pointer (which is a 'struct nfc_dev *') with calls to llcp_sock_sendmsg() after a failed llcp_sock_bind(). The message being sent is a SOCK_DGRAM. KASAN report: BUG: KASAN: null-ptr-deref in nfc_alloc_send_skb+0x2d/0xc0 Read of size 4 at addr 00000000000005c8 by task llcp_sock_nfc_a/899 CPU: 5 PID: 899 Comm: llcp_sock_nfc_a Not tainted 5.16.0-rc6-next-20211224-00001-gc6437fbf18b0 #125 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Call Trace: dump_stack_lvl+0x45/0x59 ? nfc_alloc_send_skb+0x2d/0xc0 __kasan_report.cold+0x117/0x11c ? mark_lock+0x480/0x4f0 ? nfc_alloc_send_skb+0x2d/0xc0 kasan_report+0x38/0x50 nfc_alloc_send_skb+0x2d/0xc0 nfc_llcp_send_ui_frame+0x18c/0x2a0 ? nfc_llcp_send_i_frame+0x230/0x230 ? __local_bh_enable_ip+0x86/0xe0 ? llcp_sock_connect+0x470/0x470 ? llcp_sock_connect+0x470/0x470 sock_sendmsg+0x8e/0xa0 ____sys_sendmsg+0x253/0x3f0 ... The issue was visible only with multiple simultaneous calls to bind() and sendmsg(), which resulted in most of the bind() calls to fail. The bind() was failing on checking if there is available WKS/SDP/SAP (respective bit in 'struct nfc_llcp_local' fields). When there was no available WKS/SDP/SAP, the bind returned error but the sendmsg() to such socket was able to trigger mentioned NULL pointer dereference of nfc_llcp_sock->dev. The code looks simply racy and currently it protects several paths against race with checks for (!nfc_llcp_sock->local) which is NULL-ified in error paths of bind(). The llcp_sock_sendmsg() did not have such check but called function nfc_llcp_send_ui_frame() had, although not protected with lock_sock(). Therefore the race could look like (same socket is used all the time): CPU0 CPU1 ==== ==== llcp_sock_bind() - lock_sock() - success - release_sock() - return 0 llcp_sock_sendmsg() - lock_sock() - release_sock() llcp_sock_bind(), same socket - lock_sock() - error - nfc_llcp_send_ui_frame() - if (!llcp_sock->local) - llcp_sock->local = NULL - nfc_put_device(dev) - dereference llcp_sock->dev - release_sock() - return -ERRNO The nfc_llcp_send_ui_frame() checked llcp_sock->local outside of the lock, which is racy and ineffective check. Instead, its caller llcp_sock_sendmsg(), should perform the check inside lock_sock(). Reported-and-tested-by: syzbot+7f23bcddf626e0593a39@syzkaller.appspotmail.com Fixes: b874dec21d1c ("NFC: Implement LLCP connection less Tx path") Cc: Signed-off-by: Krzysztof Kozlowski Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit cc6ccfdaa793c6f94762303e83b984a3543695bf Author: Jason Gerecke Date: Tue Jan 18 14:38:41 2022 -0800 HID: wacom: Avoid using stale array indicies to read contact count commit 20f3cf5f860f9f267a6a6e5642d3d0525edb1814 upstream. If we ever see a touch report with contact count data we initialize several variables used to read the contact count in the pre-report phase. These variables are never reset if we process a report which doesn't contain a contact count, however. This can cause the pre- report function to trigger a read of arbitrary memory (e.g. NULL if we're lucky) and potentially crash the driver. This commit restores resetting of the variables back to default "none" values that were used prior to the commit mentioned below. Link: https://github.com/linuxwacom/input-wacom/issues/276 Fixes: 003f50ab673c (HID: wacom: Update last_slot_field during pre_report phase) CC: stable@vger.kernel.org Signed-off-by: Jason Gerecke Reviewed-by: Ping Cheng Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman commit 5e1715f50f24108d6ad84fd12203530c993ed1f9 Author: Jason Gerecke Date: Tue Jan 18 14:37:56 2022 -0800 HID: wacom: Ignore the confidence flag when a touch is removed commit df03e9bd6d4806619b4cdc91a3d7695818a8e2b7 upstream. AES hardware may internally re-classify a contact that it thought was intentional as a palm. Intentional contacts are reported as "down" with the confidence bit set. When this re-classification occurs, however, the state transitions to "up" with the confidence bit cleared. This kind of transition appears to be legal according to Microsoft docs, but we do not handle it correctly. Because the confidence bit is clear, we don't call `wacom_wac_finger_slot` and update userspace. This causes hung touches that confuse userspace and interfere with pen arbitration. This commit adds a special case to ignore the confidence flag if a contact is reported as removed. This ensures we do not leave a hung touch if one of these re-classification events occured. Ideally we'd have some way to also let userspace know that the touch has been re-classified as a palm and needs to be canceled, but that's not possible right now :) Link: https://github.com/linuxwacom/input-wacom/issues/288 Fixes: 7fb0413baa7f (HID: wacom: Use "Confidence" flag to prevent reporting invalid contacts) CC: stable@vger.kernel.org Signed-off-by: Jason Gerecke Reviewed-by: Ping Cheng Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman commit bcd09e3d334dec291aedec8a9c6a45643088608a Author: Jann Horn Date: Fri Jan 14 14:33:30 2022 +0100 HID: uhid: Fix worker destroying device without any protection commit 4ea5763fb79ed89b3bdad455ebf3f33416a81624 upstream. uhid has to run hid_add_device() from workqueue context while allowing parallel use of the userspace API (which is protected with ->devlock). But hid_add_device() can fail. Currently, that is handled by immediately destroying the associated HID device, without using ->devlock - but if there are concurrent requests from userspace, that's wrong and leads to NULL dereferences and/or memory corruption (via use-after-free). Fix it by leaving the HID device as-is in the worker. We can clean it up later, either in the UHID_DESTROY command handler or in the ->release() handler. Cc: stable@vger.kernel.org Fixes: 67f8ecc550b5 ("HID: uhid: fix timeout when probe races with IO") Signed-off-by: Jann Horn Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman commit 7c761641df3eac99583cbde01b46f839b5a99428 Author: Desmond Cheong Zhi Xi Date: Thu Sep 2 23:13:06 2021 -0400 Bluetooth: fix init and cleanup of sco_conn.timeout_work commit 49d8a5606428ca0962d09050a5af81461ff90fbb upstream. Before freeing struct sco_conn, all delayed timeout work should be cancelled. Otherwise, sco_sock_timeout could potentially use the sco_conn after it has been freed. Additionally, sco_conn.timeout_work should be initialized when the connection is allocated, not when the channel is added. This is because an sco_conn can create channels with multiple sockets over its lifetime, which happens if sockets are released but the connection isn't deleted. Fixes: ba316be1b6a0 ("Bluetooth: schedule SCO timeouts with delayed_work") Signed-off-by: Desmond Cheong Zhi Xi Signed-off-by: Luiz Augusto von Dentz [OP: adjusted context for 4.14] Signed-off-by: Ovidiu Panait Signed-off-by: Greg Kroah-Hartman commit fea63ccd928c01573306983346588b26cffb5572 Author: Desmond Cheong Zhi Xi Date: Tue Aug 10 12:14:05 2021 +0800 Bluetooth: schedule SCO timeouts with delayed_work commit ba316be1b6a00db7126ed9a39f9bee434a508043 upstream. struct sock.sk_timer should be used as a sock cleanup timer. However, SCO uses it to implement sock timeouts. This causes issues because struct sock.sk_timer's callback is run in an IRQ context, and the timer callback function sco_sock_timeout takes a spin lock on the socket. However, other functions such as sco_conn_del and sco_conn_ready take the spin lock with interrupts enabled. This inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} lock usage could lead to deadlocks as reported by Syzbot [1]: CPU0 ---- lock(slock-AF_BLUETOOTH-BTPROTO_SCO); lock(slock-AF_BLUETOOTH-BTPROTO_SCO); To fix this, we use delayed work to implement SCO sock timouts instead. This allows us to avoid taking the spin lock on the socket in an IRQ context, and corrects the misuse of struct sock.sk_timer. As a note, cancel_delayed_work is used instead of cancel_delayed_work_sync in sco_sock_set_timer and sco_sock_clear_timer to avoid a deadlock. In the future, the call to bh_lock_sock inside sco_sock_timeout should be changed to lock_sock to synchronize with other functions using lock_sock. However, since sco_sock_set_timer and sco_sock_clear_timer are sometimes called under the locked socket (in sco_connect and __sco_sock_close), cancel_delayed_work_sync might cause them to sleep until an sco_sock_timeout that has started finishes running. But sco_sock_timeout would also sleep until it can grab the lock_sock. Using cancel_delayed_work is fine because sco_sock_timeout does not change from run to run, hence there is no functional difference between: 1. waiting for a timeout to finish running before scheduling another timeout 2. scheduling another timeout while a timeout is running. Link: https://syzkaller.appspot.com/bug?id=9089d89de0502e120f234ca0fc8a703f7368b31e [1] Reported-by: syzbot+2f6d7c28bb4bf7e82060@syzkaller.appspotmail.com Tested-by: syzbot+2f6d7c28bb4bf7e82060@syzkaller.appspotmail.com Signed-off-by: Desmond Cheong Zhi Xi Signed-off-by: Luiz Augusto von Dentz [OP: adjusted context for 4.14] Signed-off-by: Ovidiu Panait Signed-off-by: Greg Kroah-Hartman commit 0ada2bcc2c33b69a6a6701e64746ee2e1f140c2f Author: Larry Finger Date: Wed Dec 15 11:11:05 2021 -0600 rtlwifi: rtl8192cu: Fix WARNING when calling local_irq_restore() with interrupts enabled commit 8b144dedb928e4e2f433a328d58f44c3c098d63e upstream. Syzbot reports the following WARNING: [200~raw_local_irq_restore() called with IRQs enabled WARNING: CPU: 1 PID: 1206 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x1d/0x20 kernel/locking/irqflag-debug.c:10 Hardware initialization for the rtl8188cu can run for as long as 350 ms, and the routine may be called with interrupts disabled. To avoid locking the machine for this long, the current routine saves the interrupt flags and enables local interrupts. The problem is that it restores the flags at the end without disabling local interrupts first. This patch fixes commit a53268be0cb9 ("rtlwifi: rtl8192cu: Fix too long disable of IRQs"). Reported-by: syzbot+cce1ee31614c171f5595@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Fixes: a53268be0cb9 ("rtlwifi: rtl8192cu: Fix too long disable of IRQs") Signed-off-by: Larry Finger Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20211215171105.20623-1-Larry.Finger@lwfinger.net Signed-off-by: Greg Kroah-Hartman commit 05e32b27745b7d6bae423f2a8f1b53b0bedb265f Author: Johan Hovold Date: Tue Oct 26 11:55:11 2021 +0200 media: uvcvideo: fix division by zero at stream start commit 8aa637bf6d70d2fb2ad4d708d8b9dd02b1c095df upstream. Add the missing bulk-endpoint max-packet sanity check to uvc_video_start_transfer() to avoid division by zero in uvc_alloc_urb_buffers() in case a malicious device has broken descriptors (or when doing descriptor fuzz testing). Note that USB core will reject URBs submitted for endpoints with zero wMaxPacketSize but that drivers doing packet-size calculations still need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip endpoint descriptors with maxpacket=0")). Fixes: c0efd232929c ("V4L/DVB (8145a): USB Video Class driver") Cc: stable@vger.kernel.org # 2.6.26 Signed-off-by: Johan Hovold Reviewed-by: Kieran Bingham Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman commit 51eeaa958a96773bf37fac2fbd7155980eb23a45 Author: Christophe JAILLET Date: Mon Dec 27 19:09:18 2021 +0100 orangefs: Fix the size of a memory allocation in orangefs_bufmap_alloc() commit 40a74870b2d1d3d44e13b3b73c6571dd34f5614d upstream. 'buffer_index_array' really looks like a bitmap. So it should be allocated as such. When kzalloc is called, a number of bytes is expected, but a number of longs is passed instead. In get(), if not enough memory is allocated, un-allocated memory may be read or written. So use bitmap_zalloc() to safely allocate the correct memory size and avoid un-expected behavior. While at it, change the corresponding kfree() into bitmap_free() to keep the semantic. Fixes: ea2c9c9f6574 ("orangefs: bufmap rewrite") Signed-off-by: Christophe JAILLET Signed-off-by: Mike Marshall Signed-off-by: Greg Kroah-Hartman commit 0ee65ce02b1c3f5859a5df2917a2c92ca587f4fa Author: Nathan Chancellor Date: Thu Oct 14 14:19:16 2021 -0700 drm/i915: Avoid bitwise vs logical OR warning in snb_wm_latency_quirk() commit 2e70570656adfe1c5d9a29940faa348d5f132199 upstream. A new warning in clang points out a place in this file where a bitwise OR is being used with boolean types: drivers/gpu/drm/i915/intel_pm.c:3066:12: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical] changed = ilk_increase_wm_latency(dev_priv, dev_priv->wm.pri_latency, 12) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This construct is intentional, as it allows every one of the calls to ilk_increase_wm_latency() to occur (instead of short circuiting with logical OR) while still caring about the result of each call. To make this clearer to the compiler, use the '|=' operator to assign the result of each ilk_increase_wm_latency() call to changed, which keeps the meaning of the code the same but makes it obvious that every one of these calls is expected to happen. Link: https://github.com/ClangBuiltLinux/linux/issues/1473 Reported-by: Nick Desaulniers Signed-off-by: Nathan Chancellor Suggested-by: Dávid Bolvanský Reviewed-by: Nick Desaulniers Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20211014211916.3550122-1-nathan@kernel.org Signed-off-by: Greg Kroah-Hartman commit a9a207a09051c5b7c7f9caaf9fa681524694d67f Author: Nathan Chancellor Date: Thu Oct 14 14:57:03 2021 -0700 staging: wlan-ng: Avoid bitwise vs logical OR warning in hfa384x_usb_throttlefn() commit 502408a61f4b7eb4713f44bd77f4a48e6cb1b59a upstream. A new warning in clang points out a place in this file where a bitwise OR is being used with boolean expressions: In file included from drivers/staging/wlan-ng/prism2usb.c:2: drivers/staging/wlan-ng/hfa384x_usb.c:3787:7: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical] ((test_and_clear_bit(THROTTLE_RX, &hw->usb_flags) && ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/staging/wlan-ng/hfa384x_usb.c:3787:7: note: cast one or both operands to int to silence this warning 1 warning generated. The comment explains that short circuiting here is undesirable, as the calls to test_and_{clear,set}_bit() need to happen for both sides of the expression. Clang's suggestion would work to silence the warning but the readability of the expression would suffer even more. To clean up the warning and make the block more readable, use a variable for each side of the bitwise expression. Link: https://github.com/ClangBuiltLinux/linux/issues/1478 Signed-off-by: Nathan Chancellor Link: https://lore.kernel.org/r/20211014215703.3705371-1-nathan@kernel.org Signed-off-by: Greg Kroah-Hartman commit cc86b3b2cf0fa7d427a531bbeafd91889a5feb32 Author: Eric Biggers Date: Mon Dec 20 16:41:57 2021 -0600 random: fix data race on crng init time commit 009ba8568be497c640cab7571f7bfd18345d7b24 upstream. _extract_crng() does plain loads of crng->init_time and crng_global_init_time, which causes undefined behavior if crng_reseed() and RNDRESEEDCRNG modify these corrently. Use READ_ONCE() and WRITE_ONCE() to make the behavior defined. Don't fix the race on crng->init_time by protecting it with crng->lock, since it's not a problem for duplicate reseedings to occur. I.e., the lockless access with READ_ONCE() is fine. Fixes: d848e5f8e1eb ("random: add new ioctl RNDRESEEDCRNG") Fixes: e192be9d9a30 ("random: replace non-blocking pool with a Chacha20-based CRNG") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers Acked-by: Paul E. McKenney Signed-off-by: Jason A. Donenfeld Signed-off-by: Greg Kroah-Hartman commit f812d9266689e01fbec917e99dfeedf54cf9c78d Author: Eric Biggers Date: Mon Dec 20 16:41:56 2021 -0600 random: fix data race on crng_node_pool commit 5d73d1e320c3fd94ea15ba5f79301da9a8bcc7de upstream. extract_crng() and crng_backtrack_protect() load crng_node_pool with a plain load, which causes undefined behavior if do_numa_crng_init() modifies it concurrently. Fix this by using READ_ONCE(). Note: as per the previous discussion https://lore.kernel.org/lkml/20211219025139.31085-1-ebiggers@kernel.org/T/#u, READ_ONCE() is believed to be sufficient here, and it was requested that it be used here instead of smp_load_acquire(). Also change do_numa_crng_init() to set crng_node_pool using cmpxchg_release() instead of mb() + cmpxchg(), as the former is sufficient here but is more lightweight. Fixes: 1e7f583af67b ("random: make /dev/urandom scalable for silly userspace programs") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers Acked-by: Paul E. McKenney Signed-off-by: Jason A. Donenfeld Signed-off-by: Greg Kroah-Hartman commit 1eb21516779ae4a6fafe54436c0d3de44151f27c Author: Brian Silverman Date: Wed Jan 5 16:29:50 2022 -0800 can: gs_usb: gs_can_start_xmit(): zero-initialize hf->{flags,reserved} commit 89d58aebe14a365c25ba6645414afdbf4e41cea4 upstream. No information is deliberately sent in hf->flags in host -> device communications, but the open-source candleLight firmware echoes it back, which can result in the GS_CAN_FLAG_OVERFLOW flag being set and generating spurious ERRORFRAMEs. While there also initialize the reserved member with 0. Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/all/20220106002952.25883-1-brian.silverman@bluerivertech.com Link: https://github.com/candle-usb/candleLight_fw/issues/87 Cc: stable@vger.kernel.org Signed-off-by: Brian Silverman [mkl: initialize the reserved member, too] Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman commit ace107a5ec5155a869d50fbcf8a05cbf5614e195 Author: Marc Kleine-Budde Date: Fri Dec 10 10:03:09 2021 +0100 can: gs_usb: fix use of uninitialized variable, detach device on reception of invalid USB data commit 4a8737ff068724f509d583fef404d349adba80d6 upstream. The received data contains the channel the received data is associated with. If the channel number is bigger than the actual number of channels assume broken or malicious USB device and shut it down. This fixes the error found by clang: | drivers/net/can/usb/gs_usb.c:386:6: error: variable 'dev' is used | uninitialized whenever 'if' condition is true | if (hf->channel >= GS_MAX_INTF) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ | drivers/net/can/usb/gs_usb.c:474:10: note: uninitialized use occurs here | hf, dev->gs_hf_size, gs_usb_receive_bulk_callback, | ^~~ Link: https://lore.kernel.org/all/20211210091158.408326-1-mkl@pengutronix.de Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman commit b2069a5c193d8f41e20e8da06c03937001fffe48 Author: Andy Shevchenko Date: Mon Nov 1 21:00:08 2021 +0200 mfd: intel-lpss: Fix too early PM enablement in the ACPI ->probe() commit c9e143084d1a602f829115612e1ec79df3727c8b upstream. The runtime PM callback may be called as soon as the runtime PM facility is enabled and activated. It means that ->suspend() may be called before we finish probing the device in the ACPI case. Hence, NULL pointer dereference: intel-lpss INT34BA:00: IRQ index 0 not found BUG: kernel NULL pointer dereference, address: 0000000000000030 ... Workqueue: pm pm_runtime_work RIP: 0010:intel_lpss_suspend+0xb/0x40 [intel_lpss] To fix this, first try to register the device and only after that enable runtime PM facility. Fixes: 4b45efe85263 ("mfd: Add support for Intel Sunrisepoint LPSS devices") Reported-by: Orlando Chamberlain Reported-by: Aditya Garg Signed-off-by: Andy Shevchenko Tested-by: Aditya Garg Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20211101190008.86473-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman commit 5472333dca4fee717afd7b7f5fb7dc4d893510a4 Author: Alan Stern Date: Fri Dec 31 21:07:12 2021 -0500 USB: Fix "slab-out-of-bounds Write" bug in usb_hcd_poll_rh_status commit 1d7d4c07932e04355d6e6528d44a2f2c9e354346 upstream. When the USB core code for getting root-hub status reports was originally written, it was assumed that the hub driver would be its only caller. But this isn't true now; user programs can use usbfs to communicate with root hubs and get status reports. When they do this, they may use a transfer_buffer that is smaller than the data returned by the HCD, which will lead to a buffer overflow error when usb_hcd_poll_rh_status() tries to store the status data. This was discovered by syzbot: BUG: KASAN: slab-out-of-bounds in memcpy include/linux/fortify-string.h:225 [inline] BUG: KASAN: slab-out-of-bounds in usb_hcd_poll_rh_status+0x5f4/0x780 drivers/usb/core/hcd.c:776 Write of size 2 at addr ffff88801da403c0 by task syz-executor133/4062 This patch fixes the bug by reducing the amount of status data if it won't fit in the transfer_buffer. If some data gets discarded then the URB's completion status is set to -EOVERFLOW rather than 0, to let the user know what happened. Reported-and-tested-by: syzbot+3ae6a2b06f131ab9849f@syzkaller.appspotmail.com Signed-off-by: Alan Stern Cc: Link: https://lore.kernel.org/r/Yc+3UIQJ2STbxNua@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman commit 5f7e7d805e2ef9c3def70863a565d0f5af3bf7bb Author: Alan Stern Date: Sat Jan 1 14:52:14 2022 -0500 USB: core: Fix bug in resuming hub's handling of wakeup requests commit 0f663729bb4afc92a9986b66131ebd5b8a9254d1 upstream. Bugzilla #213839 reports a 7-port hub that doesn't work properly when devices are plugged into some of the ports; the kernel goes into an unending disconnect/reinitialize loop as shown in the bug report. This "7-port hub" comprises two four-port hubs with one plugged into the other; the failures occur when a device is plugged into one of the downstream hub's ports. (These hubs have other problems too. For example, they bill themselves as USB-2.0 compliant but they only run at full speed.) It turns out that the failures are caused by bugs in both the kernel and the hub. The hub's bug is that it reports a different bmAttributes value in its configuration descriptor following a remote wakeup (0xe0 before, 0xc0 after -- the wakeup-support bit has changed). The kernel's bug is inside the hub driver's resume handler. When hub_activate() sees that one of the hub's downstream ports got a wakeup request from a child device, it notes this fact by setting the corresponding bit in the hub->change_bits variable. But this variable is meant for connection changes, not wakeup events; setting it causes the driver to believe the downstream port has been disconnected and then connected again (in addition to having received a wakeup request). Because of this, the hub driver then tries to check whether the device currently plugged into the downstream port is the same as the device that had been attached there before. Normally this check succeeds and wakeup handling continues with no harm done (which is why the bug remained undetected until now). But with these dodgy hubs, the check fails because the config descriptor has changed. This causes the hub driver to reinitialize the child device, leading to the disconnect/reinitialize loop described in the bug report. The proper way to note reception of a downstream wakeup request is to set a bit in the hub->event_bits variable instead of hub->change_bits. That way the hub driver will realize that something has happened to the port but will not think the port and child device have been disconnected. This patch makes that change. Cc: Tested-by: Jonathan McDowell Signed-off-by: Alan Stern Link: https://lore.kernel.org/r/YdCw7nSfWYPKWQoD@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman commit fd7f0b44695228e90aeefd8df82d02c209194017 Author: Johan Hovold Date: Mon Oct 25 13:39:44 2021 +0200 Bluetooth: bfusb: fix division by zero in send path commit b5e6fa7a12572c82f1e7f2f51fbb02a322291291 upstream. Add the missing bulk-out endpoint sanity check to probe() to avoid division by zero in bfusb_send_frame() in case a malicious device has broken descriptors (or when doing descriptor fuzz testing). Note that USB core will reject URBs submitted for endpoints with zero wMaxPacketSize but that drivers doing packet-size calculations still need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip endpoint descriptors with maxpacket=0")). Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman